Cobalt as chemical modifier to improve chromium sensitivity and minimize matrix effects in tungsten coil atomic emission spectrometry

Cobalt is used as chemical modifier to improve sensitivity and minimize matrix effects in Cr determinations by tungsten coil atomic emission spectrometry (WCAES). The atomizer is a tungsten filament extracted from microscope light bulbs. A solid-state power supply and a handheld CCD-based spectrometer are also used in the instrumental setup. In the presence of 1000 mg L⁻¹ Co, WCAES limit of detection for Cr (λ = 425.4 nm) is calculated as 0.070 mg L⁻¹; a 10-fold improvement compared to determinations without Co modifier. The mechanism involved in such signal enhancement is similar to the one observed in ICP OES and ICP-MS determinations of As and Se in the presence of C. Cobalt increases the population of Cr⁺ by charge transfer reactions. In a second step, Cr⁺/e⁻ recombination takes place, which results in a larger population of excited-state Cr atoms. This alternative excitation route is energetically more efficient than heat transfer from atomizer and gas phase to analyte atoms. A linear dynamic range of 0.25–10 mg L⁻¹ and repeatability of 3.8% (RSD, n = 10) for a 2.0 mg L⁻¹ Cr solution are obtained with this strategy. The modifier high concentration also contributes to improving accuracy due to a matrix-matching effect. The method was applied to a certified reference material of Dogfish Muscle (DORM-2) and no statistically significant difference was observed between determined and certified Cr values at a 95% confidence level. Spike experiments with bottled water samples resulted in recoveries between 93% and 112%.     

Increased Antioxidant Activity and Changes in Phenolic Profile of Kalanchoe pinnata (Lamarck) Persoon (Crassulaceae) Specimens Grown Under Supplemental Blue Light

Antioxidant compounds protect plants against oxidative stress caused by environmental conditions. Different light qualities, such as UV‐A radiation and blue light, have shown positive effects on the production of phenols in plants. Kalanchoe pinnata (Lamarck) Persoon (Crassulaceae) is used for treating wounds and inflammations. Some of these beneficial effects are attributed to the antioxidant activity of plant components. We investigated the effects of blue light and UV‐A radiation supplementation on the total phenol content, antioxidant activity and chromatographic profile of aqueous extracts from leaves of K. pinnata. Monoclonal plants were grown under white light, white plus blue light and white plus UV‐A radiation. Supplemental blue light improved the antioxidant activity and changed the phenolic profile of the extracts. Analysis by HPLC of supplemental blue‐light plant extracts revealed a higher proportion of the major flavonoid quercetin 3‐O‐α‐l ‐arabinopyranosyl (1→2) α‐l ‐rhamnopyranoside, as well as the presence of a wide variety of other phenolic substances. These findings may explain the higher antioxidant activity observed for this extract. Blue light is proposed as a supplemental light source in the cultivation of K. pinnata, to improve its antioxidant activity.     

Chemoselective Synthesis of Mannich Adducts from 1,4-Naphthoquinones and Profile as Autophagic Inducers in Oral Squamous Cell Carcinoma

Oral squamous cell carcinoma (OSCC) is a worldwide public health problem, accounting for approximately 90% of all oral cancers, and is the eighth most common cancer in men. Cisplatin and carboplatin are the main chemotherapy drugs used in the clinic. However, in addition to their serious side effects, such as damage to the nervous system and kidneys, there is also drug resistance. Thus, the development of new drugs becomes of great importance. Naphthoquinones have been described with antitumor activity. Some of them are found in nature, but semi synthesis has been used as strategy to find new chemical entities for the treatment of cancer. In the present study, we promote a multiple component reaction (MCR) among lawsone, arylaldehydes, and benzylamine to produce sixteen chemoselectively derivated Mannich adducts of 1,4-naphthoquinones in good yield (up to 97%). The antitumor activities and molecular mechanisms of action of these compounds were investigated in OSCC models and the compound 6a induced cytotoxicity in three different tumor cell lines (OSCC4, OSCC9, and OSCC25) and was more selective (IS > 2) for tumor cells than the chemotropic drug carboplatin and the controls lapachol and shikonin, which are chemically similar compounds with cytotoxic effects. The 6a selectively and significantly reduced the amount of cell colony growth, was not hemolytic, and tolerable in mice with no serious side effects at a concentration of 100 mg/kg with a LD₅₀ of 150 mg/kg. The new compound is biologically stable with a profile similar to carboplatin. Morphologically, 6a does not induce cell retraction or membrane blebs, but it does induce intense vesicle formation and late emergence of membrane bubbles. Exploring the mechanism of cell death induction, compound 6a does not induce ROS formation, and cell viability was not affected by inhibitors of apoptosis (ZVAD) and necroptosis (necrostatin 1). Autophagy followed by a late apoptosis process appears to be the death-inducing pathway of 6a, as observed by increased viability by the autophagy inhibitor (3-MA) and by the appearance of autophagosomes, later triggering a process of late apoptosis with the presence of caspase 3/7 and DNA fragmentation. Molecular modeling suggests the ability of the compound to bind to topoisomerase I and II and with greater affinity to hPKM2 enzyme than controls, which could explain the mechanism of cell death by autophagy. Finally, the in-silico prediction of drug-relevant properties showed that compound 6a has a good pharmacokinetic profile when compared to carboplatin and doxorubicin. Among the sixteen naphthoquinones tested, compound 6a was the most effective and is highly selective and well tolerated in animals. The induction of cell death in OSCC through autophagy followed by late apoptosis possibly via inhibition of the PKM2 enzyme points to a promising potential of 6a as a new preclinical anticancer candidate.     

New Approach to Determine the Phase Transition Temperature,Cloud Point,of Thermoresponsive Polymers

In this study, a novel method to determine the cloud point temperature variation in aqueous solutions of thermoresponsive homo- and copolymers was developed. Poly(N-vinylcaprolactam) (PVCL) and triblock copolymers of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-vinylcaprolactam)-b-(t-butyl acrylate-co-acrylic acid) (P[(tBA-co-AA)-b-PVCL-b-P(tBA-co-AA)] were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and used as models. The incorporation of AA units (hydrophilic segments) into the polymeric chain of PVCL influenced the phase transition, increasing the cloud point temperature of the final copolymer. The cloud point temperatures of the PVCL and the triblock copolymer P(tBA-co-AA)-b-PVCL-b-P(tBA-co-AA) were determined by measuring the transmittance of aqueous solutions of the polymers in a Turbiscan Lab instrument in the range of 29 to 40 C. This is the first study in which Turbiscan Lab is used to determine the cloud point temperature.     

Overview of policies,standards and certifications supporting the European bio-based economy

With the Lisbon agenda, the EU recognizes the important role of an economy driven by innovation in tackling contemporary societal challenges. This transition to innovative and sustainable modes of production and consumption is being shaped by policy efforts and policy instruments, including regulations, certifications, standards and sustainability assessment tools. In this paper, we present an overview of the different public policies and policy measures behind the establishment of a European sustainable bio-based economy. The aim of the paper is to describe the evolution of the policies and policy instruments that affect the establishment of a sustainable and innovative bio-based economy, in order to understand its limits, contradictions and existing gaps.     

A special class of stationary flows for two-dimensional euler equations: A statistical mechanics description. Part II

We continue and conclude our analysis started in Part I (see [CLMP]) by discussing the microcanonical Gibbs measure associated to a N-vortex system in a bounded domain. We investigate the Mean-Field limit for such a system and study the corresponding Microcanonnical Variational Principle for the Mean-Field equation. We discuss and achieve the equivalence of the ensembles for domains in which we have the concentration at (–8)⁺ in the canonical framework. In this case we have the uniqueness of the solutions of the Mean-Field equation. For the other kind of domains, for large values of the energy, there is no equivalence, the entropy is not a concave function of the energy, and the Mean-field equation has more than one solution. In both situations, we have concentration when the energy diverges. The Microcanonical Mean Field Limit for the N-vortex system is proven in the case of equivalence of ensembles.Communicated by J.L. Lebowitz     

Weighted L∞ bounds and uniqueness for the Boltzmann BGK model

We prove rather general L bounds for hydrodynamical fields in terms of weighted L norms of the kinetic density. We use these estimates to prove L bounds and uniqueness for the solution of the BGK Equation, which is a simple relaxation model introduced by Bhatnagar, Gross & Krook to mimic Boltzmann flows.     

One-pot multicomponent synthesis of 1,2,3,4-tetrasubstituted pyrroles catalyzed by [NMPH]CH3SO3

A general method for the synthesis of 1,2,3,4-tetrasubstituted pyrroles by [NMPH]CH₃SO₃ is reported. A full factorial design was performed in order to obtain a more robust and statistically correct optimum condition. The products were obtained in moderate to excellent yields. The developed methodology is very simple, cost-effective, and applicable for tri- and tetra-component reactions.     

A note on the nonlinear stability of a spatially symmetric vlasov-possion flow

We give sufficient conditions for the nonlinear stability of a, possibly non-smooth, spatially homogeneous Vlasov-Poisson flow. Research partially supported by Italian CNR and Ministero della Pubblica Istruzione.     

A Non-Maxwellian Steady Distribution for One-Dimensional Granular Media

We consider a nonlinear Fokker–Planck equation for a one-dimensional granular medium. This is a kinetic approximation of a system of nearly elastic particles in a thermal bath. We prove that homogeneous solutions tend asymptotically in time toward a unique non-Maxwellian stationary distribution.