Environmental formaldehyde analysis by active diffusive sampling with a bundle of polypropylene porous capillaries followed by capillary zone electrophoretic separation and contactless conductivity detection

Compared to other volatile carbonylic compounds present in outdoor air, formaldehyde (CH(2)O) is the most toxic, deserving more attention in terms of indoor and outdoor air quality legislation and control. The analytical determination of CH(2)O in air still presents challenges due to the low-level concentration (in the sub-ppb range) and its variation with sampling site and time. Of the many available analytical methods for carbonylic compounds, the most widespread one is the time consuming collection in cartridges impregnated with 2,4-dinitrophenylhydrazine followed by the analysis of the formed hydrazones by HPLC. The present work proposes the use of polypropylene hollow porous capillary fibers to achieve efficient CH(2)O collection. The Oxyphan fiber (designed for blood oxygenation) was chosen for this purpose because it presents good mechanical resistance, high density of very fine pores and high ratio of collection area to volume of the acceptor fluid in the tube, all favorable for the development of air sampling apparatus. The collector device consists of a Teflon pipe inside of which a bundle of polypropylene microporous capillary membranes was introduced. While the acceptor passes at a low flow rate through the capillaries, the sampled air circulates around the fibers, impelled by a low flow membrane pump (of the type used for aquariums ventilation). The coupling of this sampling technique with the selective and quantitative determination of CH(2)O, in the form of hydroxymethanesulfonate (HMS) after derivatization with HSO(3)(-), by capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C(4)D) enabled the development of a complete analytical protocol for the CH(2)O evaluation in air.     

Transport properties of a co-poly(amide-12-b-ethylene oxide) membrane: A comparative study between experimental and molecular modelling results

An experimental and theoretical study has been used to investigate gas diffusion and solubility in PEBAX^®2533 block copolymer membrane. Molecular simulations using COMPASS force field have been successful in predicting the gas-transport properties of a PEBAX^®2533 block copolymer and of a pure PTMO homopolymer. Gusev–Suter transition state theory (TST) and Monte Carlo methods are used for simulating the transport of five permanent gases (He, H₂, N₂, O₂, CO₂ and CH₄). Theoretical and experimental data have been compared.     

Development and validation of an analytical method for the simultaneous determination of cocaine and its main metabolite, benzoylecgonine, in human hair by gas chromatography/mass spectrometry

A new, simple and rapid procedure has been developed and validated for the determination of cocaine and its main metabolite, benzoylecgonine, in human hair samples. After extraction from within the hair matrix by a mixture of methanol/hydrochloric acid (2:1) at 65 degrees C for 3 h, and sample cleanup by mixed-mode solid-phase extraction (SPE), the extracts were analyzed by gas chromatography/mass spectrometry (GC/MS), after derivatization with N-methyl-N-(trimethylsilyl)trifluoroacetamide with 5% chlorotrimethylsilane. Using a sample size of only 20 mg of hair, limits of detection (LODs) and quantitation (LOQs) were, respectively, 20 and 50 pg/mg for cocaine, and 15 and 50 pg/mg for benzoylecgonine, achieving the cut-off values proposed by the Society of Hair Testing for the analysis of these compounds in hair. The method was found to be linear (weighing factor of 1/x) between the LOQ and 20 ng/mg for both compounds, with correlation coefficients ranging from 0.9974 to 0.9996 for cocaine; and from 0.9981 to 0.9994 for benzoylecgonine. Intra- and interday precision and accuracy were in conformity with the criteria normally accepted in bioanalytical method validation. The sample cleanup step presented a mean absolute recovery greater than 90% for both compounds. The developed method may be useful in forensic toxicology laboratories for the analysis of cocaine and benzoylecgonine in hair samples, taking into account its speed (only 3 h are required for the extraction of the analytes from within the matrix, whereas 5 h or even overnight extractions have been reported) and the low limits achieved (using a single quadrupole mass spectrometer, which is available in most laboratories).     

Ultrastructural analysis and immunocytochemical localization of isolectins in Cratylia mollis seeds

Cratylia mollis is a native forage from the semi-arid region of Northeast, State of Pernambuco, Brazil, whose seeds have been considered an important lectin source. Multiple molecular forms of lectins, carbohydrate-binding proteins, have been purified from C. mollis seeds (Cra Iso) allowing several applications of these purified proteins. In this work seeds were processed for ultrastructural analysis and immunocytochemical localization of the two most abundant isolectins, Cra Iso 1 and Cra Iso 3, with glucose/mannose and galactose specificities, respectively. The ultrastructural analysis revealed a typical plant cell: organelles, nucleus and cellular wall were visualized. The localization of isolectins occurred mainly in the amorphous matrix of protein bodies, and in the cellular walls of the embryonic axis. The results showed that the isolectins, which differ in relation to carbohydrate specificity and glycosylation are located in the same cellular compartment suggesting different functions inside the same subcellular organelle. Cra Iso 1 and Cra Iso 3 distribution in the C. mollis seeds was consistent with the subcellular localization of several legume lectins.     

87Sr solid-state NMR as a structurally sensitive tool for the investigation of materials: antiosteoporotic pharmaceuticals and bioactive glasses

Strontium is an element of fundamental importance in biomedical science. Indeed, it has been demonstrated that Sr(2+) ions can promote bone growth and inhibit bone resorption. Thus, the oral administration of Sr-containing medications has been used clinically to prevent osteoporosis, and Sr-containing biomaterials have been developed for implant and tissue engineering applications. The bioavailability of strontium metal cations in the body and their kinetics of release from materials will depend on their local environment. It is thus crucial to be able to characterize, in detail, strontium environments in disordered phases such as bioactive glasses, to understand their structure and rationalize their properties. In this paper, we demonstrate that (87)Sr NMR spectroscopy can serve as a valuable tool of investigation. First, the implementation of high-sensitivity (87)Sr solid-state NMR experiments is presented using (87)Sr-labeled strontium malonate (with DFS (double field sweep), QCPMG (quadrupolar Carr-Purcell-Meiboom-Gill), and WURST (wideband, uniform rate, and smooth truncation) excitation). Then, it is shown that GIPAW DFT (gauge including projector augmented wave density functional theory) calculations can accurately compute (87)Sr NMR parameters. Last and most importantly, (87)Sr NMR is used for the study of a (Ca,Sr)-silicate bioactive glass of limited Sr content (only ~9 wt %). The spectrum is interpreted using structural models of the glass, which are generated through molecular dynamics (MD) simulations and relaxed by DFT, before performing GIPAW calculations of (87)Sr NMR parameters. Finally, changes in the (87)Sr NMR spectrum after immersion of the glass in simulated body fluid (SBF) are reported and discussed.     

Paramagnetic metal complexes of diamido donor ligands

Recently, considerable attention has been given to the use of multi-dentate amido ligands in the coordination chemistry of a range of transition metals as a means of accessing novel structural motifs and unusual reactivity. Presented herein is a perspective on transition and f-block metal complexes containing diamido donor ligands of the general form [NDN](2-) (D = NR, O, PR). Particular focus is given to paramagnetic metals, which have in general been studied much less than their diamagnetic counterparts despite their potential to exhibit unique structures and diverse reactivity patterns, in addition to their magnetic properties.     

Copper-mediated controlled/"living" radical polymerization in polar solvents: insights into some relevant mechanistic aspects

The field of transition-metal-mediated controlled/"living" radical polymerization (CLRP) has become the subject of intense discussion regarding the mechanism of this widely-used and versatile process. Most mechanistic analyses (atom transfer radical polymerization (ATRP) vs. single-electron transfer living radical polymerization (SET-LRP)) have been based on model experiments, which cannot correctly mimic the true reaction conditions. We present, for the first time, a determination of the [Cu(I)Br]/[L] (L=nitrogen-based chelating ligand) ratio and the extent of Cu(I)Br/L disproportionation during CLRP of methyl acrylate (MA) in dimethylsulfoxide (DMSO) with Cu(0) wire as a transition-metal catalyst source. The results suggest that Cu(0) acts as a supplemental activator and reducing agent of Cu(II)Br(2)/L to Cu(I)Br/L. More importantly, the Cu(I)Br/L species seem to be responsible for the activation of SET-LRP.     

Synchrotron X-ray diffraction characterization of healthy and fluorotic human dental enamel

With the introduction of fluoride as the main anticaries agent used in preventive dentistry, and perhaps an increase in fluoride in our food chain, dental fluorosis has become an increasing world-wide problem. Visible signs of fluorosis begin to become obvious on the enamel surface as opacities, implying some porosity in the tissue. The mechanisms that conduct the formation of fluorotic enamel are unknown, but should involve modifications in the basic physical-chemistry reactions of demineralization and remineralisation of the enamel of the teeth, which is the same reaction of formation of the enamel's hydroxyapatite (HAp) in the maturation phase. The increase of the amount of fluoride inside of the apatite will result in gradual increase of the lattice parameters. The aim of this work is to characterize the healthy and fluorotic enamel in human tooth using Synchrotron X-ray diffraction. All the scattering profile measurements were carried out at the X-ray diffraction beamline (XRD1) at the Brazilian Synchrotron Light Laboratory—LNLS, Campinas, Brazil. X-ray diffraction experiments were performed both in powder samples and polished surfaces. The powder samples were analyzed to obtain the characterization of a typical healthy enamel pattern. The polished surfaces were analyzed in specific areas that have been identified as fluorotic ones. X-ray diffraction data were obtained for all samples and these data were compared with the control samples and also with the literature data.     

Biocompatibility and structural stability of a laminin biopolymer

Polylaminin (polyLM) is a polymerized form of the extracellular matrix protein laminin obtained upon pH acidification. Here microscopy and spectroscopic tools are used to study the cell compatibility and the structural stability of polyLM, aiming at establishing its robustness as a biopolymer for therapeutic use. PolyLM is cell compatible as judged by the efficiency of attachment and neuritogenesis. It is resistant to low temperature. Addition of urea or an increase in hydrostatic pressure leads to polymer disassembly. PolyLM biofilms remain stable for 48 h in contact with cell culture medium. The sedimented polymer recovered after centrifugation and adsorbed on a glass coverslip preserved its original structure and its biological properties.