Statistical classification of road pavements using near field vehicle rolling noise measurements

Low noise surfaces have been increasingly considered as a viable and cost-effective alternative to acoustical barriers. However, road planners and administrators frequently lack information on the correlation between the type of road surface and the resulting noise emission profile. To address this problem, a method to identify and classify different types of road pavements was developed, whereby near field road noise is analyzed using statistical learning methods. The vehicle rolling sound signal near the tires and close to the road surface was acquired by two microphones in a special arrangement which implements the Close-Proximity method. A set of features, characterizing the properties of the road pavement, was extracted from the corresponding sound profiles. A feature selection method was used to automatically select those that are most relevant in predicting the type of pavement, while reducing the computational cost. A set of different types of road pavement segments were tested and the performance of the classifier was evaluated. Results of pavement classification performed during a road journey are presented on a map, together with geographical data. This procedure leads to a considerable improvement in the quality of road pavement noise data, thereby increasing the accuracy of road traffic noise prediction models.     

Antimicrobial and cytotoxic activities of leaves, twigs and stem bark of Scutia buxifolia Reissek

The antimicrobial and cytotoxic activities of the dichloromethane, ethyl acetate and butanolic fractions from the leaves, twigs and stem bark of Scutia buxifolia were evaluated using the broth microdilution method and the brine shrimp lethality method, respectively. Phytochemical analysis was performed by thin layer chromatography (TLC) and high-performance liquid chromatography (HPLC). The antimicrobial results demonstrated that the strongest effect occurred with the butanol fraction from the twigs and the ethyl acetate fraction from the stem bark against Saccharomyces cerevisiae (minimal inhibitory concentration; MIC?=?62.5?μg?mL(-1)), whereas the ethyl acetate and butanolic fractions from the twigs and stem bark were effective against Pseudomonas aeruginosa and Staphylococcus aureus, with MIC values ranging from 125 to 500?μg?mL(-1). LD(50) values varied from 50.00?±?0.22 to 82.23?±?0.34?μg?mL(-1). Quercetin, quercitrin, isoquercitrin and rutin were identified by HPLC and may be partially responsible for the antimicrobial activities observed. This study reports for the first time the antimicrobial and cytotoxic activities of S. buxifolia leaves, twigs and stem bark.     

Easy dual-mode ambient mass spectrometry with Venturi self-pumping, canned air, disposable parts and voltage-free sonic-spray ionization

An exceptionally easy to assemble source for ambient mass spectrometry is described. Based on Venturi easy ambient sonic-spray ionization (V-EASI), the source was further simplified by the use of a can of compressed air which simultaneously provides solution or solvent Venturi self-pumping and continuous, stable and abundant low-noise ion signal via voltage-free sonic-spraying. Further simplification was also attained by the use of inexpensive and readily commercially available parts: a surgical 2-way catheter, an aerosol can of compressed air, a 30 cm long fused-silica capillary and a hypodermic needle. This "Spartan" V-EASI source seems to offer one of the easiest and cheapest ways to make ions for ambient desorption/ionization mass spectrometry analysis of both liquid and solid samples.     

Comparison of two models for phonon assisted tunneling field enhanced emission from defects in Ge measured by DLTS

Deep Level Transient Spectroscopy (DLTS) was used to measure the field enhanced emission rate from a defect introduced in n-type Ge. The defect was introduced through low energy (±80 eV) inductively coupled plasma (ICP) etching using Ar. The defect, named EP_0.31, had an energy level 0.31 eV below the conduction band. Models of Pons and Makram-Ebeid (1979) [2] and Ganichev and Prettl (1997) [3], which describe emission due to phonon assisted tunneling, were fitted to the observed electric field dependence of the emission rate. The model of Pons and Makram-Ebeid fitted the measured emission rate more accurately than Ganichev and Prettl. However the model of Ganichev and Prettl has only two parameters, while the model of Pons and Makram-Ebeid has four. Both models showed a transition in the dominant emission mechanism from a weak electron–phonon coupling below 152.5 K to a strong electron–phonon coupling above 155 K. After the application of a χ² goodness of fit test, it was determined that the model of Pons and Makram-Ebeid describes the data well, while that of Ganichev and Prettl does not.     

Photo-triggered pulsed cavity compressor for bright electron bunches in ultrafast electron diffraction

Temporally resolved observation of microscopic structural dynamics of solids with ultrafast electron diffraction (UED) requires extremely short pulsed, highly charged, monoenergetic electron beams with sufficient transverse coherence length of several unit cells of the investigated samples. However, Coulomb repulsion defeats these parameters in free propagation of an electron pulse initially bright on the photo cathode. We demonstrate a new electron pulse compressor design based on a simple and compact RF structure incorporating a pair of gallium arsenide photoconductive semiconductor switches that are triggered by femtosecond laser pulses, thereby providing a longitudinal voltage gradient of up to 20?V/ps. Our proof of principle experiment achieved compression of bunches containing 26,000 electrons to a duration of below 750?fs and a beam diameter of 300???m in the temporal and spatial focus of the device while maintaining the good beam collimation required for time resolved electron diffraction experiments. The simplicity of the compressor provides a strong incentive for its further development toward practical implementation in sub-relativistic UED experiments requiring the highest possible source brightness.     

The block sphericity test—exact and near‐exact distributions for the likelihood ratio statistic

Using a suitable decomposition of the null hypothesis of the sphericity test for several blocks of variables, into a sequence of conditionally independent null hypotheses, we show that it is possible to obtain the expressions for the likelihood ratio test statistic, for its hth null moment, and for the characteristic function of its logarithm. The exact distribution of the logarithm of the likelihood ratio test statistic is obtained in the form of a sum of a generalized integer gamma distribution with the sum of a given number of independent logbeta distributions, taking the form of a single generalized integer gamma distribution when each set of variables has two variables. The development of near‐exact distributions arises, from the previous decomposition of the null hypothesis and from the consequent‐induced factorization of the characteristic function, as a natural and practical way to approximate the exact distribution of the test statistic. A measure based on the exact and approximating characteristic functions, which gives an upper bound on the distance between the corresponding distribution functions, is used to assess the quality of the near‐exact distributions proposed and to compare them with an asymptotic approximation on the basis of Box's method. Copyright © 2011 John Wiley & Sons, Ltd.     

Production of Thermophilic Endo-β-1,4-xylanases by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> FBSPE-05 Using Agro-industrial By-products

In the present paper, endo-β-1,4-xylanase production by Aspergillus fumigatus was evaluated in solid-state fermentation using low-cost substrates such as sugarcane bagasse (SCB), brewer’s spent grain (BSG), and wheat bran (WB). The partial characterization of the crude enzyme was also performed. In the experimental conditions, the highest levels of endo-β-1,4-xylanase production by A. fumigatus FBSPE-05 occurred within 8 days incubation when using SCB/liquid medium at 1:2 ratio (219.5 U g⁻¹) and 4 days incubation when using WB/liquid medium at 1:1 ratio (215.6 U g⁻¹). Crude enzyme from this last condition was used to enzyme characterization, showing best enzyme activity at 60 °C and pH 6.0, which suggests a thermophilic endoxylanase. The crude enzyme retained 73% of its activity after 1 h at 60 °C, and zymogram has shown three bands of endo-β-1,4-xylanase activity, with different molecular masses. A. fumigatus FBSPE-05 was able to grow and produce good levels of endo-β-1,4-xylanase using agro-industrial by-products, making this strain worthy for further investigation. To our knowledge, this is the first study reporting the use of SCB and/or BSG as sole substrates for endoxylanase production by solid-state fermentation using A. fumigatus.     

Radiation from a D-dimensional collision of shock waves: a remarkably simple fit formula

Recently we estimated the energy radiated in the head-on collision of two equal D-dimensional Aichelburg-Sexl shock waves, for even D, by solving perturbatively, to first order, the Einstein equations in the future of the collision. Here, we report on the solution for the odd D case. After finding the wave forms, we extract the estimated radiated energy for D=5, 7, 9, and 11 and unveil a remarkably simple pattern, given the complexity of the framework: (for all D) the estimated fraction of radiated energy matches the analytic expression 1/2-1/D, within the numerical error (less than 0.1%). Both this fit and the apparent horizon bound converge to 1/2 as D→∞.     

Immobilization of kojic acid in ZnAl-hydrotalcite like compounds

Kojic acid (KOJ) is a melanin synthesis inhibitor widely used as skin lightening agent in topical preparations. Unfortunately it is easily susceptible to photo-oxidation, phenomenon responsible for chemical and organoleptic modifications. The aim of this work was the intercalation of KOJ in hydrotalcite-like compounds (HTlc) in order to stabilize KOJ and to reduce its photolability. Hydrotalcite containing Zn and Al (ZnAl-HTlc) was used as host to obtain the final compound ZnAl-HTlc-KOJ. The intercalation was carried out, after many attempts, by ionic exchange mechanism by means of the strong base EtO^? in anhydrous ethanol/dimethylsulfoxide (DMSO) mixture as solvent in order to generate KOJ^? anions. The final product was characterized by the X-ray powder diffraction (XRPD), FT-IR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and elemental analysis. The intercalated compound was formulated in a siliconic water free self-emulsifying ointment and the in vitro release profile was evaluated. All samples (intercalation compound and its formulation) were submitted also to spectrophotometric assays in order to evaluate the matrix protective effect towards ultraviolet rays.