聚合物电致发光材料研究进展

本文较详细地综述了聚合物电致发光材料的研究进展，重点介绍了聚对苯撑乙烯（ＰＰＶ），并提出了有关聚合物电致发光材料及器件构造研究的一些观点。     

X—射线荧光分析中薄膜试样的面积和厚度对分析结果的影响

本文就薄膜法制样、用X-射线荧光谱法分析稀土样品时,试样面积和厚度对分析结果产生的影响作了定量研究,提出的有关分析条件和参数用于实际样品分析中,获得了满意的分析结果。     

钕对番茄叶挥发性物质诱导效应的研究

以Nd3+诱导番茄叶,测定其对番茄叶挥发性物质组成和含量的影响。结果表明,番茄叶经60 mg.L-1Nd3+诱导120 h后,挥发性物质的总含量较对照组的增加57%;氧合脂类、萜类化合物、芳香族化合物的含量分别较对照组的提高73%,38%和32%。含量最高组分(E)-2-己烯醛较对照组的提高74%。含量显著性提高的组分还包括萜类化合物的β-水芹烯和α-石竹烯,芳香族化合物的丁子香酚,分别较对照组的提高129%,65%和309%。不同浓度的Nd3+均可促进挥发性物质的释放,且随诱导时间呈不同的变化趋势。一定浓度的Nd3+还可诱导番茄叶活性氧的释放以及几丁质酶和-β1,3-葡聚糖酶活力的提高。说明Nd3+可能通过提高番茄叶挥发性物质的含量,以增强其抗病能力。     

稀土-香兰素缩赖氨酸希夫碱配合物的合成、表征及其与DNA作用的研究

合成了香兰素缩赖氨酸希夫碱配体(HL)和15种香兰素缩赖氨酸希夫碱的稀土配合物REL(NO3)2.3H2O(RE=Y,La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu),并通过元素分析、摩尔电导、热重分析、红外光谱、紫外光谱、核磁共振方法对配合物的组成和结构进行了表征。采用紫外光谱和荧光光谱方法初步研究了Nd,Tb,Yb,Lu这4种希夫碱配合物与DNA的相互作用,实验结果显示,随着DNA的加入,配合物在280 nm处的紫外吸收峰不断增强,同时配合物在418 nm左右的荧光发射峰随DNA浓度的增大均逐渐减小,说明配合物和DNA是以静电模式结合。     

The Electrochemical Investigation of MEH-PPV in Ionic Liquid

Ionic liquids are a new kind of room-temperature molten organic salts. It can be used as solvents in the organic/polymeric syntheses, and some of them are called "green" solvents because of its recyclability1. Ionic liquids possess the superior properties, such as thermal stability up to 200(C, involatility and re-designability(for both cation and anion). The ionic liquid employed in this work is [bmim] [PF6]- ( butylmethylimidazolium hexafluorophosphate ) which is immiscible with water and h…     

Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

断续喷洒去溶电热雾化法在电感耦合等离子体原子发射光谱方法中的应用研究

本文所讨论的电热雾化法是采用继续喷洒去溶技术,使试样在石墨炉表面逐步积累的进样方法。文章简要介绍了实验条件的选择和控制以及石墨炉装置的结构,探讨了提高电热雾化法相对检测能力的途径。实验结果表明:谱线黑度值与试样积累时间的对数值之间具有较好的线性关系。     

SYNTHESIS AND CHARACTERIZATION OF ORGANOMONTMORILLONITE AND POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES

The montmorillonites (MMTs), layered, smectite-type silicates, were premodified by two different methods priorto the polymer melt intercalation. In one case MMTs were modified with cetyltrimethylammonium bromide (CTAB), andtermed as organomontmorillonites (OMMTs); in the other case MMTs were modified by nylon, and the products were calledmodified montmorillonites (MMMTs). The effects of CTAB and nylon on the MMTs were investigated by using TG andWAXD. The results show that interlayer spacings of CTAN and nylon modified MMTs are larger than that of sodium MMTs.Then, polyamide 66 (PA 66)/MMT nanocomposites were obtained through the method of melt intercalation of polymers. Thenanocomposites were characterized by WAXD, TEM and Molau experiments. The results indicate that the MMTs dispersehomogeneously in the PA 66 matrix. The mechanical properties of nanocomposites, such as tensile properties and flexuralproperties, were also measured and show a tendency to increase with increase of MMT content and reach the maximumvalues at 5phr MMT content. The heat distortion temperature (HDT) of the nanocomposites (7 phr) is about 32 K higher thanthat of pure PA 66.