Investigation of the Declared Value of Selenium in Food Supplements by HG-AFS

The method of hydride generation atomic fluorescence spectrometry (HG-AFS) was optimised for determination of selenium in food supplements. Due to the high and varied content of Cu, Mg and Zn in the samples, the standard addition method was found to be the most appropriate. The reliability of the method was checked by the independent method of radiochemical neutron activation analysis, and good agreement was found between the two methods. HG-AFS is simple and rapid for Se determination in food supplements based on minerals. Agreement between the selenium values found and declared was worse than 10% in 9 out of 13 supplements. Furthermore, 2 of the 14 supplements did not comply with the recommendations stated in the 27^th edition of the U.S. Pharmacopoeia, which states that minerals and vitamins in food supplements should be in the range of 90 and 200% of the declared value.     

Synthesis and fluorescent properties of some new unsymmetricbis-benzothiazolyl furans and thiophenes

Summary Some newmono- andbis-benzothiazolyl compounds with furan or thiophene nuclei were synthesized by multistep reactions from the corresponding furan and thiophene aldehydes. The data obtained from emission spectra show a large influence of the benzothiazole rings on the relative quantum efficiency of the compounds under investigation.

---

Synthese und Fluoreszenzeigenschaften von neuen unsymmetrischenbis-Benzothiazolylfuranen und thiophenen

Zusammenfassung Einige neuebis-Benzothiazolylverbindungen mit einem Furan- bzw. Thiophenenring wurden in einer mehrstufigen Reaktion dargestellt. Die Fluoreszenzdaten der untersuchten Verbindungen zeigen einen großen Einfluß der Benzothiazolringe auf die relative Fluoreszenzquantenausbeute.

     

Theoretical studies on the conformation of saccharides

Conformations of 2-methoxytetrahydropyran as a model for the six-membered ring in aldopyranosides have been calculated by the PCILO method using the algorithm of the conjugated gradient to optimize the geometry. The calculated geometry of the fourteen basic forms of 2-methoxytetrahydropyran was found to be in agreement with the available data obtained by X-ray diffraction of pyranosides. The results indicate differences in the geometry of 2-methoxytetrahydropyran resulting from the change of the axial vs. equatorial position of the methoxyl group. These changes are particularly meaningful in the values of bond angles and they are in agreement with the anomeric and exoanomeric effects. The experimentally found differences in the energies of an axial (⁴ C ₁) and equatorial (¹ C ₄) conformer, G = 2.9–3.7 kJ/mol, and the dipole moment, = 1.20 ± 0.05 D (1D = 3.33 10^–30mAs) agree well with the calculated values E = 3.18 kJ/mol and <> = 1.18 D which, in turn, suggest that the axial conformer is preferred over the equatorial one by a ratio a:e = 78:22.     

Coulometrische Wismutometrie

Zusammenfassung Durch elektrolytische Oxydation einer Bi-Anode in gesättigter NaCl-Lösung können Bi³⁺-Ionen in Lösung gebracht werden. Dieser Prozeß ermöglicht die coulometrische Bestimmung anwesender Anionen, die schwerlösliche Bi-Verbindungen bilden.Es wurden Semimikro- und Mikrobestimmungen von Phosphationen durch elektrolytisch erzeugte Bi³⁺-Ionen bei konstanter Stromstärke ausgeführt. Die Endpunktbestimmung erfolgte amperometrisch bei konstantem Potential mit einer Indikatorelektrode — tropfende Quecksilberelektrode — und mit einer gesättigten Kalomelelektrode als Bezugselektrode. Die coulometrische Wismutometrie bietet eine weitere Möglichkeit der coulometrischen Eichung volumetrischer Lösungen im Sinne des seinerzeitigen Vorschlags vonTutundi.

---

Summary Bi³⁺ ions can be brought into solution through electrolytic oxidation of a Bi-anode in saturated NaCl solution. This process makes possible the coulometric determination of the anions present that yield difficulty soluble bismuth compounds.Semimicro- and micro-determinations of phosphate ions were made via Bi³⁺-ions produced electrolytically at constant current strength. The endpoint was determined amperometrically at constant potential with an indicator electrode-dropping mercury electrode-and with a saturated calomel electrode as reference electrode. The coulometric bismuthometry affords a further possibility of the coulometric standardization of volumetric solutions in the sense of the proposal previously advanced byTutundi.

---

Résumé On peut utiliser les ions Bi³⁺ en solution par oxydation électrolytique d'une anode en bismuth, en solution de chlorure de sodium saturée. Ce procédé permet le dosage coulométrique des anions présents qui forment des composés peu solubles avec le bismuth.On a mis au point le dosage semimicro et micro des ions phosphates par les ions Bi³⁺ formés électrolytiquement sous intensité constante. On détermine par ampérométrie le point équivalent à potentiel constant à l'aide d'une électrode indicatrice — électrode de mercure à goutte pendante —et avec une électrode au calomel saturée comme électrode de référence. La «bismuthométrie» coulométrique offre de grandes possibilités pour l'étalonnage coulométrique de solutions volumétriques, suivant l'idée queTutundi a émise en son temps.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.

---

Wir danken Herrn Dipl.-Ing.Vladimir Pantovi für seine Hilfe bei unserer experimentellen Arbeit.     

Partial Least-Squares Study of the Effects of Organic Modifier and Physicochemical Properties on the Retention of Some Thiazoles

JPC – Journal of Planar Chromatography – Modern TLC - Reversed-phase (RP) HPTLC with aqueous ammonia-organic modifier (acetonitrile, dioxane, acetone) mobile phases has been used to...     

Flow injection analysis : Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution

The rapid determination of chloride and inorganic phosphate in blood serum based on continuous flow spectrophotometry was adapted to Flow Injection Analysis by applying dialysis as well as differential dilution of the injected samples. In addition to the manual injection procedure, an automated microsampling unit was developed and used. By continuous dialysis, chloride could be determined reproducibly at a sampling rate of 125 samples per hour at sample volumes of 60 μl or less. A similar sampling rate and high precision were obtained for the determination of inorganic phosphate by using differential dilution.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

Some reactions of ammonium or hydrazinium fluorides with xenon difluoride or xenon hexafluoride

The reactions between ammonium fluoride, hydrazinium(1+) fluoride, hydrazinium(2+) fluoride and XeF₂ or XeF₆ were studied. It was found that Xe, HF, N₂ were formed in these reactions. Interestingly enough, beside of these gases nitrogen fluorides in different quantities were formed also. The courses and the products of the above reactions are compared with analogous reactions with KrF₂.     

Stereochemistry of cyclic ether formation—II : Intramolecular cyclisation of secondary aliphatic alcohols to tetrahydrofuran-type ethers

The mechanism and stereochemistry of δ-C atom functionalisation in the reactions of secondary straight-chain aliphatic alcohols with lead tetraacetate, ceric ammonium nitrate, and heavy metal (Pb⁴⁺, Hg²⁺, Ag⁺) salts (AcO)^?1, O^2?, CO₃^2?-halogen (I₂, Br₂, Cl₂) combinations are discussed. By demonstrating the intermediacy of 5-bromo-2-hexanol, it was confirmed that the dark silver oxidebromine induced cyclisation of 2-hexanol (and alcohols in general) involves (as the other hypohalite reactions) intramolecular 1,5-hydrogen abstraction by alkoxy radicals and formation of δ-bromohydrins. A novel and simple procedure for obtaining tetrahydrofurans from alcohols by way of the hypochlorite reaction, using silver or mercuric salts and chlorine, is described.     

Solubility Study of Nimodipine Inclusion Complexation with α- and β-Cyclodextrin and some Substituted Cyclodextrins

The solubility of nimodipine was measured in aqueous solutions of the following cyclodextrins: -cyclodextrin (-CD), hydroxypropyl--CD (HP--CD), -cyclodextrin (-CD), random substituted methyl--CD (M--CD), three hydroxypropyl--CDs (HP--CD) with mutually different average degree of substitution, and hydroxypropyl--cyclodextrin (HP--CD). From the determined linear solubility diagrams the values of the binding constant K₁₁ of the inclusion complexes of nimodipine with the respective CDs were evaluated. The -CDs efficiently solubilized sparingly soluble nimodipine, the highest value of K₁₁ was found for M--CD (1680 M^-1), followed by -CD (550 M^-1) and HP--CDs, where the higher degree of substitution lowered K₁₁. Only slight solubilization of nimodipine was observed in the solutions of the -CDs and HP--CD.