Mutagenicity of flavonoids assayed by bacterial reverse mutation (Ames) test

The mutagenicity of ten flavonoids was assayed by the Ames test, in Salmonella typhimurium strains TA98, TA100 and TA102, with the aim of establishing hydroxylation pattern-mutagenicity relationship profiles. The compounds assessed were: quercetin, kaempferol, luteolin, fisetin, chrysin, galangin, flavone, 3-hydroxyflavone, 5-hydroxyflavone and 7-hydroxyflavone. In the Ames assay, quercetin acted directly and its mutagenicity increased with metabolic activation. In the presence of S9 mix, kaempferol and galangin were mutagenic in the TA98 strain and kaempferol showed signs of mutagenicity in the other strains. The absence of hydroxyl groups, as in flavone, only signs of mutagenicity were shown in strain TA102, after metabolization and, among monohydroxylated flavones (3-hydroxyflavone, 5-hydroxyflavone and 7-hydroxyflavone), the presence of hydroxyl groups only resulted in minor changes. Luteolin and fisetin also showed signs of mutagenicity in strain TA102. Finally, chrysin, which has only two hydroxy groups, at the 5-OH and 7-OH positions, also did not induce mutagenic activity in any of the bacterial strains used, under either activation condition. All the flavonoids were tested at concentrations varying from 2.6 to 30.7 nmol/plate for galangin and 12.1 to 225.0 nmol/plate for other flavonoids. In light of the above, it is necessary to clarify the conditions and the mechanisms that mediate the biological effects of flavonoids before treating them as therapeutical agents, since some compounds can be biotransformed into more genotoxic products; as is the case for galangin, kaempferol and quercetin.     

CaSO4 and its pressure-induced phase transitions. A density functional theory study

Theoretical investigations concerning possible calcium sulfate, CaSO(4), high-pressure polymorphs have been carried out. Total-energy calculations and geometry optimizations have been performed by using density functional theory at the B3LYP level for all crystal structures considered. The following sequence of pressure-driven structural transitions has been found: anhydrite, Cmcm (in parentheses the transition pressure) → monazite-type, P2(1)/n (5 GPa) → barite-type, Pnma (8 GPa), and scheelite-type, I4(1)/a (8 GPa). The equation of state of the different polymorphs is determined, while their corresponding vibrational properties have been calculated and compared with previous theoretical results and experimental data.     

Metal complexes of some asymmetric diaminodiamide ligands—III1,2: Rates of conversion from octahedral to square planar complexes of Ni(II)

Dissociation of the two amide protons from complexes of asymmetric diaminodiamides with Ni(II) in aqueous solution occurs under moderately basic conditions. The loss of the protons is accompanied by a conversion of the complex from octahedral to square planar. The rates of conversion for complexes NiL²⁺ were measured spectrophotometrically and were found to depend linearly on [OH^?]. The diaminodiamide ligands used were S, R, S- and S, S, S-N, N′-dialanylpropylenediamine (DAPN), S, S-N, N′-dialanylethylenediamine (DAEN), R-N, N′-diglycylpropylenediamine (DGPN), and N, N′-diglycylethylenediamine (DGEN). The rates varied in the order SS-DAEN > DGEN > SRS-DAPN > R-DGPN ≈ SSS-DAPN.     

The Binary System Tetradecanedioic Acid–Hexadecanedioic Acid: Polymorphism of the Components and Experimental Phase Diagram

Complementary techniques had to be applied to investigate the binary system tetradecanedioic acid (C₁₄H₂₆O₄)–hexadecanedioic acid (C₁₆H₃₀O₄), because all the forms observed have the same space group (P2₁/c; Z = 2). We studied the polymorphism of the two single compounds and of their mixtures by X‐ray powder diffraction, differential‐scanning calorimetry (DSC), infrared spectroscopy (IR), scanning electron microscopy (SEM), and thermo‐optical microscopy (TOM). The two diacids were found to be isopolymorphic. At low temperature, they crystallize in the same ordered C‐form, and, on heating, adopt the ordered C_h‐form, 1° below their melting point. In contrast to similar compounds (unbranched alkanes, alkanols, and fatty acids), the solid–solid and solid–liquid phase‐transition temperatures decrease with increasing chain length. At low temperature, a new monoclinic form, C_i, appears as a result of the disorder of composition in the mixed samples. There are two [C + C_i]‐type solid–solid domains. On heating, the solid domains are related to solid–liquid domains by a peritectic invariant for compositions rich in C₁₄H₂₆O₄, and by a eutectic invariant for compositions rich in C₁₆H₃₀O₄. At higher temperature, there appears a second peritectic invariant for compositions rich in C₁₄H₂₆O₄, together with a metatectic invariant for compositions rich in C₁₆H₃₀O₄. All the solid forms observed in this binary system are isostructural. Nevertheless, the equilibrium between them is complex near the melting point, and their miscibility in the solid state is reduced.     

Pore size distribution analysis of selected hexagonal mesoporous silicas by grand canonical Monte Carlo simulations

We combine here a regularization procedure with individual adsorption isotherms obtained from grand canonical Monte Carlo simulations in order to obtain reliable pore size distributions. The methodology is applied to two hexagonal high-ordered silica materials: SBA-15 and PHTS, synthesized in our laboratory. Feasible pore size distributions are calculated through an adaptable procedure of deconvolution over the adsorption integral equation, with two necessary inputs: the experimental adsorption data and individual adsorption isotherms, assuming the validity of the independent pore model. The application of the deconvolution procedure implies an adequate grid size evaluation (i.e., numbers of pores and relative pressures to be considered for the inversion, or kernel size), the fulfillment of the discret Picard condition, and the appropriate choice of the regularization parameter (L-curve criteria). Assuming cylindrical geometry for both porous materials, the same set of individual adsorption isotherms generated from molecular simulations can be used to construct the kernel to obtain the PSD of SBA-15 and PHTS. The PSD robustness is measured imposing random errors over the experimental data. Excellent agreement is found between the calculated and the experimental global adsorption isotherms for both materials. Molecular simulations provide new insights into the studied systems, pointing out the need of high-resolution isotherms to describe the presence of complementary microporosity in these materials.     

Solid-phase microextraction coupled with high-performance liquid chromatography for the analysis of heterocyclic aromatic amines

Solid-phase microextraction (SPME) coupled with high-performance liquid chromatography (HPLC) with UV diode array detection (DAD) for the analysis of heterocyclic aromatic amines (HAs) is described. Four kinds of fiber coatings: Carbowax-templated resin (CW-TPR), Carbowax-divinylbenzene (CW-DVB), poly(dimethylsiloxane)-divinylbenzene (PDMS-DVB) and polyacrylate (PA) were evaluated for extraction of nine most biologically active heterocyclic aromatic amines. Different parameters affecting to the microextraction and determination of HAs were studied, such as absorption and desorption time, desorption mode, composition of the solvent for desorption, pH, ionic strength, and percentage of methanol in the sample. To determine these amines in food samples a new simplified procedure is proposed, consisting of treatment of the sample with methanolic NaOH prior microextraction by CW-TPR fiber coating and HPLC-DAD determination. The advantages of this new method are the reduced amounts of time and organic solvents required.     

Study of doubly charged alkaline earth metal and 3-azidopropionitrile complexes by electrospray ionization mass spectrometry

The present work describes a study of the complexation of calcium and magnesium by 3-azidopropionitrile by means of electrospray ionization mass spectrometry (ESI-MS). Complexes were obtained from solutions of calcium and magnesium salts of the type CaX2 and MgX2 (where X = Cl or NO3) in water and methanol/water. The complexes detected were mainly double positively charged, with various stoichiometries not depending on the solvent, since water and 3-azidopropionitrile were always the main ligands. Solvation with methanol was not observed unlike in a previous study of complexation of nickel and cobalt by 3-azidopropionitrile. The complex ions [M(II)Az4(H2O)](2+), [M(II)Az5](2+) (where M = Ca and Mg) are the most abundant for both metals, and both counter ions. Tandem mass spectrometric (MS/MS) analysis showed that, under collision-induced dissociation (CID) conditions, the most important processes occurring were loss of neutral ligands and the replacement of 3-azidopropionitrile by water. A complex species containing reduced alkaline earth metal was due to radical loss, resulting from homolytic cleavage in the azide ligand. Some terminal ions, in the fragmentation sequences, point to the nitrile group as the coordination site in the 3-azidopropionitrile. Density functional theory (DFT) calculations confirmed this coordination site and proved that 3-azidopropionitrile behaves as a monodentate ligand in the systems under study. Moreover, the theoretical study proved that the presence of water ligand introduces stability through a hydrogen bond established between the water molecule and one nitrogen atom of the azido group. In addition, the strong dipole moment of 3-azidopropionitrile (4.76 D), which is mainly related to presence of the nitrile group, favors the stabilization of the metal-ligand complexes through charge-dipole interactions and the coordination of the metal to the nitrile group.     

Controlling optical properties and function of BODIPY by using asymmetric substitution effects

Asymmetrically substituted BODIPY analogues of the dye PM567 have been synthesised from 2-acylpyrroles and pyrroles that bear indene, fluorene or difluorene units. The type of linkage between the fluorene and the BODIPY core plays an important role in the photophysics of the BODIPY chromophore. Indeed, an aliphatic bridge gives rise to an energy-transfer process between the chromophores, whereas a vinyl spacer allows an electronic interaction between them, leading to a large red shift of the spectral bands. The laser action of the new dyes has been analysed under transversal pumping at 10 Hz repetition rate, in both liquid phase and incorporated into solid polymeric matrices. Lasing efficiencies of up to 40% were reached with high photostabilities with the laser output remaining at the initial level after 1×10(5) pump pulses in the same position of the sample. The laser action of the new dyes outperforms the laser behaviour of commercial dyes that emit in the same spectral region. The replacement of fluorene by indene quenches the fluorescence and laser emission, but allows the development of an iron cation fluorescent sensor.