Enhancement of wettability in low density polyethylene films using low pressure glow discharge N2 plasma

Low pressure glow discharge nitrogen plasma has been used to improve wettability in a low density polyethylene (LDPE) film for technical applications. The plasma treatment was carried out at a power of 300 W for different exposure times in the 1–20 min range. Wettability changes were analyzed using contact angle measurements. In addition to this, plasma‐treated samples were subjected to an aging process to determine the durability of the plasma treatment. X‐ray photoelectron spectroscopy, atomic force microscopy, and scanning electron microscopy were used for surface characterization. The nitrogen plasma treatment considerably reduced contact angle values thus indicating an increase in surface wettability. The spectroscopic study showed presence of oxygen‐based species on the plasma‐treated samples, which are mainly generated after the plasma treatment as a consequence of air exposure. These polar species contribute to improve surface functionalization, but this is almost lost during aging due to the hydrophobic recovery process. Microscopic studies revealed that also small changes in surface roughness occurred during the plasma treatment but these are very low compared to surface activation. The results confirmed that low pressure nitrogen can be considered as an environmentally efficient process to improve wettability in low density polyethylene films. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2390–2399, 2007     

Screening of Food Grade Lipases to be Used in Esterification and Interesterification Reactions of Industrial Interest

Seven food grade commercially available lipases were immobilized by covalent binding on polysiloxane–polyvinyl alcohol (POS-PVA) hybrid composite and screened to mediate reactions of industrial interest. The synthesis of butyl butyrate and the interesterification of tripalmitin with triolein were chosen as model reactions. The highest esterification activity (240.63 μM/g min) was achieved by Candida rugosa lipase, while the highest interesterification yield (31%, in 72 h) was achieved by lipase from Rhizopus oryzae, with the production of about 15 mM of the triglycerides C₅₀ and C₅₂. This lipase also showed a good performance in butyl butyrate synthesis, with an esterification activity of 171.14 μM/g min. The results demonstrated the feasibility of using lipases from C. rugosa for esterification and R. oryzae lipase for both esterification and interesterification reactions.     

Analysis of hydroxylated polycyclic aromatic hydrocarbons in urine using comprehensive two-dimensional gas chromatography with a flame ionization detector

The determination of polycyclic aromatic hydrocarbon (PAH) metabolites in human urine is the method of choice for assessing exposure to carcinogenic compounds. The objective of this study was the development of a comprehensive two-dimensional gas chromatography (GC × GC) method using a flame ionisation detector (FID) to simultaneously determine 10 hydroxylated PAH. The method was based on enzymatic deconjugation, liquid–liquid extraction, and trimethylsilyl (TMS) derivatization of the analytes by microwave heating. Satisfactory separation was achieved. The coefficient of variance was 3.8–12.8%. LOD was 0.03–0.18 μg/L, and LOQ was 0.1–0.5 μg/L. The mean recovery was 76%. The method was applied to the analysis of urine from smokers and non-smokers.     

Aqueous solutions for low-temperature photoannealing of functional oxide films: reaching the 400 °C Si-technology integration barrier

Functional oxide films were obtained at low temperature by combination of aqueous precursors and a UV-assisted annealing process (aqueous photochemical solution deposition). For a PbTiO(3) model system, functional ferroelectric perovskite films were prepared at only 400 °C, a temperature compatible with the current Si-technology demands. Intrinsically photosensitive and environmentally friendly aqueous precursors can be prepared for most of the functional multimetal oxides, as additionally demonstrated here for multiferroic BiFeO(3), yielding virtually unlimited possibilities for this low-temperature fabrication technology.     

Enhancing sensitivity and selectivity in the determination of aldehydes in olive oil by use of a Tenax TA trap coupled to a UV-ion mobility spectrometer

A Tenax TA trap was coupled to an ion mobility spectrometer in order to improve basic analytical properties such as sensitivity and selectivity. The analytical performance of this combination was assessed in the determination of volatile aldehydes between 3 and 6 carbon atoms present in olive oil. The aldehydes were extracted and adsorbed into the trap, from which they were thermally desorbed for analysis by UV-Ion Mobility Spectrometry (UV-IMS). Sensitivity was increased by the preconcentration step and selectivity by the combination of temperature programmed thermal desorption and the ability of the ion mobility spectrometer to monitor the desorbed analytes in real time. The limits of detection obtained were lower than 0.3 mg kg(-1) and the relative standard deviation lower than 10%. A one-way analysis of variance (ANOVA) was used to identify significant differences between olive oil grades in terms of peak heights for the target aldehydes.     

Production and Characterization of Extracellular α-Amylase Produced by Wickerhamia sp. X-Fep

A yeast isolate able to produce high levels of extracellular ??-amylase was selected from a collection of 385 yeasts and identified as Wickerhamia sp. by the sequence of the D1/D2 domain of the 26?S rDNA gene. Part of the nucleotide sequence of the amy1-W gene was cloned, and a sequence of 191 amino acids deduced from this gene was analyzed. The peptide contains three characteristic well-conserved regions in the active sites of ??-amylases (EC 3.2.1.1). The enzyme was purified and in situ activity showed only one band with amylolytic activity. The molecular mass of the ??-amylase was estimated at 54?kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis. Enzymatic activity on soluble starch as substrate was optimal at pH 5?C6 and 50 °C. This thermostable enzyme was inhibited by EDTA?CNa₂ and 1,10-phenanthroline; the activity of the dialyzed enzyme was reactivated with Ca²⁺ and Mg²⁺ cations, which indicates that the ??-amylase is a metalloenzyme. ??-Amylase production was induced by starch and maltose and repressed by glucose. The high yield and productivity found in this work makes this Wickerhamia sp. strain a promising candidate for the biotechnological production of ??-amylase.     

Computerized modeling of adenosine triphosphate, adenosine triarsenate and adenosine trivanadate

Computerized molecular models of adenosine triphosphate, adenosine tri-arsenate and adenosine trivanadate have been generated using the molecular mechanics technique. The analysis of structural parameters indicated that, at least theoretically, adenosine triarsenate is a realistic candidate for replacement of adenosine triphosphate in biochemical pathways. On the contrary, the structural arrangement of the inorganic segment of adenosine trivanadate does not seem to be capable of withstanding a swift hydrolytical splitting in aqueous milieu. It was shown that the universal force field as implemented in Gaussian software packages is an appropriate tool for the optimization of less-common bioactive compositions.     

Interaction between the conjugated polyelectrolyte poly{1,4-phenylene[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer and the lecithin mimic 1-O-(l-Arginyl)-2,3-O-dilauroyl-sn-glycerol in aqueous solution

In this paper, the interaction between the water-soluble conjugated polyelectrolyte poly{1,4-phenylene[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer and the amino acid glyceride conjugate 1-O-(L-arginyl)-2,3-O-dilauroyl-sn-glycerol dichlorohydrate (a mimic for the phospholipid lecithin) has been studied in aqueous solution by electronic spectroscopy (absorption and fluorescence) and small-angle neutron scattering (SANS). A significant increase in the polymer fluorescence and blue shift in its emission are observed on association with the surfactant. This is suggested to be due to breakup of polymer aggregates. In addition, the spectroscopic and photophysical data suggest this is followed by the vesicle to ribbon transition characteristic of this surfactant, leading to incorporation of single chains of the polymer within mixed polymer-surfactant aggregates. Support for this comes from preliminary SANS measurements, from which evidence for polymer dissolution and formation of two-dimensional structures has been obtained.     

Rheometry-PIV of shear-thickening wormlike micelles

The shear-thickening behavior of an equimolar semidilute aqueous solution of 40 mM/L cetylpyridinium chloride and sodium salicylate was studied in this work by using a combined method of rheometry and particle image velocimetry (PIV). Experiments were conducted at 27.5 degrees C with Couette, vane-bob, and capillary rheometers in order to explore a wide shear stress range as well as the effect of boundary conditions and time of flow on the creation and destruction of shear-induced structures (SIS). The use of the combined method of capillary rheometry with PIV allowed the detection of fast spatial and temporal variations in the flow kinematics, which are related to the shear-thickening behavior and the dynamics of the SIS but are not distinguished by pure rheometrical measurements. A rich-in-details flow curve was found for this solution, which includes five different regimes. Namely, at very low shear rates a Newtonian behavior was found, followed by a shear thinning one in the second regime. In the third, shear banding was observed, which served as a precursor of the SIS and shear-thickening. The fourth and fifth regimes in the flow curve were separated by a spurtlike behavior, and they clearly evidenced the existence of shear-thickening accompanied by stick-slip oscillations at the wall of the rheometer, which subsequently produced variations in the shear rate under shear stress controlled flow. Such a stick-slip phenomenon prevailed up to the highest shear stresses used in this work and was reflected in asymmetric velocity profiles with spatial and temporal variations linked to the dynamics of creation and breakage of the SIS. The presence of apparent slip at the wall of the rheometer provides an energy release mechanism which leads to breakage of the SIS, followed by their further reformation during the stick part of the cycles. In addition, PIV measurements allowed the detection of apparent slip at the wall, as well as mechanical failures in the bulk of the fluid, which suggests an extra contribution of the shear stress field to the SIS dynamics. Increasing the residence time of the fluid in the flow system enhanced the shear-thickening behavior. Finally, the flow kinematics is described in detail and the true flow curve is obtained, which only partially fits into the scheme of existing theoretical models for shear-thickening solutions.