Multi-iron wells-Dawson heteropolytungstates. Electrochemical probing of siderophoric behavior in sandwich-type complexes

The demetalation process of 10 multi-iron Wells-Dawson polyoxometalates is studied by cyclic voltammetry and controlled potential coulometry. Eight sandwich-type complexes (alphaalphaalphaalpha-Na(16)[(NaOH(2))(2)(Fe(III))(2)(X(2)W(15)O(56))(2)], alphaalphabetaalpha-Na(14)[(NaOH(2))(Fe(III)OH(2))(Fe(III))(2)(X(2)W(15)O(56))(2)], alphabetabetaalpha-Na(12)[(Fe(III)OH(2))(2)(Fe(III))(2)(X(2)W(15)O(56))(2)], and alphabetabetaalpha-Na(14)[(Mn(II)OH(2))(2)(Fe(III))(2)(X(2)W(15)O(56))(2)] (where X = P(V) or As(V))) and two monomeric complexes (alpha-Na(11)[(P(2)(Fe(III)Cl)(2)(Fe(III)OH(2))W(15)O(59))] and alpha-Na(11)[(As(2)(Fe(III)Cl)(2)Fe(III)OH(2))W(15)O(59))]) were selected for this study. All 10 complexes show Fe(III) waves which are well-separated from the redox activity of the W(VI) centers. At room temperature and under mild conditions, iron release from the complexes is observed upon reduction of the Fe(III) centers. This release is controlled by the ionic strength of the medium, the nature and concentration of the anions present in the supporting electrolyte, and by the pH of the solution. This behavior parallels those described for most siderophores which depend on the same parameters.     

A photoacoustic study of the collisional deactivation of CO2 by N2, CO and O2 between 160 and 375 K

A photoacoustic method is used under such experimental conditions that the (01¹0) level of CO₂ gas is not in equilibrium with the other vibrational levels. The rate constants κ′₁₀ characterizing the CO₂ (01¹0) collisional deactivation by N₂, CO and O₂ are measured directly.     

Synthesis and ion selectivity of macrocyclic metacyclophanes analogous to spherand-type calixarenes

Novel macrocyclic compounds, hexahydroxy[1.0.1.0.1.0]- (2b) and octahydroxy[1.0.1.0.1.0.1.0]metacyclophane (2c) have been prepared in 50–70% yield by base-catalyzed condensation of 5,5-di-tert-butyl-2,2-dihydroxybiphenyl (1) with formaldehyde in refluxing xylene. An attempted alkylation of the flexible macrocycles2b and2c with ethyl bromoacetate in the presence of Cs₂CO₃ under acetonitrile reflux gave only one pure stereoisomer3 and4, respectively, while other possible isomers were not observed. The structural characterization of these products is also discussed. The two-phase solvent extraction data indicated that hexaethyl ester3 and octaethyl ester4 show strong metal affinity, comparable with that of the corresponding calix[n]arenes, and a high K⁺ selectivity was observed for octaethyl ester4.¹H-NMR titration of hexaethyl ester3 and octaethyl ester4 with KSCN clearly demonstrate that a 11 complex is formed which is stable on the NMR time scale.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Eine semiempirische Gleichung zur Beschreibung des Lösungsmitteleinflusses auf Statik und Kinetik chemischer Reaktionen. Teil I

A model has been developed for calculating the enthalpy, entropy and free energy change associated with the creation of cavities in a liquid the size of which corresponds to the volume occupied by a solvent molecule. The molar enthalpy change H _cav equals the molar enthalpy of vaporization of the liquid, the free energy change G _cav is given by G _cav=–RT ln (V _m ·p _eq /RT) (V _m =molar volume,p _eq =equilibrium vapor pressure) and is related to the standard free energy of vaporization. This relationship provides an estimate of the free energy of cavity formation required to accomodate a substrate in the liquid. It has been shown, that the free energy of solvation of a substrate can be dissected into different contributions accounting for (1) the concentration dependence of partial molar free energy quantities, (2) the formation of holes in the solvent, (3) the existence of specific, short range solute-solvent interactions and (4) the dielectric polarization of the medium. Application of this concept leads to an equation of the general form G ^S –G ^R =a(DN ^S –DN ^R )+b(AN ^S –AN ^R )+c(G _vp ^oS –G _vp ^oR ), where G represents the free energy of reaction or activation,DN the donor number,AN the acceptor number and G _vp ^o the standard free energy of vaporization of a solventS and a reference solventR, resp.

---

---

Mit 3 Abbildungen     

The synthesis of imidazole-2-thione nucleosides

Ribosylation of the trimethylsilyl derivative ( 1b ) of imidazole-2-thione ( 1a ) using either stannic chloride or silver perchlorate as catalyst resulted in the formation of the acylated derivatives of 1-(β-D-ribofuranosyl)imidazole-2-thione ( 3c ) and 1,3-di-(β-D-ribofuranosyl)imidazole-2-thione ( 4c ) with the latter predominating ( 4c:3c , ca. 2:1 ). The diribosylated nucleoside 4c was shown to be the N,N-disubstituted product rather than the N,S-disubstituted product by ¹H nmr and ¹³C nmr spectroscopy. Employment of the iodine-catalyzed fusion procedure reversed the aforementioned product ratios and provided the monoriboside 3c in excellent yield. When the trimethylsilyl derivative ( 5b ) of 2-methylthioimidazole ( 5a ) was reacted with 2,3,5-tri-O-benzoyl-D-ribofuranosyl bromide ( 2d ) in acetonitrile, the major product was 1,3-di-(2,3,5-tri-O-benzoyl-β-D-ribofuranosyl)-imidazole-2-thione ( 4b ). The formation of 4b in this reaction is thought to arise via the Hilbert-Johnson mechanism.     

A 50% n-octylmethyl, 50% diphenyl-polysiloxane as stationary phase with unique selectivity for gas chromatography

An n-octylmethyl, diphenyl-polysiloxane called SOP-50-Octyl was prepared by a condensation reaction of bis(dimethylamino) n-octylmethylsilane with diphenylsilanediol. The resulting copolymer was a gum with high molecular weight and was obtained with a yield of 80%. 1H and 29Si NMR spectroscopy revealed that the copolymer was a 52% octylmethyl, 48% diphenyl-polysiloxane with random microstructure. Small cyclic impurities could be almost quantitatively removed via a purification step. SOP-50-Octyl was used as stationary phase for the preparation of wall coated open tubular fused silica capillary columns for gas-liquid chromatography. The capillary columns exhibited high separation efficiency and high inertness. The stationary phase offered a unique selectivity due to its unique composition. The Rohrschneider-McReynolds constants indicated a low overall polarity in spite of the high phenyl content, as the polarity was distinctly decreased by the octyl substituent. Furthermore, the octyl substituent was responsible for a high column bleed, reducing the maximum allowable operating temperature to 280 degrees C. The elution temperatures of apolar compounds were increased due to increased interaction of the octyl substituent with the analytes. Some applications with volatile and semi-volatile organic compounds illustrate that SOP-50-Octyl is an excellent choice for confirmational analyses.     

Polyol-Metall-Komplexe. 27. Bis-diolato-antimonate(III) mit Guanosin als Diol

Polyol Metal Complexes. 27. Bis-Diolato Antimonates(III ) with Guanosine as the Diol The complex anions of K₃[Sb^III(Guo1,2′,3′H_?3)₂] · 10 H₂O ( 1 ) and [Co(NH₃)₆][Sb^III(Guo1,2′,3′H_?3)₂] · 9 H₂O ( 2 ) are four-coordinate homoleptic bis(diolato)antimonate(III ) species. The guanosine trianions act as carbohydrate ligands through their cis-furanoidic ribosyl moiety, thus forming no nucleobase–metal bonds.     

Metallic Particles from Complexing Microcapsules Dispersed in a Silica Gel

A new process to control the distribution of metal nanoparticles is proposed. It involves the use of complexing microcapsules obtained by interfacial polycondensation. The latter are hollow spheres constituted of a polymer membrane, containing an insoluble active ingredient, such as a polyacrylic acid, which can complex Co²⁺ ions. These capsules are dispersed in a silica sol followed by thermal treatments and reduction under H₂ which results in metallic Co nanoparticles confined in the capsules domains. The particles do not diffuse in the matrix.     

Synthese und Molekülstrukturen von N‐substituierten Diethylgallium‐2‐pyridylmethylamiden

Synthesis and Molekular Structures of N‐substituted Diethylgallium‐2‐pyridylmethylamides (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1a ) and (2‐pyridylmethyl)‐di(tert‐butyl)silylamine ( 1b ) form with triethylgallane the corresponding red adducts 2a and 2b via an additional nitrogen‐gallium bond. These oily compounds decompose during distillation. Heating under reflux in toluene leads to the elimination of ethane and the formation of the red oils of [(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido]diethylgallane ( 3a ) and [(2‐pyridylmethyl)‐di(tert‐butyl)silylamido]diethylgallane ( 3b ). In order to investigate the thermal stability solvent‐free 3a is heated up to 400 °C. The elimination of ethane is observed again and the C‐C coupling product N, N′‐Bis(diethylgallyl)‐1, 2‐dipyridyl‐1, 2‐bis(tert‐butyldimethylsilyl)amido]ethan ( 4 ) is found in the residue. Substitution of the silyl substituents by another 2‐pyridylmethyl group and the reaction of this bis(2‐pyridylmethyl)amine with GaEt₃ yield triethylgallane‐diethylgallium‐bis(2‐pyridylmethyl)amide ( 5 ). The metalation product adds immediately another equivalent of triethylgallane regardless of the stoichiometry. The reaction of GaEt₃ with 2‐pyridylmethanol gives quantitatively colorless 2‐pyridylmethanolato diethylgallane ( 6 ).