硫与Mn2O3空心球的复合结构及其在锂硫电池中的应用

在水热条件下,以碳球为模板合成了Mn₂O₃空心球,并用作锂硫电池的载硫基底材料。测试结果表明载硫量为51%的Mn₂O₃-S复合材料显示了较高的比容量,良好的循环稳定性和倍率性能。循环100圈后,最终可逆容量仍保持657 mA·g^-1,证明该Mn₂O₃空心球是一种有潜力的载硫基底材料。     

On Moments of Folded and Truncated Multivariate Normal Distributions

Recurrence relations for integrals that involve the density of multivariate normal distributions are developed. These recursions allow fast computation of the moments of folded and truncated multivariate normal distributions. Besides being numerically efficient, the proposed recursions also allow us to obtain explicit expressions of low-order moments of folded and truncated multivariate normal distributions. Supplementary material for this article is available online.     

关于刚体角速度定义的一个注解

给出了一种角速度定义方法. 这种方法基于固连坐标系基矢量和单位矢量的导数给出，但避免使用角速度矩阵概念. 另外从刚体上速度分布的角度，用速度场旋度的方法解释角速度. 可以帮助学生从另外一个角度来理解角速度概念.     

疲劳可靠性二维概率MINER准则

给出在裂纹起始阶段疲劳损伤演化规律的四个基本假设，即单调增、无耦合、可分高、不相交，由损伤力学原理得到等幅加载下个体Ｄ－Ｓ＿ａ－Ｓ＿ｍ－Ｎ等损伤曲面，推导出二维个体Ｍｉｎｅｒ准则，进而建立了母体在变幅以及随机时间历程加载下的二维概率Ｍｉｎｅｒ准则（Ｔｗｏ－ｄｉｍｅｎｓｉｏｎａｌＰｒｏｂａｂｉｌｉｓｔｉｃＭｉｎｅｒ’ｓＲｕｌｅ，即ＴＰＭＩＮＥＲ），并用测度论给予了证明．试验数据验证结果显示ＴＰＭＩＮＥＲ的预测值与试验值吻合良好，对工程结构疲劳可靠性分析有较好的应用价值．     

Influence of surface tension on damping of the oscillations of a viscous incompressible fluid in a cylindrical channel

A numerical calculation is made of small oscillations of a viscous incompressible fluid that fills half of a horizontal cylindrical channel. The calculation is made with and without allowance for surface tension. The results of the calculation show that allowance for surface tension increases the damping of the oscillations. The general properties of problems of the normal oscillations of a heavy and capillary viscous incompressible fluid were studied in [1–3], in which the possibility of applying the Bubnov-Galerkin method to these problems was pointed out. A method for calculating the oscillations of a viscous incompressible fluid that partly fills an arbitrary vessel at large Reynolds numbers was developed in [3–5].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 128–132, May–June, 1980.     

超临界CO_2在内螺纹管内换热特性研究

建立了外径为3 mm的内螺纹管三维实体模型,使用Fluent软件研究了在不同的进口雷诺数和操作压力下超临界二氧化碳在水平内螺纹管内的流动与传热特性。研究表明:不同截面局部换热系数和相同流体局部平均温度下的局部换热系数均随着冷却压力的增大而增大;相同流体局部平均温度下的局部换热系数随着进口雷诺数的增加而增大;不同冷却压力和进口雷诺数下,流体局部平均温度越接近超临界二氧化碳的临界点温度,局部换热系数也就越大。     

A Facile Diversity‐Oriented Multicomponent One‐Pot Synthesis of 3‐Amino‐6,7‐dihydrobenzo[c]thiophen‐4(5H)‐one Derivatives from α‐Oxo‐N,S‐ketene Acetal

A convenient one‐pot multicomponent method for the preparation of 3‐amino‐6,7‐dihydrobenzo[c]thiophen‐4(5H)‐one derivative has been developed. Reaction of 1,3‐cyclohexanedione and phenyl isothiocynate gave α‐oxo‐N,S‐ketene acetal that were reacted in situ with 2‐chloromethylquniazoline‐4‐one derivatives, in the presence of sodium hydride to afford the target compound in reasonable overall yields.     

Factors that regulate the conformation of m-benziporphodimethene complexes: agostic metal-arene interaction, hydrogen bonding, and η2,π coordination

Group 12 and silver(I) tetramethyl‐m‐benziporphodimethene (TMBPDM) complexes with phenyl, methylbenzoate, or nitrophenyl groups as meso substituents were synthesized and fully characterized. The dimeric silver(I) complex displays an unusual η²,π coordination from the β‐pyrrolic C?C bond to the silver ion. All of the complexes displayed a close contact between the metal ion and the inner C(22)? H(22) on the m‐phenylene ring. The downfield chemical shifts of H(22) and large coupling constants between Cd^II and H(22) strongly support the presence of an agostic interaction between the metal ion and inner C(22)–H(22). Crystal structures revealed that the syn form is the predominant conformation for TMBPDM complexes. This is distinctively different from the exclusive anti conformation observed in m‐benziporphyrin and tetraphenyl‐m‐benziporphodimethene (TPBPDM) complexes. Evidently, intramolecular hydrogen‐bonding interactions between axial chloride and methyl groups stabilize syn conformations. Unlike the merely syn conformation observed in the solid‐state structures of TMBPDM complexes that contain an axial chloride, in solution these complexes display highly solvent‐ and temperature‐dependent syn/anti ratio changes. The observation of dynamic ¹H NMR spectroscopic scrambling between syn and anti conformations from the titration of chloride ion into the solution of the TMBPDM complex suggests that axial ligand exchange is a likely pathway for the conversion between syn and anti forms. Theoretical calculations revealed that intermolecular hydrogen‐bonding interactions between the axial chloride and CHCl₃ stabilizes the anti conformation, which explains the increased ratio for the anti form when dichloromethane or chloroform was used as the solvent.     

Proposal for generation of high-intensity monochromatic Cherenkov radiation in THz range by femtosecond electron bunches in impurity-doped semiconductor tube

A novel method to generate high-power THz radiation is proposed. If a beam with a bunch length on the order of 100 fs is injected into an electron–hole plasma of a semiconductor with a plasma frequency on the order of THz, THz wake fields are coherently generated. If the beam moves on the axis of a hollow tube covered by a metal, the frequency spectrum of the radiation is composed of discrete components. Monochromatic radiation is obtained by making only the lowest frequency component coherent.     

Using atmospheric pressure plasma for enhancing the deposition of printing paste on cotton fabric for digital ink-jet printing

Atmospheric pressure plasma (APP) treatment was applied as a pretreatment process to enhance the deposition of printing paste in order to improve the final colour properties of digital ink-jet printed cotton fabrics. Three printing pastes containing natural polymers, i.e. (1) sodium alginate, (2) chitosan and (3) sodium alginate-chitosan mixture, were prepared separately. After APP treatment, cotton fabric was padded with different printing pastes prior to digital ink-jet printing. Experimental results showed that APP pretreatment could increase the colour yield of the digital ink-jet printed cotton fabric significantly even after washing. In addition, other properties such as colour fastness to crocking, colour fastness to laundering, outline sharpness and anti-bacterial properties were also improved when compared with those of the control cotton fabric printed without APP pretreatment. However, the influence of printing paste on the colour properties of the digital ink-jet printed cotton fabrics depended very much on the composition of the printing paste. The scanning electron microscope images evidenced that the APP treatment could enhance the deposition of printing paste on the cotton fabric surface as proved qualitatively by both the contact angle and wetting time measurement as well as quantitatively by both the X-ray photoelectron spectroscopy and carboxyl group/nitrogen content analysis.