On‐line process monitoring of coffee roasting by resonant laser ionisation time‐of‐flight mass spectrometry: bridging the gap from industrial batch roasting to flavour formation inside an individual coffee bean

Resonance‐enhanced multiphoton ionisation time‐of‐flight mass spectrometry (REMPI‐TOFMS) enables the fast and sensitive on‐line monitoring of volatile organic compounds (VOC) formed during coffee roasting. On the one hand, REMPI‐TOFMS was applied to monitor roasting gases of an industrial roaster (1500 kg/h capacity), with the aim of determining the roast degree in real‐time from the transient chemical signature of VOCs. On the other hand, a previously developed μ‐probe sampling device was used to analyse roasting gases from individual coffee beans. The aim was to explore fundamental processes at the individual bean level and link these to phenomena at the batch level. The pioneering single‐bean experiments were conducted in two configurations: (1) VOCs formed inside a bean were sampled in situ, i.e. via a drilled μ‐hole, from the interior, using a μ‐probe (inside). (2) VOCs were sampled on‐line in close vicinity of a single coffee bean's surface (outside). The focus was on VOCs originating from hydrolysis and pyrolytic degradation of chlorogenic acids, like feruloyl quinic acid and caffeoyl quinic acid. The single bean experiments revealed interesting phenomena. First, differences in time–intensity profiles between inside versus outside (time shift of maximum) were observed and tentatively linked to the permeability of the bean's cell walls material. Second, sharp bursts of some VOCs were observed, while others did exhibit smooth release curves. It is believed that these reflect a direct observation of bean popping during roasting. Finally, discrimination between Coffea arabica and Coffea canephora was demonstrated based on high‐mass volatile markers, exclusively present in spectra of Coffea arabica. Copyright © 2013 John Wiley & Sons, Ltd.     

Viscoelastic phase diagram of fluorinated and grafted polymer films and proton‐exchange membranes for fuel cell applications

The influence of temperature and moisture activity on the viscoelastic behavior of fluorinated membranes for fuel cell applications was investigated. Uncrosslinked and crosslinked ethylene tetrafluoroethylene (ETFE)‐based proton‐conducting membranes were prepared by radiation grafting and subsequent sulfonation and their behavior was compared with ETFE base film and commercial Nafion^® NR212 membrane. Uniaxial tensile tests and stress relaxation tests at controlled temperature and relative humidity (RH) were carried out at 30 and 50 °C for 10% < RH < 90%. Grafted films were stiffer and exhibited stronger strain hardening when compared with ETFE. Similarly, both uncrosslinked and crosslinked membranes were stiffer and stronger than Nafion^®. Yield stress was found to decrease and moisture sensitivity to increase on sulfonation. The viscoelastic relaxation of the grafted films was found to obey a power‐law behavior with exponent equal to ?0.04 ± 0.01, a factor of almost 2 lower than ETFE, weakly influenced by moisture and temperature. Moreover, the grafted films presented a higher hygrothermal stability when compared with their membranes counterparts. In the case of membranes, a power‐law behavior at RH < 60% was also observed. However, a markedly different behavior was evident at RH > 60%, with an almost single relaxation time exponential. An exponential decrease of relaxation time with RH from 60 s to 10 s was obtained at RH ≥ 70% and 30 °C. The general behavior of grafted films observed at 30 °C was also obtained at 50 °C. However, an anomalous result was noticed for the membranes, with a higher modulus at 50 °C when compared with 30 °C. This behavior was explained by solvation of the sulfonic acid groups by water absorption creating hydrogen bonding within the clusters. A viscoelastic phase diagram was elaborated to map critical conditions (temperature and RH) for transitions in time‐dependent behavior, from power‐law scaling to exponential scaling. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1139–1148     

Synthesis,Crystal Structure,and Selected Properties of [Au(S2CNH2)2]SCN: A Precursor for Gold Macro-Needles Consisting of Gold Nanoparticles Glued by Graphitic Carbon Nitride

A new preparation route is developed for the synthesis of needle-like crystals of [Au(S₂CNH₂)₂]SCN, which avoids disproportionation of the Au^I salt used as a starting material. In the crystal structure, the two crystallographically independent Au^III centers are in a square-planar environment of two S₂CNH₂ ligands. The Hirshfeld surface analysis reveals the presence of noncovalent intermolecular S⋅⋅⋅S interactions, which are essential for the spatial arrangement of the molecules. Density functional theory (DFT) calculations including dispersion and damping corrections result in a unit cell volume very close to the value determined experimentally. Thermal decomposition in an inert atmosphere generates black needles with lengths of up to 500 μm. X-ray powder diffraction and pair distribution function analyses demonstrate that the needles are composed of nanosized crystals with a volume-weighted average domain size of 20(1) nm. According to results of X-ray photoemission experiments, the black needles are covered by a nitrogen-rich carbon nitride with composition near (CN)₂N. ¹³C solid-state NMR investigations indicate that two different carbon species are present, with signals corresponding well to heptazine units as in melon and triazine units as in poly(triazin imide) type compounds. Scanning transmission electron microscopy tomography evidences that the needles are composed of slightly elongated nanoparticles.     

Molecular dynamics simulations of the interfacial and structural properties of dimethyldodecylamine-N-oxide micelles

A series of large-scale atomistic molecular dynamics simulations were conducted to study the structural and interfacial properties of nonionic dimethyldodecylamine-N-oxide (DDAO) micelles with an aggregation number of 104 in pure water, which was determined using small-angle neutron scattering (SANS). From these simulations, the micelles were found to be generally ellipsoidal in shape with axial ratios of ～1.3-1.4, which agrees well with that found from small-angle neutron scattering measurements. The resulting micelles have an area per DDAO molecule of 94.8 ?(2) and an average number of hydration water molecules per DDAO molecule of ～8. The effect of the encapsulation of ethyl butyrate (CH(3)(CH(2))(2)COOCH(2)CH(3), C(4)) and ethyl caprylate (CH(3)(CH(2))(6)COOCH(2)CH(3), C(8)) on the structural and interfacial properties of the nonionic DDAO aggregates was also examined. In the presence of the C(4) oil molecules, the aggregates were found to be less ellipsoidal and more spherical than the pure DDAO micelles, while the aggregates in the presence of the C(8) oil molecules were almost perfect spheres. In addition, the C(4) oil molecules move into the core of the aggregates, while the C(8) oil molecules stay in the headgroup region of the aggregates. Finally, the structural properties of two micelles formed from different starting states (a "preassembled" sphere and individual DDAO molecules distributing in water) were found to be nearly identical.     

U6 is unsuitable for normalization of serum miRNA levels in patients with sepsis or liver fibrosis

MicroRNA (miRNA) levels in serum have recently emerged as potential novel biomarkers for various diseases. miRNAs are routinely measured by standard quantitative real-time PCR (qPCR); however, the high sensitivity of qPCR demands appropriate normalization to correct for nonbiological variation. Presently, RNU6B (U6) is used for data normalization of circulating miRNAs in many studies. However, it was suggested that serum levels of U6 themselves might differ between individuals. Therefore, no consensus has been reached on the best normalization strategy in ‘circulating miRNA''. We analyzed U6 levels as well as levels of spiked-in SV40-RNA in sera of 44 healthy volunteers, 203 intensive care unit patients and 64 patients with liver fibrosis. Levels of U6 demonstrated a high variability in sera of healthy donors, patients with critical illness and liver fibrosis. This high variability could also be confirmed in sera of mice after the cecal ligation and puncture procedure. Most importantly, levels of circulating U6 were significantly upregulated in sera of patients with critical illness and sepsis compared with controls and correlated with established markers of inflammation. In patients with liver fibrosis, U6 levels were significantly downregulated. In contrast, levels of spiked-in SV40 displayed a significantly higher stability both in human cohorts (healthy, critical illness, liver fibrosis) and in mice. Thus, we conclude that U6 levels in the serum are dysregulated in a disease-specific manner. Therefore, U6 should not be used for data normalization of circulating miRNAs in inflammatory diseases and previous studies using this approach should be interpreted with caution. Further studies are warranted to identify specific regulatory processes of U6 levels in sepsis and liver fibrosis.     

Coordination Chemistry of Acrylamide 4. Crystal Structures and IR Spectroscopic Properties of Acrylamide Complexes with CoII,NiII, and ZnII nitrates

Acrylamide complexes of metal nitrates: [M(O‐OC(NH₂)CHCH₂)_n(H₂O)_m][NO₃]₂ (M = Co( 1 ), Ni( 2 ) (n = 6 and m = 0) and Zn( 3 ) (n = 4 and m = 2)) have been determined by using single crystal X‐ray diffraction analysis. All complexes crystallize in the triclinic space group . The structures of 1 and 2 represent octahedral species [M(AAm)₆]²⁺ (AAm = O‐OC(NH₂)CHCH₂ and M = Co or Ni) and uncoordinated nitrate ions. The structure of 3 involves the octahedral cation [Zn(AAm)₄(H₂O)₂]²⁺ in which the Zn²⁺ environment includes oxygen atoms of four acrylamide and two water molecules that are stabilized using ionic nitrate ions. The observations of the solid‐state IR spectroscopic vibrational frequencies of these acrylamide complexes are in agreement with the crystal structures.     

Electronic control of chiral quaternary center creation in the intramolecular asymmetric heck reaction

The Boehringer-Ingelheim phosphinoimidazoline (BIPI) ligands were applied to the formation of chiral quaternary centers in the asymmetric Heck reaction. Several different substrates were examined in detail, using more than 70 members of this new ligand class. Hammett relationships were determined through systematic variation of the ligand electronics. All substrates showed essentially the same Hammett behavior, where enantioselectivity increased as the ligands were made more electron-deficient. Ligand optimization has led to catalysts which give the highest enantioselectivities reported to date for these difficult systems.     

Frictional dynamics of fluorine-terminated alkanethiol self-assembled monolayers

The frictional dynamics of fluorine-terminated alkanethiol (S(CH2)8CF3) self-assembled monolayers (SAMs) on gold are studied using molecular dynamics simulations. The simulations treat the interactions between two SAMs on flat surfaces. The structure and frictional behavior are investigated as a function of applied pressure (200 MPa to 1 GPa) for a shear velocity of 2 m/s and compared to methyl-terminated alkanethiol SAMs. The maximum adhesive pressure between the SAMs is 220 MPa for both end groups. In agreement with experiments on the molecular scale, the shear stress and the coefficient of friction for CF3-terminated alkanethiols are larger than for CH3-terminated alkanethiols. The main source for the difference is primarily the tighter packing of the fluorinated terminal group resulting in a higher degree of order. The molecular scale coefficient of friction is correlated with the degree of order among all the systems.     

Electrokinetic phenomena at grafted polyelectrolyte layers

During the last decades the electrokinetic theory of Smoluchowski (Z. Phys. Chem. 92 (1918) 129) was extended to be applicable for soft surfaces (grafted polyelectrolyte layers (PL), biological and artificial membranes, etc.) by either using the Debye approximation or numerical solutions. In the theory of Ohshima (Colloids Surf. A 103 (1995) 249) the nonlinearized Poisson-Boltzmann (PB) equation for thick and uniform PL is solved analytically and a general hydrodynamic equation is derived in an integral form. These advantages in the theory of Ohshima provided a base for the further development of a generalized electrokinetic theory for soft surfaces. In his theory the final equation for the electroosmotic (electrophoretic) velocity is specified for the case of the complete dissociation of ionic sites within PL. Accordingly, the equation may be used only if the difference between pK and pH is very large. However, it turned out that an analytical solution of the nonlinearized PB equation for thick PL is possible for any degree of dissociation. This was achieved using the approximation of excluded coions if the absolute value of the reduced Donnan potential is larger than 2 and due to the simplification in the case of weak dissociation, when the absolute value of the reduced Donnan potential is less than 2. Combining this generalized double layer (DL) theory for PL and the theory of Ohshima enables to obtain an analytical equation for electroosmosis for the general case of any degree of dissociation. This equation creates for the first time a theoretical base for the interpretation of electrokinetic fingerprinting (EF) for the characterization of soft surfaces.