Transamination Studies on N-(1-Alkenylthio)phthalimides and Related Compounds. Synthesis of 1-Alkenesulfenamides and 1-Alkenesulfonamides(1)

In an attempt to develop a method for the general preparation of 1-alkenesulfenamides, some N,N-bis(trimethylsilyl)-1-alkenesulfenamides (4) were converted to a number of nitrogen functionalized analogs through desilylation and acylation procedures. Mono- and dibenzoylated derivatives 5aand 6a did not undergo transamination reactions with simple amines. Transamination reactions could be achieved once compounds 4 were converted to thiophthalimides 7. The transamination products 8 are unstable to chromatography, but could be oxidized to 1-alkenesulfonamides 9 using MCPBA. Some of the sulfenamides 8 may be stable to distillation. 3-(Alkenylthioimino)phthalides 11, isomers of thiophthalimides 7, also react with amines, but the process of ring opening accompanies transamination. It was found that the transamination reactions of 11 probably involve the intermediacy of isomers 7.     

Cyclobut-2-enones from Alkynes via Dichlorocyclobut-2-enones

The [2 + 2]-cycloaddition of dichloroketene (prepared in situ from CCl₃COCl and Zn(Cu)) with three alkynes 1a–c to form 2,3-dimethyl-( 2a ), 2,3-diethyl-( 2b ) and 3-butyl-4,4-dichlorocyclobut-2-enone ( 2c ) proceeds rapidly in the absence of POCl₃. The primary products 2a–c rearrange in situ to the 2,4-dichlorocyclobut-2-enones 3a–c under the influence of ZnCL₂ produced during the reaction. ZnCl₂ converts both 2a and 3a into a 4:6 equilibrium mixture of the two; this isomerization does not occur with LiCl. The Cl-atoms of both 2a , b and 3a , b and of 2c may reductively be removed with Zn(Cu) in AcOH/pyridine to afford the alkylcyclobutenones 4a-c . Without pyridine, this reduction gives ca. 1:1 mixtures of the double-bond isomers 4 and 5 in low yields. The cyclobutenones 2c and 4c may be deuterated by CD₃COOD in the presence of pyridine. D -Atom is introduced into 2c at C(4) and at C(γ), and into 4c at C(2) and C(4). A mechanism for this deuteration is considered, which does not involve a cyclobutadienolate 7 , but rather a cyclobutenolate of type 8 . The reductions of 2 and 3 to 4 might also pass through the same type of intermediate 8 .     

Synthesis of new mono-functionalised tetrathiafulvalene derivatives by reactions of etrathiafulvalenyllithium with aldehydes and ketones: X-ray crystal structures of TTF-CMe(OH)Fc, TTF-CMe(OMe)Fc and TTF-CH(OMe)TTF (Fc = ferrocenyl)

Reactions of tetrathiafulvalenyllithium (TTF-Li) with a range of aldehydes and ketones have been explored for the first time, to provide an efficient route to mono-functionalised TTF derivatives of general formulae TTF-CH(OH)R (R = alkyl, phenyl, tetrathiafulvalenyl and ferrocenyl) and TTF-CR(OH)R′ (R = alkyl, phenyl, R′ = alkyl, phenyl, tetrathiafulvalenyl, ferrocenyl, and R-R′ = fluorenyl). Subsequent transformations involving the reactive alcohol group of some of these compounds are reported. The structures of the three title compounds have been established by single-crystal X-ray analysis.     

Homolytic displacement at carbon: XI. Intramolecular homolytic displacement as a route to cyclopentane and tetrahydrofuran derivatives from hex-5-enyl- andhex-3-oxo-5-enylcobaloximes

5-Methylhex-5-enylcobaloxime reacts with carbon tetrachloride and with fluorotrichloromethane at 80–100°C to give substantially pure 1-methyl-1-(β,β,β-trichloroethyl)- and 1-methyl-1-β-fluoro-β,β-dichloroethyl)-cyclopentane. Hex-5-enylco-baloxime also gives trichloroethylcyclopentane from carbon tetrachloride, but the yield is dependent on the concentration of carbon tetrachloride. Similar cyclisation to give trichloroethyl- or fluorodichloroethyltetrahydrofuran is observed in the reactions of hex-3-oxo-5-enylcobaloxime with carbon tetrachloride and fluorotrichloromethane. However, no cyclisation was observed in the reactions of the ester, hex-2-one-3-oxo-5-enylcobaloxime, with carbon tetrachloride. These reactions are believed to take place by attack of a polyhalogenomethyl radical at the terminal unsaturated carbon of the organic ligand, followed either by an intramolecular homolytic displacement in which the carbon radical at position-5 attacks carbon-1 with displacement of cobaloxime(II), or by a halogen atom abstraction.     

Comment: 2004's fastest organic and biomolecular chemistry!

In January 2003, the Royal Society of Chemistry launched Organic & Biomolecular Chemistry (OBC)--a journal promising to provide high quality research from all aspects of synthetic, physical and biomolecular organic chemistry. The journal was set to build upon the foundations laid down by its predecessor publications (J. Chem. Soc., Perkin Trans. 1 and J. Chem. Soc., Perkin Trans. 2) as well as complement the subject coverage already published in prestigious general chemistry journals such as Chemical Communications and Chemical Society Reviews. Nearly two years on, just how is the programme developing and what can the community expect to see from the Royal Society of Chemistry (RSC)?     

Substitution reactions of [Fe(4)S(4)Cl(4)](2-) with Bu(t)NC or Et(2)NCS(2)(-): trapping intermediates and detecting new pathways

Kinetic studies on the substitution reaction between [Fe(4)S(4)Cl(4)](2-) and Bu(t)NC or Et(2)NCS(2)(-) are reported. The binding of small molecules and ions to Fe-S clusters is a fundamental step in substitution reactions but can be difficult to follow directly because these reactions are rapid and often associated with small spectroscopic changes. A novel kinetic method is reported which allows the time course of molecule and ion binding to Fe-S clusters to be followed by monitoring the lability of the cluster. Using a stopped-flow, sequential-mix apparatus, [Fe(4)S(4)Cl(4)](2-) and L (L = Et(2)NCS(2)(-) or Bu(t)NC) are rapidly mixed, and after a known time (delta) the resulting solution is mixed with a solution of PhS(-). The thiolate substitutes for the chloro ligands on the cluster, in a reaction which is easy to follow because of the large change in the visible absorption spectrum. The rate of this substitution is extremely sensitive to whether L is bound to the cluster or not. By correlation of delta with the rate of the reaction with PhS(-), the time course of the reaction between [Fe(4)S(4)Cl(4)](2-) and L can be mapped out. In studies where L = Bu(t)NC this technique has allowed the detection of an intermediate ([Fe(4)S(4)Cl(4)(CNBu(t))](2-)) which cannot be detected spectrophotometrically. In further studies, the substitution reactions of [Fe(4)S(4)Cl(4)](2-) with PhS(-), Et(2)NCS(2)(-), or Bu(t)NC are all perturbed by the addition of Cl(-). In all cases a common pathway for substitution is evident, but with Et(2)NCS(2)(-) an additional, slower pathway becomes apparent under conditions where the common pathway is completely inhibited by Cl(-).     

Metallocycle synthesis accelerated by high pressure

Reaction of cis-[FeH₂(dmpe)₂](1) with diphenylbutadiyne results in an insertion into both of the iron-hydride bonds to form an iron metallocycle. Spectroscopic and crystallographic data of [Fe(PhHCC₂CHPh)(dmpe)₂] (3) show 1,4-diphenylbutatriene is symmetrically bound to the metal via the central double bond. The reaction to form the metallocyclic complex is greatly accelerated by application of external pressure. A 41% yield of (3) is isolated after two days at atmospheric pressure or after approximately 75 min at 800MPa.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

Charge transfer in the Cl-CO cluster induced by core ionization

Ab initio calculations of core-ionization spectra of the anion-molecule Cl-CO cluster are performed. Particular attention is paid to the investigation of charge-transfer screening processes accompanying core ionization of the CO molecule in the cluster. The charge-transfer processes are very efficient and favored by the presence of a low-lying unoccupied pi* orbital in CO capable of accepting an electron from Cl-. The O1s(-1) and C1s(-1) core-ionization spectra are calculated and compared. Both reveal a breakdown of the quasiparticle picture of core ionization caused by the charge-transfer processes. Remarkable differences between these two spectra are found which manifest themselves in distinct intensity distributions in the prominent low-energy spectral bands. The underlying reason for these differences is elucidated and linked with the preference of the pi* orbital to localize mainly on carbon. Core-ionization spectra of anion-molecule clusters are very sensitive to the type of the molecule involved as the comparative analysis of the O1s(-1) core-ionization spectra of the Cl-CO and Cl-H(2)O clusters show.