The influence of strain rate on the visibility of dislocations in transmission electron microscopy images of deformed Ti–6 wt% Al–4 wt% V and in Timet 550

Samples of Ti–6?wt%?Al–4?wt%?V and Timet 550 (Ti–4?wt%?Al–4?wt%?Mo–2?wt%?Sn–0.5?wt%?Si) have been subjected to strain rates between 10^?1 and 10³?s^?1and detailed examination of the dislocation structure in the α grains has been carried out using transmission electron microscopy (TEM). For samples deformed to a strain of 0.1 at 10^?1?s^?1, detailed analysis of the defects can be carried out using all diffracting vectors and the presence of (c +?a) dislocations and a dislocations thus confirmed. In contrast, for samples strained to the same strain of 0.1 but at 5?s^?1, it is not possible to obtain images of dislocations when using any diffracting vectors other than 0002. Thus the presence of dislocations which have a Burgers vector containing a c component can be confirmed in the samples strained at 5?s^?1 but the presence of a-component dislocations can only be inferred from TEM of these samples because of the difficulty of obtaining images with diffracting vectors other than 0002. Limited observations on samples strained at 10³?s^?1 show that similar difficulties are found in imaging dislocations as are found in samples deformed at 5?s^?1 but at this strain rate, the highest used, the difficulties are reduced since images can be obtained in some grains using diffracting vectors other than 0002. These results are discussed in terms of the nature of damage as a function of strain rate and the factors that influence contrast from dislocations in crystals.     

Feasibility Study on Quantitative Measurements of Singlet Oxygen Generation Using Singlet Oxygen Sensor Green

The purpose of this study is to investigate the feasibility for quantitative measurement of singlet oxygen (¹O₂) generation by using a newly developed ¹O₂-specific fluorescence probe Singlet Oxygen Sensor Green reagent (SOSG). ¹O₂ generation from photoirradiation of a model photosensitizer Rose Bengal (RB), in initially air-statured phosphate buffered saline (PBS) was indirectly monitored with SOSG. In the presence of ¹O₂, SOSG can react with ¹O₂ to produce SOSG endoperoxides (SOSG-EP) that emit strong green fluorescence with the maximum at 531 nm. The green fluorescence of SOSG-EP is mainly dependent on the initial concentrations of RB and SOSG, and the photoirradiation time for ¹O₂ generation. Furthermore, kinetic analysis of the RB-sensitized photooxidation of SOSG is performed that, for the first time, allows quantitative measurement of ¹O₂ generation directly from the determination of reaction rate. In addition, the obtained ¹O₂ quantum yield of porphyrin-based photosensitizer hematoporphyrin monomethyl ether (HMME) in PBS by using SOSG is in good agreement with the value that independently determined by using direct measurement of ¹O₂ luminescence. The results of this study clearly demonstrate that the quantitative measurement of ¹O₂ generation using SOSG can be achieved by determining the reaction rate with an appropriate measurement protocol.     

Wavelength-Resolved 3-Dimensional Fluorescence Lifetime Imaging

We have developed a compact system for wide-field fluorescence imaging, resolved in three spatial dimensions, lifetime and wavelength, that is based on a gated optical intensifier and an all-solid-state diode pumped Cr:LiSAF oscillator-amplifier system. Exploiting spectral separation, the system has been applied to human teeth, obtaining good lifetime contrast between enamel, dentin and caries. Exploiting spectral separation combined with depth resolution, the study of fluorescent microspheres led to an enhancement in both lifetime contrast and lateral resolution.     

Focused ion beam preparation of samples for X‐ray nanotomography

The preparation of hard material samples with the necessary size and shape is critical to successful material analysis. X‐ray nanotomography requires that samples are sufficiently thin for X‐rays to pass through the sample during rotation for tomography. One method for producing samples that fit the criteria for X‐ray nanotomography is focused ion beam/scanning electron microscopy (FIB/SEM) which uses a focused beam of ions to selectively mill around a region of interest and then utilizes a micromanipulator to remove the milled‐out sample from the bulk material and mount it on a sample holder. In this article the process for preparing X‐ray nanotomography samples in multiple shapes and sizes is discussed. Additionally, solid‐oxide fuel cell anode samples prepared through the FIB/SEM technique underwent volume‐independence studies for multiple properties such as volume fraction, average particle size, tortuosity and contiguity to observe the characteristics of FIB/SEM samples in X‐ray nanotomography.     

Abrasion-ablation model for neutron production in heavy ion collisions

In intermediate energy nucleus-nucleus collisions, neutron production at forward angles is observed to occur with a Gaussian shape that is centered near the beam energy and extends to energies well above that of the beam. This paper presents an abrasion-ablation model for making quantitative predictions of the neutron spectrum. To describe neutrons produced from the abrasion step of the reaction where the projectile and target overlap, we use the Glauber model and include effects of final-state interactions. We then use the prefragment mass distribution from abrasion with a statistical evaporation model to estimate the neutron spectrum resulting from ablation. Measurements of neutron production from Ne and Nb beams are compared with calculations, and good agreement is found.     

Doppler cooling a single Ca+ ion with a violet extended-cavity diode laser

We present a scheme for employing a violet extended-cavity diode laser in experiments with single, trapped ions. For this the grating-stabilised laser is spatially and spectrally filtered and referenced to a Fabry–Pérot cavity. We measure an upper limit to the line width by observing a 305-kHz FWHM beat note with the second harmonic of a titanium sapphire laser. The laser is subsequently used to optically cool a single ⁴⁰Ca⁺ ion close to the Doppler limit. PACS 03.67.Lx; 32.80.Pj; 42.55.Px     

High-spin structure of N\simeq Z nuclei around the A = 72 region

High-spin states have been studied in ⁷²Kr and ⁷²Br using the ⁴⁰Ca + ⁴⁰Ca and ³⁶Ar + ⁴⁰Ca reactions at 164 and 145 MeV, respectively. The properties and configurations of the high-spin bands observed have been interpreted using unpaired cranked Nilsson-Strutinsky (CNS), and for ⁷²Kr, paired cranked relativistic Hartree-Bogoliubov (CRHB) calculations. In ⁷²Kr a new band has been identified that has the properties expected for the doubly aligned S-band configuration. In ⁷²Br the previously known bands have been extended to higher spin. This has lead to a re-interpretation of the configurations.Received: 31 October 2002, Published online: 24 February 2004PACS: 21.10.Re Collective levels - 23.20.Lv transitions and level energies - 27.50. + e      

Superdeformed bands and ‘shears’ bands in 197Pb and 198Pb

Excited states in ¹⁹⁷Pb and ¹⁹⁸Pb, produced in the ¹⁸⁶W (¹⁸O,xn) reaction, were studied using the EUROGAM phase 2 γ ray spectrometer array. Two new superdeformed bands have been observed in ¹⁹⁷Pb, and the existence of a superdeformed band in ¹⁹⁸Pb has been confirmed. The increased statistics provided by the latest generation of arrays has resulted in the reordering of some of the previous known cascades of magnetic dipole transitions, with the first observation of the extremely weak E2 crossover transitions.