Construction and analytical application of a biosensor based on stearic acid-graphite powder modified with sweet potato tissue in organic solvents

A biosensor based on stearic acid-graphite powder modified with sweet potato (Ipomoea batatas (L.) Lam.) tissue as peroxidase source was constructed and applied in organic solvents. Several parameters were studied to evaluate the performance of this biosensor such as stearic acid-graphite powder and tissue composition, type and concentration of supporting electrolyte, organic solvents, water/organic solvent ratio (% v/v) and hydrogen peroxide concentration. After selection of the best conditions, the biosensor was applied for the determination of hydroquinone in cosmetic creams in methanol. At the peroxidase electrode hydroquinone is oxidized in the presence of hydrogen peroxide and the radical formed was reduced back electrochemically at -180 mV vs Ag/AgCl (3.0 mol L(-1) KCl). The reduction current obtained was proportional to the concentration of hydroquinone from 6.2 x 10(-5) to 1.5 x 10(-3) mol L(-1) (r = 0.9990) with a detection limit of 8.5 x 10(-6) mol L(-1). The recovery of hydroquinone from two samples ranged from 98.8 to 104.1% and an RSD lower than 1.0% for a solution containing 7.3 x 10(-4) mol L(-1) hydroquinone and 1.0 x 10(-3) mol L(-1) hydrogen peroxide in 0.10 mol L(-1) tetrabutylammonium bromide methanol-phosphate buffer solution (95:5% v/v) (n = 10) was obtained.     

Holo- and hemidirected lead(II) in the polymeric [Pb(4)(mu-3,4-TDTA)2(H2O)2]*4H2O complex. N,N,N',N'-tetraacetate ligands derived from o-phenylenediamines as sequestering agents for lead(II)

The coordinating ability of the ligands 3,4-toluenediamine-N,N,N',N'-tetraacetate (3,4-TDTA), o-phenylenediamine-N,N,N',N'-tetraacetate (o-PhDTA), and 4-chloro-1,2-phenylenediamine-N,N,N',N'-tetraacetate (4-Cl-o-PhDTA) (H4L acids) toward lead(II) is studied by potentiometry (25 degrees C, I = 0.5 mol x dm(-3) in NaClO4), UV-vis spectrophotometry, and 207Pb NMR spectrometry. The stability constants of the complex species formed were determined. X-ray diffraction structural analysis of the complex [Pb4(mu-3,4-TDTA)4(H2O)2]*4H2O (1) revealed that 1 has a 2-D structure. The layers are built up by the polymerization of centrosymmetric [Pb4L2(H2O)2] tetranuclear units. The neutral layers have the aromatic rings of the ligands pointing to the periphery, whereas the metallic ions are located in the central part of the layers. In compound 1, two types of six-coordinate lead(II) environments are produced. The Pb(1) is coordinated to two nitrogen atoms and four carboxylate oxygens from the ligand, whereas Pb(2) has an O6 trigonally distorted octahedral surrounding. The lead(II) ion is surrounded by five carboxylate oxygens and a water molecule. The carboxylate oxygens belong to four different ligands that are also joined to four other Pb(1) ions. The selective uptake of lead(II) was analyzed by means of chemical speciation diagrams as well as the so-called conditional or effective formation constants K(Pb)eff. The results indicate that, in competition with other ligands that are strong complexing agents for lead(II), our ligands are better sequestering agents in acidic media.     

Gamma-radiolysis of quinoline in 2-propanol solution

In the last twenty years the ionizing effects on matter of⁶⁰Co γ-rays have been widely discussed. However, regarding organic compounds, mainly aromatic ones, results are scarce, particularly those obtained in alcoholic solution. γ-Radiation is used mainly in industry and medicine, particularly for sterilization of surgical materials. In this work we studied the chemical and radiolytic stability of products by radiation from quinoline in isopropanol solution. Doses were from 2×10⁴ to 3×10⁵ Gy and the samples concentration was 1∶1 by volume. We have observed significant effects for high radiation doses. Lower doses effected the solvent with the production of long polymeric hydrocarbons. Products formed were characterized by capillary gas chromatography coupled to a mass-selective detector (GC/MSD). We have used a fused silica capillary column 25 m long, 0.2 mm in internal diameter, covered by a 0.33 μm thick film of crosslinked 5% phenyl methyl silicone.     

Flow injection spectrophotometric method for chloride determination in natural waters using Hg(SCN)(2) immobilized in epoxy resin

A flow injection (FI) spectrophotometric method was proposed for the determination of chloride ion in natural waters. The determination of chloride was carried out by reaction with Hg(SCN)₂ immobilized in an epoxy resin bead in a solid-phase reactor (SPR) and the thiocyanate ions released were determined spectrophotometrically at 480 nm after complexing reaction with Fe(III). The analytical curve for chloride was linear in the concentration range from 5.6 × 10⁻⁵ to 2.2 × 10⁻⁴ mol l⁻¹ with a detection limit of 1.4 × 10⁻⁵ mol l⁻¹. The relative standard deviation (R.S.D.) was 2.2% for a solution containing 2.2 × 10⁻⁴ mol l⁻¹ (n = 10). The simple manifold allows a routine analytical frequency of 100 determinations per hour. The main advantage of the developed method is the 400% reduction of the Hg waste solution generated when compared to conventional methods for chloride determination based on the same spectrophotometric reaction.     

Opportunities for the valorization of industrial glycerol via biotransformations

1. Download : Download high-res image (183KB)
2. Download : Download full-size image

     

Turbulence in microfluidics: Cleanroom-free,fast, solventless,and bondless fabrication and application in high throughput liquid-liquid extraction

This paper addresses an important breakthrough in the deployment of ultra-high adhesion strength microfluidic technologies to provide turbulence at harsh flow rate conditions. This paper is only, to our knowledge, the second reporting on the generation of high flow rate-assisted turbulence in microchannels. This flow solves a crucial bottleneck in microfluidics: the generation of high throughput homogeneous mixings. We focused on the fabrication of bulky polydimethylsiloxane (PDMS) microchips (without any interfaces) rather than the laborious surface modifications that were employed in the first reporting about turbulence-assisted microfluidics. The fabrication is cleanroom-free, simple, low-cost, fast, solventless, and bondless requiring only a laboratory oven. More specifically, our method relies on the shaping of a nylon scaffold, cure of PDMS with embedded nylon, and removal of this scaffold. The scaffold was obtained by manually wrapping nylon threads. The withdrawing out of the scaffold was completed in few seconds using only a plier. Such microchannels endured flow rates of up to 60.0 mL min⁻¹ with a strikingly low elastic deformation. The importance in producing turbulence into microscale channels was successfully shown in liquid-liquid extractions. The great energy dissipation rate relative to the turbulence created high throughput and efficient extractions in microfluidics for the first time. The residence time was only 0.01 s at 25.0 mL min⁻¹ (total flow rate of the immiscible phases). In addition, the partition coefficient determined in a single run was similar to that obtained by the conventional batch shake-flask method that was realized in triplicate.