Color Stabilization of Apulian Red Wines through the Sequential Inoculation of Starmerella bacillaris and Saccharomyces cerevisiae

Mixed fermentation using Starmerella bacillaris and Saccharomyces cerevisiae has gained attention in recent years due to their ability to modulate the qualitative parameters of enological interest, such as the color intensity and stability of wine. In this study, three of the most important red Apulian varieties were fermented through two pure inoculations of Saccharomyces cerevisiae strains or the sequential inoculation of Saccharomyces cerevisiae after 48 h from Starmerella bacillaris. The evolution of anthocyanin profiles and chromatic characteristics were determined in the produced wines at draining off and after 18 months of bottle aging in order to assess the impact of the different fermentation protocols on the potential color stabilization and shelf-life. The chemical composition analysis showed titratable acidity and ethanol content exhibiting marked differences among wines after fermentation and aging. The 48 h inoculation delay produced wines with higher values of color intensity and color stability. This was ascribed to the increased presence of compounds, such as stable A-type vitisins and reddish/violet ethylidene-bridge flavonol-anthocyanin adducts, in the mixed fermentation. Our results proved that the sequential fermentation of Starmerella bacillaris and Saccharomyces cerevisiae could enhance the chromatic profile as well as the stability of the red wines, thus improving their organoleptic quality.     

Anion exchange membranes derived from nafion precursor for the alkaline fuel cell

Robust hydroxide conducting membranes are required for long‐lasting, low‐cost solid alkaline fuel cells (AFCs). In this study, we synthesize Nafion‐based anion exchange membranes (AEMs) via amination of the Nafion precursor membrane with 1,4‐dimethylpiperazine. This initial reaction produces an AEM with covalently attached dimethylpiperazinium cations neutralized with fluoride anions, while a subsequent ion exchange reaction produces a hydroxide ion conducting membrane. These AEMs possess high thermal stability and different thermal transition temperatures compared to Nafion, while small‐angle X‐ray scattering reveals a similar ionic morphology. The hydroxide ion conductivity of the Nafion‐based AEM is fivefold lower than the proton conductivity of Nafion at 80 °C and 90% relative humidity. More importantly, the hydroxide conductivity is insensitive to drying and rehydrating the membrane, which is atypical of other AEMs with quaternary ammonium cations. The high chemical and thermal stability of this hydroxide conducting Nafion‐based AEM provides a promising alternative for AFCs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Amination of aryl- and vinylacetylenic compounds catalyzed by rhodium(I) complexes

New rhodium-catalyzed amination reactions of arylacetylenes and cyclohexen-1-ylacetylene in the presence of strong bases with the use of carbon dioxide as an auxiliary are described. Secondary amines attack the terminal carbon atom of the triple bond followed by protonation of the adjacent carbon atom. Alternatively, the reaction can proceed further with the addition of the second alkyne molecule. The conditions for the selective synthesis of enamines (up to 87% yield) or α-substituted propynylamines (up to 86% yield) are reported. Dipartimento di Chimica Organica e Industriale dell'Università, Viale delle Scienze, I-43100 Parma, Italia. Dipartimento di Chimica, Università della Calabria, Arcavacata di Rende, I-80036 Cosenza, Italia. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 966–970, May, 1998.     

Quantum-noise-initiated symmetry breaking of spatial solitons

The spectra of chi(2) spatial solitons are measured close to the soliton-formation threshold and show the presence of sidebands, shifted by 39 THz from the laser line. By comparing with the predictions of a quantum optical field model, solved numerically in the full (3 + 1)-dimensional space, it is claimed that the observed temporal instability of the spatial soliton is seeded by vacuum state fluctuations of the electromagnetic field.     

Importance of molecular details in predicting bacterial adhesion to hydrophobic surfaces

Electrostatic and hydrophobic forces are generally recognized as important in bacterial adhesion. Current continuum models for these forces often wrongly predict measurements of bacterial adhesion forces. The hypothesis tested here is that even qualitative guides to bacterial adhesion often require more than continuum information about hydrophobic forces; they require knowledge about molecular details of the bacteria and substrate surface. In this study, four different strains of bacteria were adsorbed to silica surfaces hydrophobized with alkylsilanes. The thickness of the lipopolysaccharide layers varied on the different bacteria, and the lengths of the alkylsilane molecules were varied from experiment to experiment. Bacterial adhesion was assessed using column experiments and atomic force microscopy (AFM) experiments. Results show that hydrophobized surfaces have higher bacterial sticking coefficients and stronger adhesion forces than bare silica surfaces, as expected. However, adhesion decreased as the solution Debye length became longer than the alkylsilane, perhaps since the silane molecules could not "reach" the bacterial surface. Similarly, those bacteria with a long o-antigen layer had decreased adhesion, perhaps since the silane molecules could not reach surface-bound proteins on the bacteria. This study reveals that macroscopic measurements such as contact angle are not able to fully describe bacterial adhesion; rather, additional details such as the molecular length are required to predict adhesion.     

Identification and assay of wild-type and modified nucleoside mixtures by turbo ionspray ionization tandem mass spectrometry

A method is presented which allows the identification and assay of a nucleoside in the presence of other analogues and homologues. The method is based on the conventional multiple reaction monitoring approach performed on the [M + H]+ ions of wild-type and modified nucleosides produced by the turbo ionspray ionization method on a triple-quadrupole mass spectrometer. The accuracy of the quantitative determination relies on the evaluation of a response factor rho, which takes into account the kinetics of dissociation of the parent ions into the protonated [B + 2H]+ nucleobase ions. The evaluation of the absolute concentration of each analyte in the examined mixture does not require any previous chromatographic separation.     

Copolymerization of 2‐hydroxyethyl methacrylate with a comonomer with spiroacetal moiety

The study reports the synthesis of a copolymer based on 2‐hydroxyethyl methacrylate and 3,9‐divinyl‐2,4,8,10‐tetraoxaspiro[5.5]undecane (U) acquired through radical polymerization in the presence of 2,2′‐azobis(2‐methylpropionitrile). The attempt was to have a solid content as high as 10 wt %. The polymerization process was conducted in the presence of a classic ionic surfactant—sodium lauryl sulfate—and comparatively using two variants of protective colloid β‐cyclodextrin and poly(aspartic acid), respectively. The prepared dispersions were characterized from the viewpoint of their hydrodynamic radius, zeta potential, and conductivity evolution during syntheses. The mean particle size and size distribution and zeta potential and conductivity were also evaluated for the synthesized polymeric particles. The compositions of the polymers were confirmed by FTIR and ¹H NMR spectra, and also, the thermal stability of the polymeric compounds was evaluated. SEM and AFM investigations of the polymer morphology are also presented. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011