Importance sampling of rare events in chaotic systems

The European Physical Journal B - A way to make financial models effective is by letting them to represent the so called “fat tails”, i.e., extreme changes in stock prices that are...     

Co-Fermentation of Cheese Whey and Crude Glycerol in EGSB Reactor as a Strategy to Enhance Continuous Hydrogen and Propionic Acid Production

This study evaluated the production of hydrogen and propionic acid in an expanded granular sludge bed (EGSB) reactor by co-fermentation of cheese whey (CW) and crude glycerol (CG). The reactor was operated at hydraulic retention time (HRT) of 8 h by changing the CW/CG ratio from 5:1 to 5:2, 5:3, 5:4, and 5:5. At the ratio of 5:5, HRT was reduced from 8 to 0.5 h. The maximum hydrogen yield of 0.120 mmol H₂ g COD^?1 was observed at the CW/CG ratio of 5:1. Increasing the CG concentration repressed hydrogen production in favor of propionic acid, with a maximum yield of 6.19 mmol HPr g COD^?1 at the CW/CG ratio of 5:3. Moreover, by reducing HRT of 8 to 0.5 h, the hydrogen production rate was increased to a maximum value of 42.5 mL H₂ h^?1 L^?1at HRT of 0.5 h. The major metabolites were propionate, 1,3-propanediol, acetate, butyrate, and lactate.     

Applicability of Microaerobic Technology to Enhance BTEX Removal from Contaminated Waters

As the addition of low concentrations of oxygen can favor the initial degradation of benzene, toluene, ethylbenzene, and xylenes (BTEX) compounds, this work verified the applicability of the microaerobic technology to enhance BTEX removal in an anaerobic bioreactor supplemented with high and low co-substrate (ethanol) concentrations. Additionally, structural alterations on the bioreactor microbiota were assessed throughout the experiment. The bioreactor was fed with a synthetic BTEX-contaminated water (~ 3 mg L^?1 of each compound) and operated at a hydraulic retention time of 48 h. The addition of low concentrations of oxygen (1.0 mL min^?1 of atmospheric air at 27 °C and 1 atm) assured high removal efficiencies (> 80%) for all compounds under microaerobic conditions. In fact, the applicability of this technology showed to be viable to enhance BTEX removal from contaminated waters, especially concerning benzene (with a 30% removal increase), which is a very recalcitrant compound under anaerobic conditions. However, high concentrations of ethanol adversely affected BTEX removal, especially benzene, under anaerobic and microaerobic conditions. Finally, although bacterial community richness decreased at low concentrations of ethanol, in general, the bioreactor microbiota could deal with the different operational conditions and preserved its functionality during the whole experiment.     

Development of a method for quantitative determination of the cytotoxic agent piplartine (piperlongumine) in multiple skin layers

This study reports the development of a simple and reproducible method, with high rates of recovery, to extract the cytotoxic agent piplartine from skin layers, and a sensitive and rapid UV‐HPLC method for its quantification. Considering the potential of piplartine for topical treatment of skin cancer, this method may find application for formulation development and pharmacokinetics studies to assess cutaneous bioavailability. Porcine skin was employed as a model for human tissue. Piplartine was extracted from the stratum corneum (SC) and remaining viable skin layers (VS) using methanol, vortex homogenization and bath sonication, and subsequently assayed by HPLC using a C₁₈ column, and 1:1 (v/v) acetonitrile–water (adjusted to pH 4.0 with acetic acid 0.1%) as mobile phase. The quantification limit of piplartine was 0.2 μg/mL (0.6 μm ), and the assay was linear up to 5 μg/mL (15.8 μm ), with within‐day and between‐days assay coefficients of variation and relative errors <15%. Piplartine recovery from SC and VS varied from 86 to 96%. The method was suitable to assay samples from skin penetration studies, enabling detection of differences in cutaneous delivery in different skin compartments resulting from treatment with various formulations and time periods.     

Elemental distribution by synchrotron X-ray microfluorescence of prostate 3D cell culture

Prostate cancer is a highly prevalent disease and ranks second among malignant neoplasms that affect men around the world, behind lung cancer alone. Trace elements are very important and are involved in many cellular processes. The X-ray microfluorescence technique is an advanced tool of high spatial resolution, sensitivity, multielemental analysis, and nondestructiveness for trace element study. This study aimed to investigate the elemental distribution in spheroids obtained through the following human prostate cell lines using synchrotron X-ray microfluorescence: tumor cell line androgen independent (DU145), tumor cell line androgen dependent (LNCaP), and normal cell line (RWPE-1). The measurements were performed with a standard geometry of 45° of incidence, excited by a white beam using a pixel of 25 μm and an acquisition time of 300 ms/pixel at the X-ray fluorescence beamline at the Synchrotron Light National Laboratory (Campinas, Brazil). The synchrotron X-ray microfluorescence results showed differences between groups in all elements analyzed and suggested that further studies should be performed to understand the relationship of these trace elements with the progression and development of the disease.     

An improved mixed numerical-experimental method for stress field calculation

In this work a numerical-experimental method is used to study the dynamic behavior of an aluminum plate subjected to a small mass impact. The out-of-plane displacements, due to transient bending wave propagation, were assessed for successive time instants, using double pulse TV-holography, also known as pulsed ESPI. The experimental setup and the image processing methods were improved to allow the calculation of the plate transient stress field. Integral transforms are used to obtain the strain fields from spatial derivatives of displacements noisy data. A numerical simulation of the plate transient response was carried out with FEM Ansys^®. For this purpose a PZT transducer was used to record the impact force history, which was inputted in the numerical model. Finally, the comparisons between numerical and experimental results are presented in order to validate the present methodology.     

Solar neutrinos: probing the quasi-isothermal solar core produced by supersymmetric dark matter particles

SNO measurements strongly constrain the central temperature of the Sun, to within a precision of much less than 1%. This result can be used to probe the parameter space of supersymmetric dark matter. In this first analysis we find a lower limit for the weakly interacting massive particle (WIMP) mass of 60 GeV. Furthermore, in the event that WIMPs create a quasi-isothermal core, they will produce a peculiar distribution of the solar neutrino fluxes measured on Earth. Typically, a WIMP with a mass of 100 GeV and annihilation cross section of 10(-34) cm(3)/sec will decrease the neutrino predictions, by up to 4% for the Cl, by 3% for the heavy water, and by 1% for the Ga detectors.     

Scale size of magnetic turbulence in tokamaks probed with 30-MeV electrons

Measurements of synchrotron radiation emitted by 30-MeV runaway electrons in the TEXTOR-94 tokamak show that the runaway population decays after switching on neutral beam injection (NBI). The decay starts only with a significant delay, which decreases with increasing NBI heating power. This delay provides direct evidence of the energy dependence of runaway confinement, which is expected if magnetic modes govern the loss of runaways. Application of the theory by Mynick and Strachan [Phys. Fluids 24, 695 (1981)] yields estimates for the "mode width" (delta) of magnetic perturbations: delta<0.5 cm in Ohmic discharges, increasing to delta = 4.4 cm for 0. 6 MW NBI.     

Spectral editing of 13C cp/MAS NMR spectra of complex systems: application to the structural characterisation of cork cell walls

A mathematical method of obtaining 13C CP/MAS subspectra of single components of a complex system is presented and applied to three- and four-component systems. The method is based on previously reported work that exploits different proton relaxation properties for different domains of an heterogeneous system. However, unlike the original method that obtained subspectra through a trial-and-error approach, the method here presented solves the problem mathematically, thus avoiding the time-consuming and non-rigorous trial-and-error step. The method is applied to mixtures of three and four polymers and to a more complex system: cork cell walls. As expected, as the number of components increases, the sharing of relaxation properties between different components is increasingly probable, either due to incidental coincidence of relaxation times or to specific interactions and intimate mixing of compounds. While this hinders the calculation of the subspectra of single chemical components, it may provide useful information about inter-component interactions. This possibility was demonstrated by the application of this method to cork cell walls. Both three-component and four-component approaches showed that three domains exist in cork cell walls: carbohydrate/lignin matrix, mobile suberin close to (probably bonded to) lignin groups (about 42% w/w) and hindered suberin close to (probably bonded to) carbohydrate-OCH2O groups (about 4% w/w).     

Activity Coefficients of Potassium Chloride in Water–Ethanol Mixtures

Activity coefficients of KCl were determined in water–ethanol solvents in the range 5–20% (w/w) ethanol, from experimental electromotive force (emf) data. The molalities varied from 0.1 mol-kg^–1 to near saturation and measurements were taken in the temperature range 25 to 45°C. The Pitzer model was used to describe the nonideal behavior of the electrolyte and the corresponding coefficients were determined for each solvent. The Pitzer–Simonson equations were also applied and found superior in the study of KCl in those nonaqueous solutions.