Intrinsic information content of NMR dipolar couplings: a conformational investigation of 1,3-butadiene in a nematic phase.

The conformational equilibrium of 1,3-butadiene in a condensed fluid phase is investigated by liquid-crystal NMR spectroscopy. The full set of D(HH) and D(CH) dipolar couplings is determined from the analysis of the (1)H spectra of the three 1,3-butadiene most-abundant isotopomers (i.e. the all (12)C and the two single-labeled (13)C isotopomers) for a total of 21 independent dipolar couplings. A very good starting set of spectral parameters for the analysis of the (1)H spectrum is determined in a semiautomated way by the analysis of the (N-1) (specifically, N=6, the number of 1/2 spin nuclei in the spin system) quantum refocused (5QR), and not (5Q), spectra. As an alternative approach, a Monte Carlo (MC) numerical simulation, capable of predicting the solute ordering, is tested to simulate the 5QR spectrum. The set of D(ij) couplings is very good, proving that the MC method can represent a novel, valid alternative to the existing spectral simplification procedures. The experimentally determined dipolar-coupling data set is fully compatible with the 1,3-butadiene conformational distribution reported in the literature for isolated molecules, indicating the presence of about 99 % of s-trans conformer. With regards to the remaining 1 %, in spite of the direct and very strong dependence of the observables on the molecular structure, it was not possible to discriminate between the planar s-cis and s-gauche forms, both of which produce a very good fit of the dipolar couplings. Vibrational corrections, up to the anharmonic term, were applied; the calculated geometrical parameters are in good- although not exact-agreement with those reported in the literature from experimental and theoretical investigations. This result can be considered as supporting the methodology used for obtaining the structure and conformational distribution of a flexible molecule in a liquid phase.     

Direct determination of ephedrine intermediate in a biotransformation reaction using infrared spectroscopy and PLS

Fourier transform mid-infrared spectroscopy (FT-MIR) coupled with a homemade attenuated total reflectance (ATR) flow-cell was used for on-line monitoring of a biotransformation reaction. The reaction was also monitored off-line by gas chromatography-mass spectrometry (GC-MS) enabling to establish a multivariate model for the infrared data based on partial least squares (PLS) regression. The method developed allowed the simultaneous determination of the substrate, two intermediates and the final product involved in the reduction reaction of 1-phenyl 1,2-propanedione at an initial concentration of 0.5% (v/v). The reaction was accomplished with a whole-cell suspension of Saccharomyces cerevisiae in a phosphate buffer of pH 3.0 at 32+/-1 degrees C. The ATR infrared monitoring was performed directly on the suspension cell without any separation process or extraction over 3h, totaling 188 spectra. The data were split into two subsets, with 158 times for calibration and 30 times for validation. The results showed that the proposed method may be used for on-line monitoring of the biotransformation reactions when the initial concentration is very low.     

Core–Shell Crystals of Porous Organic Cages

The first examples of core–shell porous molecular crystals are described. The physical properties of the core–shell crystals, such as surface hydrophobicity, CO₂ /CH₄ selectivity, are controlled by the chemical composition of the shell. This shows that porous core–shell molecular crystals can exhibit synergistic properties that out‐perform materials built from the individual, constituent molecules.     

[RhIII(dmbpy)2Cl2]+ as a Highly Efficient Catalyst for Visible‐Light‐Driven Hydrogen Production in Pure Water: Comparison with Other Rhodium Catalysts

We report a very efficient homogeneous system for the visible‐light‐driven hydrogen production in pure aqueous solution at room temperature. This comprises [Rh^III(dmbpy)₂Cl₂]Cl ( 1 ) as catalyst, [Ru(bpy)₃]Cl₂ ( PS1 ) as photosensitizer, and ascorbate as sacrificial electron donor. Comparative studies in aqueous solutions also performed with other known rhodium catalysts, or with an iridium photosensitizer, show that 1) the PS1 / 1 /ascorbate/ascorbic acid system is by far the most active rhodium‐based homogeneous photocatalytic system for hydrogen production in a purely aqueous medium when compared to the previously reported rhodium catalysts, Na₃[Rh^I(dpm)₃Cl] and [Rh^III(bpy)Cp*(H₂O)]SO₄ and 2) the system is less efficient when [Ir^III(ppy)₂(bpy)]Cl ( PS2 ) is used as photosensitizer. Because catalyst 1 is the most efficient rhodium‐based H₂‐evolving catalyst in water, the performance limits of this complex were further investigated by varying the PS1 / 1 ratio at pH 4.0. Under optimal conditions, the system gives up to 1010 turnovers versus the catalyst with an initial turnover frequency as high as 857 TON h^?1. Nanosecond transient absorption spectroscopy measurements show that the initial step of the photocatalytic H₂‐evolution mechanism is a reductive quenching of the PS1 excited state by ascorbate, leading to the reduced form of PS1 , which is then able to reduce [Rh^III(dmbpy)₂Cl₂]⁺ to [Rh^I(dmbpy)₂]⁺. This reduced species can react with protons to yield the hydride [Rh^III(H)(dmbpy)₂(H₂O)]²⁺, which is the key intermediate for the H₂ production.     

Pyrrolizidine alkaloids from Solenanthus lanatus DC. with acetylcholinesterase inhibitory activity

The whole plant ethanolic extract of Solenanthus lanatus was used for the isolation of acetylcholinesterase inhibitors. A new pyrrolizidine alkaloid, 7-O-angeloylechinatine N-oxide, 1, was isolated together with three known compounds of the same class (3′-O-acetylheliosupine N-oxide, 2, heliosupine N-oxide, 3, and heliosupine, 4), by bioassay-guided approach. Their structures were elucidated by spectroscopic methods. All the isolated compounds showed inhibition activity against the AChE, with IC₅₀ 0.53–0.60 mM.     

An Experimental and Theoretical Investigation on Pentacoordinated Cobalt(III) Complexes with an Intermediate S=1 Spin State: How Halide Ligands Affect their Magnetic Anisotropy

Understanding the factors that control the magnitude and symmetry of magnetic anisotropy should facilitate the rational design of mononuclear metal complexes in the quest for single‐molecule magnets (SMMs), based on a single metal ion, with high blocking temperatures and large energy barriers. The best strategy is to define magnetostructural correlations through the investigation of a series of metal complexes. It has been demonstrated that the main contribution to the magnetic anisotropy arises from the spin‐orbit coupling (SOC) effect in metal‐ion‐based systems, so current studies focus particularly on the use of both ligands and metal ions possessing a large SOC. In this context, we report a unique series of halide Co^III complexes, [CoL(X)], with X=Cl, Br, I ( CoX ) and L=2,2′‐(2,2′‐bipyridine‐6,6′‐diyl)bis(1,1‐diphenylethanethiolate), which possess a rare intermediate S=1 spin ground state. The S=1 Co^III complexes are attractive species because they possess a remarkably large axial zero‐field splitting (defined by D from the following Hamiltonian: H =DS_z²), as well as the halide ligands inducing large SOC constants. The single‐crystal X‐ray structures reveal that the CoBr and CoI complexes are isostructural with the previously described CoCl complex. Their coordination sphere displays a distorted pentacoordinated square pyramidal geometry, with the halide located in the Co^III axial position. Large positive D values of 35, 26, and 18 cm^?1 are found for CoCl , CoBr , and CoI , respectively, through analysis of the magnetic susceptibility data as a function of temperature. To rationalize this trend, theoretical calculations based on both density functional theory (DFT) and complete active space self‐consistent field (CASSCF) methods are performed successfully. Both the sign and magnitude of D are predicted remarkably well by these theoretical approaches. The DFT calculations also show that the resulting D values originate from a balance of several contributions, and that many factors, including differences in their structural properties and in the contribution of the halide, should be taken into account to explain the trend of D in this series of complexes.     

Promiscuous catalysis by the tetrahymena group I ribozyme

Catalytic promiscuity, the ability of an enzyme to catalyze alternative reactions, has been suggested to have played an important role in the evolution of new catalytic activities in protein enzymes. Similarly, promiscuous activities may have been advantageous in an earlier RNA world. The Tetrahymena Group I ribozyme naturally catalyzes the site-specific guanosine attack on an anionic phosphate diester and has been shown to also catalyze aminoacyl transfer to water, albeit with a small rate acceleration (<10-fold). This inefficient catalysis could be due to the differences in charge and/or geometry requirements for the two reactions. Herein, we describe a new promiscuous activity of this ribozyme, the site-specific guanosine attack on a neutral phosphonate diester. This alternative substrate lacks the negative charge at the reaction center but, in contrast to the aminoacyl substrate, can undergo nucleophilic attack with the same geometry as the natural substrate. Our results show that the neutral phosphonate reaction is catalyzed about 1 x 106-fold, substantially better than the acyl transfer but far below the normal anionic substrate. We conclude that both charge and geometry are important factors for catalysis of the normal reaction and that promiscuous catalytic activities of ribozymes could have been created or enhanced by reorienting and swapping RNA domains.     

Thermal convection and related instabilities in models of crystal growth from the melt on earth and in microgravity: Past history and current status

The paper presents a comparative study of a number of theoretical/experimental/numerical results concerning the dynamics of natural (gravitational), Marangoni and related mixed convection in various geometrical models of widely‐used technologies for the production of single‐crystalline materials (Horizontal and vertical Bridgman growth, Czochralski method, Floating Zone Technique). Emphasis is given to fundamental knowledge provided over the years by landmark analyses as well as to very recent contributions. Such a knowledge is of paramount importance since it is validating new, more complex models, accelerating the current trend towards predictable and reproducible phenomena and finally providing an adequate scientific foundation to industrial processes which are still conducted on a largely empirical basis. A deductive approach is followed with fluid‐dynamic systems of growing complexity being treated as the discussion progresses. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Effect of Multiple Buckling Modes on the Postbuckling Behavior of Plane Elastic Frames. Part II. Asymmetric Frames

The postbuckling behavior of an asymmetric one-bay, two-storey frame with clamped edges is analyzed. Columns have different bending stiffnesses and are pairwise of the same length. By assuming columns to be inextensible and shear undeformable, and beams to be rigid, two buckling modes are possible which are described by the sidesway of the lower floor with a rigid horizontal displacement of the upper floor and a sidesway of the upper floor, the lower floor undergoing no displacement. By properly selecting the ratios EI/h² (EI being the bending stiffness of a column and h its length) the two buckling modes may occur simultaneously. A third buckling mode is also possible which is characterized by no displacement of the horizontal beams and local deflection of one or more columns in the shape of a beam with fixed edges. This third case will not be considered in this paper. The Koiter general nonlinear theory of elastic stability recast in a form convenient for the development of finite elment models along lines similar to the recent presentation by Budiansky has been employed in the analysis. Nonlinear constraints on the field variable φ (φ being the cross-section rotation) are accounted for by means of Lagrangian multipliers. Results show that the postbuckling behavior of a single buckling mode is always asymmetric unstable and depends both on the degree of asymmetry of the structure and on the ratio h/l, l being the frame span. The occurrence of simultaneous buckling modes exacerbates the imperfection sensitivity of the structure.