Synthesis and characterization of oligosalicylaldehyde-based epoxy resins

The synthesis of a new epoxy resin of oligosalicylaldehyde by the reaction with epichlorohydrin is reported. New resin’s epoxy value and chlorine content were determined and found to be 25% and 1%, respectively. The characterization of the new resin was instrumented by FTIR, ¹H NMR, scanning electron microscopy, and thermal gravimetric analyses. TGA results showed that the cured epoxy resin has a good resistance to thermal decomposition. The mass losses of cured epoxy resin were found to be 5%, 10%, 50% at 175°C, 240°C, and 400°C, respectively. On the curing procedure the resin was cured with polyethylenepolyamine at 25 °C for 8 h and 100°C for 1.5 h. The FTIR spectrum of new epoxy resin gave the peak of oxirane ring at ṽ = 918 cm⁻¹. In memory of Professor Dr. Adalet R. Vilayetoğlu     

Thermal analysis of pharmaceutical compounds

Some sulphonamides are evaluated by means of thermal analysis. Use is made of their characteristic endothermic DTA peaks (melting peaks), where the area changes linearly with variations in the amount of sulphonamides. The method is suitable for the determination of 30–100 mg of sulphathiazole, sulphisomidine, sulphaguanidine, sulphacetamide sodium and sulphamethoxypyridazine with reasonable accuracy. As for sulphisoxazole, two peaks are used for its determination: an endothermic one to determine 30–100 mg, and an exothermic one to determine 6–30 mg.

---

Zusammenfassung Einige Sulphonamide wurden durch thermische Analyse bestimmt, wobei von der linearen Abhängigkeit der Fläche der charakteristischen endothermen DTA-Peaks (Schmelzpeaks) von der Menge der Sulphonamide Gebrauch gemacht wurde. Mit der Methode können 30–100 mg Sulphathiazol, Sulphisoimidin, Sulphaguanidin, Natrium-Sulphacetamid und Sulphamethoxypyridazin mit ausreichender Genauigkeit bestimmt werden. Bei der Bestimmung von Sulphisooxazol wurde ein endothermer Peak für Mengen von 30–100 mg und ein exothermer für geringere Mengen von 6–30 mg herangezogen.

---

. - ( ), . 30–100 , , , . , — 30 100 , — 6 30 .

     

Reversed-phase high-performance thin-layer chromatography of hematoporphyrin and its nickel,copper and zinc complexes

Summary The thin-layer chromatographic mobility of hematoporphyrin IX (Hp) and its metal complexes on octyl (C₈)- or octadecyl (C₁₈)-bonded silica gel plate is described. The mobility order for those compounds is regular on both kinds of plate with various compositions of methanol-phosphate buffer mixtures as the developing solvents; thus, Cu-complex < Ni-complex < Hp (free acid) < Zn-complex. The combination of a C₁₈-plate with an 85∶15 (vol/vol) mixture of methanol and phosphate buffer (pH 3) is recommended for the successful separation of these four compounds.     

Comparative studies on the adsorption and association of 3-methylxanthine and 7-methylxanthine at a charged interface

Summary A systematic comparative study of the adsorption and association of 3-methylxanthine (3MXan) and 7-methylxanthine (7MXan) at mercury-solution interfaces in acidic, neutral, and alkaline buffer solutions was undertaken by ac voltammetry. At bulk concentrations of3MXan above a threshold value, the stacking interactions between vertically oriented molecules lead to a slow reorientation aroundE _ecm, and the molecules adopt a perpendicular orientation. The association of the adsorbed molecules of7MXan is hindered and is not effective in promoting base-base stacking interactions. The enhanced surface activity of3MXan compared to7MXan results from the different position of the methyl group in the purine moiety. The effect of some divalent metal ions on adsorption stages and association of the investigated compounds has been studied. The results indicate that the complexation of methylated xanthine enhances the stacking interactions and hence would be expected to facilitate the formation of perpendicularly stacked layers ofM(II)-MXan complexes on the electrode surface. The adsorption parameters of the investigated compounds have been computed in absence and presence of Cu(II) at differentpH values. The results are compared with the behaviour of xanthine.

---

Vergleichende Untersuchungen zur Adsorption und Assoziation von 3-Methylxanthin und 7-Methylxanthin an einer geladenen Grenzfläche

Zusammenfassung Eine systematische vergleichende Untersuchung zur Adsorption und Assoziation von 3-Methylxanthin (3MXan) und 7-Methylxanthin (7MXan) an Quecksilber-Lösungs-Grenzflächen wurde mittels AC-Voltammetrie in sauren, neutralen und basischen Pufferlösungen durchgeführt. Oberhalb einer bestimmten Grenzkonzentration kommt es durch Wechselwirkungen zwischen vertikal angeordneten3MXan-Molekülen zu einer langsamen Reorientierung umE _ecm, was zu einer senkrechten Anordnung führt. Die Assoziation von7MXan ist gehindert und erlaubt daher keine ausgeprägten Basen-Basen-Wechselwirkungen. Die erhöhte Oberflächenaktivität von3MXan gegenüber7MXan resultiert aus der unterschiedlichen Stellung der Methylgruppe am Purinrest. Der Effekt einiger zweiwertiger Metallionen auf die Adsorption und Assoziation von3MXan und7MXan wurde untersucht. Die Ergebnisse weisen auf eine Begünstigung der Wechselwirkungen hin; die Bildung von vertikal angeordneten Grenzschichten an der Elektrodenoberfläche sollte daher im Fall vonM(II)-Mxan-Komplexen erleichtert sein. Die Adsorptionsparameter der untersuchten Verbindungen wurden in Abwesenheit und in Gegenwart von Cu(II) bei verschiedenenpH-Werten berechnet. Die Ergebnisse werden mit dem Verhalten von Xanthin verglichen.

     

Determination of V(V), Nb(V) and Ta(V) as their 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol chelates by reversed-phase HPLC

This paper reports the separation and determination of V(V), Nb(V) and Ta(V) by RP-HPLC using 5-Br-PADAP as a precolumn derivatizing reagent. On C(18) column, the three metal chelates can be separated on a baseline in 9 min with the mobile phase of methanol-water (59:41, v/v) containing tartaric acid (0.2%) and acetate buffer (pH 3.5, 10 mM). The detection limits of V(V), Nb(V) and Ta(V) are 0.13 ppb, 0.22 ppb and 1.79 ppb, respectively when S/N is 3. This method is simple and rapid, and has been used in mineral analysis with satisfactory results.     

Determination of hopane biomarkers in Arabian crude oils by gas chromatography-tandem mass spectrometry

Gas chromatography-mass spectrometry with the mass spectrometer operated in the tandem mode at a constant accelerating voltage was used to analyse for triterpanes in Arabian crude oils. Specific molecular parent-daughter ion pairs were selected for quantitative measurements owing to their metastable transitions in the first field-free region. More accurate relative distribution ratios of hydrocarbon biomarkers were determined by this sequential gating technique than by the conventional diagnostic daughter ion mass fragmentogram in common GC-MS. The data and spectra obtained from MS-MS operation may serve as unique “fingerprints” for these regional crudes     

The cyclodextrin-quinone inclusion compounds in an aqueous solution at 77. K. I. 9,10-anthraquinone sulfonates and 1,4-naphthoquinones

The complex formation between cyclodextrins (-, -, -CD's and dimethyl-\-CD) and quinones (three 9, 10-anthraquinone sulphonates and two 1,4-naphthoquinones) in the water-ethylene glycol 1:1 mixture solution at 77 K was investigated using the n^* phosphorescence spectra and their excitation spectra and lifetimes of the quinones. It was concluded on the basis of the experimental results that the complexes have various structures according to the CD-quinone combination used. Vitamin K₃ was found to form the photodimer very efficiently in the presence of -CD. The assumed CD:quinone ratios of the complexes are given.     

N-alkoxy-pyridinium and N-alkoxy-quinolinium salts as initiators for cationic photopolymerizations

The polymerization of n-butyl vinyl ether (BVE), cyclohexene oxide (CHO) and 3,4-epoxycyclohexyl(methyl)-3′,4′-epoxycyclohexane carboxylate (EEC) was initiated upon UV irradiation (λ_inc > 300 nm) of dichloromethane solutions containing N-ethoxy-2-methylpyridinium ( V ), N-ethoxy-4-phenyl-pyridinium ( VI ) or N-ethoxy-isoquinolinium hexafluorophosphate ( VII ). Whereas the bifunctional EEC was converted into an insoluble gel, BVE and CHO formed polymers of molar mass: M_w = 2 X 10⁴?2 X 10⁵ (PCHO) and M_w ≈ 2 X 10⁴ (PBVE). Protons are formed with a rather high quantum yield [ø(H+) = 0.48 on irradiating VII in dichloromethane; titration with sodium p-nitrophenolate] and it is, therefore, assumed that the polymerization is initiated by photochemically generated protons. © 1992 John Wiley & Sons, Inc.     

Enhancement of phosphoprotein analysis using a fluorescent affinity tag and mass spectrometry

A fluorescent affinity tag (FAT) was synthesized and was utilized to selectively modify phosphorylated serine and threonine residues via beta-elimination and Michael addition chemistries in a 'one-step' reaction. This labeling technique was used for covalent modification of both phosphoproteins and phosphopeptides, allowing identification of these molecular species by fluorescence imaging after solution- or gel-based separation methods. In addition to the strong fluorescence of the rhodamine tag, a commercially available antibody can be used to enrich low-abundance post-labeled phosphopeptides present in complex mixtures. Application of this methodology to phosphorylation-site mapping has been evaluated for a phosphoprotein standard, bovine beta-casein. Initial results demonstrated low femtomole detection limits after fluorescence image analysis of FAT-labeled proteins or peptides.     

Coupling of a Rydberg electron capture ion source with a quadrupole mass filter

The coupling of a Rydberg electron capture ion source with a Nermag R10-10H quadrupole mass filter is described. Details are given of the addition to this instrument of a creation cell for atoms excited in Rydberg states. Within the Nermag ion source, such atoms allow attachment of electrons of well-defined thermal energy. SF(6) was used for optimization of the main experimental parameters (gas pressures and voltages applied to the electrodes). The procedure by which Rydberg electron attachment was confirmed is described. A polychlorobiphenyl compound was used to illustrate the performance of this ionization technique. Ion formation was observed in the absence of fragmentation.