互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Gas-chromatographic determination of ultramicro amounts of selenium in pure sulphuric acid

Ultramicro amounts of selenium in pure sulphuric acid are converted into selenous acid with a bromine-bromide redox buffer solution. The selenous acid reacts quantitatively with 4-nitro-o-phenyl-enediamine to form 5-nitropiaselenol which can be extracted into toluene. The extract is very sensitive to electron-capture detection in gas chromatography, and the sensitivity is higher than that of 5-chloro-or 4, 5-dichloro-piaselenol. The calibration curve (peak heights) is linear up to 0.15 mug of selenium in 1 ml of toluene. Pure sulphuric acid, commercially available, contains 10(-6)$ 10(-5) % selenium.     

Studies on antimony oxides: Part I

Thermogravimetry (TG), differential thermal analysis (DTA) and X-ray diffraction studies of antimony(III) oxide, (Sb₂O₃), in air, nitrogen and argon atmospheres have been made. In air Sb₂O₃ becomes oxidized to Sb₂O₄ above 510°. The oxidation reaction proceeds in two stages as revealed by the TG and DTA curves. The behaviour of Sb₂O₃ is similar in both N₂ and Ar. Sb₂O₃ remains unaffected up to 430°, above which there is a slow, and continuous mass loss up to 550°. Above 550° Sb₂O₃ volatilizes resulting in an enormous weight loss. X-ray studies of the sublimate and the residue indicate the former to be the cubic form of Sb₂O₃ (Senarmontite) while the residue is the orthorhombic (Valentinite) structure. From the DTA curves in air, N₂ and Ar, the transition temperature for the cubic to the orthorhombic modification has been estimated to be around 610°.     

Luminarin 9: A new fluorescent reagent for the precolumn derivatizatioin of main volatile and non-volatile N-nitrosamines in RP-HPLC

Summary A sensitive precolumn fluorescence derivatization method for low level detection of the, volatile (N-nitrosodimethylamine and N-nitrosopyrrolidine) and non-volatile N-nitrosamines (N-nitrosoproline and N-nitrosodiethanolamine) an high-performance liquid chromatography was developed. This method is based on the denitrosation of the compounds of interest by a mixture of hydrobromic acid and acetic acid to produce the corresponding secondary amines. These are, then, able to react with, a quinolizinocoumarin derivative (luminarin 9^®) to form highly fluorescent labelled N-nitrosamine derivatives. The structural elucidation of the luminarin 9^® derivatives of N-nitrosoproline and N-nitrosodimethylamine by way of example, were established by liquid chromatography-mass spectrometry (LC-MS) and by direct chemical ionization-mass spectrometry (CI-MS). The separation, derivatization and detection conditioins were optimized for all the studied compounds. The detection limits (signal to noise ratio=3) were between 0.4 and 1.0 pmol injected depending on the compound. The calibration graphs were linear for derivatized amounts in the range of 0.5–40 nmol for N-nitrosodimethylamine and N-nitrosopyrrolidine, 0.4–2- nmol for N-nitrosoproline and 1.0–40 nmol for N-nitrosodiethanolamine. The repeatability (RSD less than 3.5%, n=6) and reproducibility (RSD less than 4.8%, n-6) were satisfactory.     

Chloryl nitrate: a novel product of the OClO + NO3 + M recombination

The products of the reaction of OClO with NO3 were investigated between 220 and 298 K using a flow reactor and infrared, visible, and ultraviolet analysis. At temperatures below 250 K new infrared and ultraviolet absorption features were observed and assigned to the novel compound chloryl nitrate (O2ClONO2). Additionally, ClO and NO2 were observed as reaction products, indicating the existence of a second reaction channel. O2ClONO2 formation predominates at temperatures below 230 K. The reaction rate constant at 220 K is estimated to be on the order of 10(-14) cm3 molecule-1 s-1 in 1-5 Torr of helium. These observations suggest that O2ClONO2 may exist in the terrestrial stratosphere.     

Mechanism of antioxidative activity of fluvastatin-determination of the active position

In order to clarify the mechanism of action for the antioxidative activity of fluvastatin sodium (FLV, (+/-)-sodium (3RS, 5RS, 6E)-7-[3-(4-fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-3, 5-dihydroxy-6-heptanoate) and its derivatives, reaction of the corresponding methyl ester of FLV with di-tert-butyl diperoxyoxalate was examined, and the corresponding keto derivative was isolated from the reaction mixture. On the basis of this result, it was concluded that the active site is the allylic carbon conjugated with the indole ring.     

Grafting of phosphonate groups on the silica surface for the elaboration of ion-sensitive field-effect transistors

Ion-sensitive field-effect transistors (ISFETs) sensitive to Ca(2+) ions could be elaborated by means of a new grafting process of the phosphonate group at the surface of the silica gate of FETs. A grafting process involving only one chemical reaction step at the surface afforded a significant improvement of the ISFET properties. The sensitivity of the ISFET towards Ca(2+) ions at pH 10 was quasi-linear in the concentration range from 10(-1) to 10(-3) M, and the slope was 10 mV pCa(-1). The site-binding model works well in predicting the experimental data, giving the complexation constant of 10(2.7) and a low value of the grafting density. The origin of the poor response of ISFETs sensitized by means of a multistep grafting process was investigated on silica powders of high specific area: the cleavage of the organic grafts at the SiOSi bonds occurring at each step could be disclosed by means of elemental analyses, infrared, and cross-polarization and magic angle spinning nuclear magnetic resonance of the grafts.     

Electronic and molecular properties of an adsorbed protein monolayer probed by two-color sum-frequency generation spectroscopy

Two-color sum-frequency generation spectroscopy (2C-SFG) is used to probe the molecular and electronic properties of an adsorbed layer of the green fluorescent protein mutant 2 (GFPmut2) on a platinum (111) substrate. First, the spectroscopic measurements, performed under different polarization combinations, and atomic force microscopy (AFM) show that the GFPmut2 proteins form a fairly ordered monolayer on the platinum surface. Next, the nonlinear spectroscopic data provide evidence of particular coupling phenomena between the GFPmut2 vibrational and electronic properties. This is revealed by the occurrence of two doubly resonant sum-frequency generation processes for molecules having both their Raman and infrared transition moments in a direction perpendicular to the sample plane. Finally, our 2C-SFG analysis reveals two electronic transitions corresponding to the absorption and fluorescence energy levels which are related to two different GFPmut2 conformations: the B (anionic) and I forms, respectively. Their observation and wavelength positions attest the keeping of the GFPmut2 electronic properties upon adsorption on the metallic surface.     

Optimization of simulated moving bed plants with low efficient stationary phases: separation of fructose and glucose

An optimization procedure for simulated moving bed (SMB) plants with low efficient stationary phases is presented. The new aspect is that the desorbent consumption can be cut by 70% by running the plant with lower internal liquid flows and a corresponding larger switch time while the productivity is kept constant. This concept was validated by the separation of fructose and glucose in water on a calcium resin with an eight-column SMB plant. The separation can be predicted well by a true moving bed (TMB) and a simulated moving bed simulation. Adsorption isotherms were determined up to 300 kg/m3 for glucose and 500 kg/m3 for fructose from 25 to 80 degrees C. Experimental SMB runs were performed over a wide range of feed concentrations (10-350 kg/m3) and temperatures (25-80 degrees C). The strong influence of the delay volume is pointed out. For an experimental run with high feed concentration a complete set of data is presented. To reduce biological growth separation at 80 degrees C is recommended.     

Practical asymmetric synthesis of (S)-MA20565, a wide-spectrum agricultural fungicide

A practical asymmetric synthesis of a wide-spectrum agricultural fungicide, (S)-MA20565 (1), is described. The convergent synthesis was achieved starting from commercially available 3-(trifluoromethyl)aniline (7) in 44% overall yield through five steps and 2-bromobenzaldehyde (9) in 48% overall yield through four steps, respectively. (S)-O-[1-(3-Trifluoromethylphenyl)ethyl]hydroxylamine (2), a key intermediate of 1, was prepared via ruthenium(II)-catalyzed asymmetric transfer hydrogenation of 1-(3-trifluoromethylphenyl)ethanone (6) followed by chlorination using methanesulfonyl chloride and oxyamination using potassium acetohydroxamate with high level of stereocontrol.