基于ARM处理器的运动目标检测与跟踪系统

运动目标的检测及跟踪技术广泛应用于军事与民用领域。传统基于PC的目标跟踪系统不能满足对体积、功耗及便携性的需求,基于ARM处理器S3C2440A和嵌入式Linux操作系统构建了一个比较完整、实用的目标跟踪系统。该系统利用摄像头采集运动目标图像,处理器进行数字图像处理,LCD显示跟踪目标。阐述了实现原理及图像获取、目标检测、图像分割和目标跟踪算法程序流程。通过实际测试,该系统能满足对低速运动目标的检测、识别和跟踪,且具有较好的实时性和稳定性。     

Irradiation Test of FPGA for BES-Ⅲ

The irradiation effect of FPGA, applied in Front-end Electronics for experiments of High-Energy Physics, is a serious problem. The performance of FPGA, used in the front-end card of Muon Counters of BES-III project, needs to be evaluated under irradiation. SEUs on Altera ACEX 1K FPGA, observed in the experiment under the irradiation of γ ray, 14 and 2.5MeV neutrons, was investigated. We calculated involved cross-section and provided reasonable analysis and evaluation for the result of the experiment. The conclusion about feasibility of applying ACEX 1K FPGA in the front-end card of the readout system of Muon Counters for BES-III was given.     

Ultrafast Saturable Absorption of Core/Shell Colloidal Quantum Dots

Ultrafast saturable absorption (SA) materials that are capable of blocking the optical absorption under strong excitation have extensive applications in photonic devices. This work presents core/shell colloidal quantum dots (CQDs) which have the quantized energy levels, excellent band gap tunability, and possess significant SA performance. When the band gap is close to the pump pulse energy, the CQDs show significant resonant SA response. At the same excitation conditions, the core/shell CQDs dispersions show better SA response than graphene dispersions, and comparable to the recently reported molybdenum disulfide. The carrier dynamics of the SA of the CQDs is analyzed systematically. The research has also found that the two‐photon absorption of the CQDs show nearly cubic power law of the band gap, while the SA performance keeps almost the same in the nonresonant regime. Further, superior passive Q‐switched laser behavior is observed using the CQDs as a saturable absorber. The results directly reveal the physical processes of this basic problem and broaden the applications of CQDs in photonic devices.     

A High-Power,Long-Wavelength Infrared ZnGeP<Subscript>2</Subscript> Opo Pumped by a <Emphasis Type="Italic">Q</Emphasis>-Switched Tm,Ho:GdVO<Subscript>4</Subscript> Laser

We report a high-power, long-wavelength infrared ZnGeP₂ (ZGP) optical parametric oscillator (OPO) pumped by a Q-switched Tm,Ho:GdVO₄ laser. The wavelength tuning range of 7.8–9.9 μm is realized by rotating the external angle of the ZGP crystal. We obtain an output power over 30 mW across the whole wavelength range and achieve a 1.71 W output power at 8.08 μm by transmitting the OPO parameters, corresponding to an idler laser slope efficiency of 12.1%.     

激光传输模拟中基于衍射过程FFT算法的参量优化

为实现采用相位屏法正确模拟准直激光束经湍流大气的传输特性,根据湍流特性、抽样定理以及两屏间衍射过程FFT算法本身所决定的相邻两屏网格间距之间的关系,得出相位屏间距和网格间距确定网格数目最优取值的解析表达式,数值模拟高斯光束经自由空间和湍流大气传输的远场分布,网格数目取解析式求得的最优值848时,光束经自由空间传输的模拟结果与ABCD定律求得的解析结果完全一致;网格数目取836或860时,等效于光束通过偶数相位屏时被正透镜或负透镜阵列会聚或发散,削弱或夸大湍流大气对光束的影响,模拟结果出现严重偏差。     

Optimization of transport protocols in complex networks

In this paper, an optimal routing strategy is proposed to enhance the traffic capacity of complex networks. In order to avoid nodes overloading, the new algorithm is derived on the basis of generalized betweenness centrality which gives an estimate of traffic handled by the node for a route set. Since the nodes with large betweenness centrality are more susceptible to traffic congestion, the traffic can be improved, as our strategy, by redistributing traffic load from nodes with large betweenness centrality to nodes with small betweenness centrality in the proceeding of computing collective routing table. Particularly, depending on a parameter that controls the optimization scale, the new routing can not only enlarge traffic capacity of networks more, but also enhance traffic efficiency with smaller average path length. Comparing results of previous routing strategies, it is shown that the present improved routing performs more effectively.     

Monte Carlo simulation of glandular dose in a dedicated breast CT system

A dedicated breast CT system (DBCT) is a new method for breast cancer detection proposed in recent years. In this paper, the glandular dose in the DBCT is simulated using the Monte Carlo method. The phantom shape is half ellipsoid, and a series of phantoms with different sizes, shapes and compositions were constructed. In order to optimize the spectra, monoenergy X-ray beams of 5-80 keV were used in simulation. The dose distribution of a breast phantom was studied: a higher energy beam generated more uniform distribution, and the outer parts got more dose than the inner parts. For polyenergtic spectra, four spectra of Al filters with different thicknesses were simulated, and the polyenergtic glandular dose was calculated as a spectral weighted combination of the monoenergetic dose.     

Electrical, dielectric and surface wetting properties of multi-walled carbon nanotubes/nylon-6 nanocomposites

This paper reports that the multi-walled carbon nanotubes(MWCNT)/nylon-6 (PA6) nanocomposites with different MWCNT loadingshave been prepared by a simple melt-compounding method. Theelectrical, dielectric, and surface wetting properties of theCNT/PA6 composites have been studied. The temperature dependence ofthe conductivity of the CNT/PA6 composite with 10.0 wt{\%} CNTloading ($\sigma _{\rm RT} \sim 10^{-4}$ S/cm) are measured, andafterwards a charge-energy-limited tunnelling model (ln $\sigma (T)\sim T^{-1/2})$ is found. With increasing CNT weight percentage from0.0 to 10.0 wt%, the dielectric constant of the CNT/PA6composites enhances and the dielectric loss tangent increases twoorders of magnitude. In addition, water contact angles of theCNT/PA6 composites increase and the composites with CNT loadinglarger than 2.0 wt%even become hydrophobic. The obtainedresults indicate that the electrical and surface properties of thecomposites have been significantly enhanced by the embedded carbonnanotubes.     

Quantum information splitting of an arbitrary three-qubit state via the cavity input–output process

We propose a realizable quantum information splitting (QIS) scheme for an arbitrary three-qubit state via the cavity input–output process. In our scheme, a four-qubit cluster state and a three-qubit Greenberger–Horne–Zeilinge (GHZ) state are used as quantum channel. The sender and controller only need to perform Bell-state measurements and a single-qubit measurement, respectively. The receiver can reconstruct the arbitrary three-qubit state by classical communication and local operations. Compared with the scheme in Nie et al. [Optics Communications 284 (2011) 1457], the quantum resources and classical information in our scheme are decreased by 5 qubits and 1 bit, respectively. Moreover, we replace the W-state category measurement in the former with Bell-state measurements and a single-qubit measurement, which is more simple and feasible in experiment.     

膜系光谱系数对膜层参数的一阶和二阶偏导数的计算模型

为了寻找一种膜系深入分析与设计的有力辅助计算工具,从光学薄膜光谱系数的矩阵计算理论出发,基于对矩阵求迹运算的巧妙运用,从数学上建立了准确计算膜系光谱系数关于膜层几何厚度、实际折射率和消光系数等膜层参数的一阶和二阶偏导数的解析模型。这一偏导数计算模型物理上与矩阵理论具有一致的通用性和普适性,适用于任何各向同性的均匀膜系统。在数学上也严格成立,数值编程计算不存在差分近似,精度达到了计算机浮点运算的极限精度。而且算法运算费时少,计算速度快,取得了高度准确性和便于实时化的双重优越性能,非常有利于应用于膜系设计领域来提高膜层数较大时的设计速度和效率。同时,这一模型能非常便捷和准确地给出膜系许多实用的导数信息,对膜系分析、测量和膜厚监控等领域中的相关应用具有重要的参考意义。