Development of enzyme biosensor based on pH-sensitive field-effect transistors for detection of phenolic compounds.

This article describes a biosensor based on pH-sensitive field-effect transistors (pH-FETs) as transducer, and immobilised enzyme tyrosinase as biorecognition element, which was used for the determination of phenolic compounds in water solutions. The biologically active membrane was formed by cross-linking of tyrosinase with bovine serum albumin (BSA) in saturated glutaraldehyde (GA) vapours on the sensitive transducer surface. The main analytical characteristics were studied under different conditions as well as the possibility to optimise these working parameters. Different factors such as the pH of immobilisation, the enzyme loading, the time of exposition to glutaraldehyde vapours were investigated in regards to the influence on sensitivity, limit of detection, dynamic range, and operational and storage stability.     

Cyanide-limited complexation of molybdenum(III): synthesis of octahedral [Mo(CN)(6)](3-) and cyano-bridged [Mo(2)(CN)(11)](5-)

Octahedral coordination of molybdenum(III) is achieved by limiting the amount of cyanide available upon complex formation. Reaction of Mo(CF(3)SO(3))(3) with LiCN in DMF affords Li(3)[Mo(CN)(6)] x 6DMF (1), featuring the previously unknown octahedral complex [Mo(CN)(6)](3-). The complex exhibits a room-temperature moment of mu(eff) = 3.80 mu(B), and assignment of its absorption bands leads to the ligand field parameters Delta(o) = 24800 cm(-1) and B = 247 cm(-1). Further restricting the available cyanide in a reaction between Mo(CF(3)SO(3))(3) and (Et(4)N)CN in DMF, followed by recrystallization from DMF/MeOH, yields (Et(4)N)(5)[Mo(2)(CN)(11)] x 2DMF x 2MeOH (2). The dinuclear [Mo(2)(CN)(11)](5-) complex featured therein contains two octahedrally coordinated Mo(III) centers spanned by a bridging cyanide ligand. A fit to the magnetic susceptibility data for 2, gives J = -113 cm(-1) and g = 2.33, representing the strongest antiferromagnetic coupling yet observed through a cyanide bridge. Efforts to incorporate these new complexes in magnetic Prussian blue-type solids are ongoing.     

Nickel(II)-molybdenum(III)-cyanide clusters: synthesis and magnetic behavior of species incorporating [(Me(3)tacn)Mo(CN)(3)

The substitution of Mo(III) for Cr(III) in metal-cyanide clusters is demonstrated as an effective means of increasing the strength of the magnetic exchange coupling and introducing magnetic anisotropy. Synthesis of the octahedral complex [(Me(3)tacn)Mo(CN)(3)] (Me(3)tacn = N,N',N"-trimethyl-1,4,7-triazacyclononane) is accomplished with the addition of precisely 3 equiv of LiCN to a solution of [(Me(3)tacn)Mo(CF(3)SO(3))(3)] in DMF. An excess of LiCN prompts formation of a seven-coordinate complex, [(Me(3)tacn)Mo(CN)(4)](1)(-), whereas less LiCN produces multinuclear species such as [(Me(3)tacn)(2)Mo(2)(CN)(5)](1+). In close parallel to reactions previously performed with [(Me(3)tacn)Cr(CN)(3)], assembly reactions between [(Me(3)tacn)Mo(CN)(3)] and [Ni(H(2)O)(6)](2+) or [(cyclam)Ni(H(2)O)(2)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) afford face-centered cubic [(Me(3)tacn)(8)Mo(8)Ni(6)(CN)(24)](12+) and linear [(Me(3)tacn)(2)(cyclam)NiMo(2)(CN)(6)](2+) clusters, respectively. Generation of the former involves a thermally induced cyanide linkage isomerization, which rapidly leads to a low-spin form of the cluster containing diamagnetic Ni(II) centers. The cyclic voltammagram of this species in DMF reveals a sequence of six successive reduction waves spaced approximately 130 mV apart, suggesting class II mixed-valence behavior upon reduction. The magnetic properties of the aforementioned linear cluster are consistent with the expected ferromagnetic coupling and an S = 4 ground state, but otherwise vary slightly with the specific conformation adopted (as influenced by the packing of associated counteranions and solvate molecules in the crystal). Magnetization data indicate an axial zero-field splitting parameter with a magnitude falling in the range [D] = 0.44-0.72 cm(-1), and fits to the magnetic susceptibility data yield exchange coupling constants in the range J = 17.0-17.6 cm(-1). These values represent significant increases over those displayed by the analogous Cr(III)-containing cluster. When perchlorate is used as a counteranion, [(Me(3)tacn)(2)(cyclam)NiMo(2)(CN)(6)](2+) crystallizes from water in a dimeric form with pairs of the linear clusters directly linked via hydrogen bonding. In this case, fitting the magnetic susceptibility data requires use of two coupling constants: one intramolecular with J = 14.9 cm(-1) and another intermolecular with J' = -1.9 cm(-1). Reacting [(Me(3)tacn)Mo(CN)(3)] with a large excess of [(cyclam)Ni(H(2)O)(2)](2+) produces a [(Me(3)tacn)(2)(cyclam)(3)(H(2)O)(2)Ni(3)Mo(2)(CN)(6)](6+) cluster possessing a zigzag structure that is a simple extension of the linear cluster geometry. Its magnetic behavior is consistent with weaker ferromagnetic coupling and an S = 6 ground state. Similar reactions employing an equimolar ratio of reactants afford related one-dimensional chains of formula [(Me(3)tacn)(cyclam)NiMo(CN)(3)](2+). Once again, the ensuing structure depends on the associated counteranions, and the magnetic behavior indicates ferromagnetic coupling. It is hoped that substitutions of the type exemplified here will be of utility in the design of new single-molecule magnets.     

Maleation of poly(3,4‐epoxy‐1‐butene) for accelerated crosslinking in the presence of a redox catalyst

Accelerated crosslinking of novel poly(3,4‐epoxy‐1‐butene) (3,4‐PEPB) oligomers in the presence of a cobalt‐based redox catalyst was investigated. Previous studies using model compounds, 3,4‐dimethoxy‐1‐butene and 1,4‐dimethoxy‐2‐butene, suggested that maleation of hydroxyl‐terminated 3,4‐PEPB oligomers would result in more rapid crosslinking in thin films. Novel maleated oligomers offered a unique combination of both electron‐rich and electron‐poor olefinic sites, and quantitative maleation significantly increased the crosslinking rate of 3,4‐PEPB. Efficient copolymerization between terminal maleate groups and olefinic groups in the repeating unit was proposed to account for accelerated crosslinking rates. Furthermore, the addition of novel reactive diluents, such as maleic acid mono‐ethyl ester, also effectively improved the 3,4‐PEPB crosslinking rate. Sol fraction measurements as a function of coating thickness revealed that the crosslinking rate versus oxygen diffusion was less significant for the maleated oligomers because of the presence of reactive electron‐poor olefins. Sol fractions were constant for catalyst concentrations greater than 0.25–0.50 wt % (as compared with oligomer feed). This observation suggested that a redox process was not a dominant factor in determining crosslinking rates at various experimental conditions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2789–2798, 2002     

Preparation of isoprostanes and neuroprostanes

A new approach to isoprostanes and neuroprostanes featuring cis-dialkyl stereochemistry at the cyclopentane ring has been developed by employing an intramolecular cross-coupling reaction of an alkyl iodide and a tethered alkenylsiloxane for stereoselective installation of a functionalized omega-side chain.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

The chemistry of fluorine containing phosphaalkenes, arsaalkenes and selenocarbonyls

This review covers our extensive research activities in the area of fluorine containing phospha- and arsaalkenes as well as selenocarbonyls, which differ considerably in their properties and reactivities from their alkyl and aryl counterparts and thus contribute in a gratifying manner to the still growing field of unsaturated element-carbon compounds of 3rd and 4th row main group elements E. Of particular interest is the influence of the fluorine substituents and other small groups (OR, NR₂) with either inductive and/or mesomeric effects on the polarity and reactivity of the EC bond. Addition reactions of proton acidic and hydridic polar HX reactants as well as [2+2], [3+2] and [4+2] cycloadditions have been thoroughly studied. The results obtained allow a classification of the EC systems within five different types, A to E, and prove a change from “normal” to “inverse” heteroalkenes in this sequence. The ligand properties of some derivatives have also been investigated in some detail.     

Resonance Rayleigh scattering method for the recognition and determination of double-stranded DNA using amikacin

In weakly acidic buffer medium, the interaction of amikacin with calf thymus DNA, yeast RNA and denatured DNA has been investigated by using resonance Rayleigh scattering (RRS) technique. The result shows that calf thymus DNA is capable of enhancing the RRS intensity of the amikacin, while yeast RNA and denatured DNA have very little enhancement effect. Based on the characteristics, a sensitive assay for detecting double-stranded DNA in the presence of denatured DNA and yeast RNA has been developed. The enhancement of the RRS signal is directly proportional to the concentration of double-stranded DNA in the range 0.02-12.0 μg ml⁻¹ for calf thymus DNA and its detection limit (3σ) is 2.5 ng ml⁻¹. The method shows a wide linear range and high sensitivity, and almost no interference can be observed from RNA, denatured DNA, amino acid and most of the metal ions. The trace amounts of nucleic acid in synthetic samples and practical samples are determined with satisfactory results. Therefore, the proposed method is promising for as an effect means for recognition in vivo and determination in situ of double-stranded DNA.     

Xyloccensin L, a novel limonoid from Xylocarpus granatum

The isolation and structure elucidation of xyloccensin L from the stem bark of Xylocarpus granatum is described. Xyloccensin L is a highly oxidized heptacyclic A, B, D-seco limonoid with an α-8, 30-epoxy ring and a rare 1, 29 oxygen bridge.     

An Autonomous Chemical Robot Discovers the Rules of Inorganic Coordination Chemistry without Prior Knowledge

We present a chemical discovery robot for the efficient and reliable discovery of supramolecular architectures through the exploration of a huge reaction space exceeding ten billion combinations. The system was designed to search for areas of reactivity found through autonomous selection of the reagent types, amounts, and reaction conditions aiming for combinations that are reactive. The process consists of two parts where reagents are mixed together, choosing from one type of aldehyde, one amine and one azide (from a possible family of two amines, two aldehydes and four azides) with different volumes, ratios, reaction times, and temperatures, whereby the reagents are passed through a copper coil reactor. Next, either cobalt or iron is added, again from a large number of possible quantities. The reactivity was determined by evaluating differences in pH, UV‐Vis, and mass spectra before and after the search was started. The algorithm was focused on the exploration of interesting regions, as defined by the outputs from the sensors, and this led to the discovery of a range of 1‐benzyl‐(1,2,3‐triazol‐4‐yl)‐N‐alkyl‐(2‐pyridinemethanimine) ligands and new complexes: [Fe(L¹)₂](ClO₄)₂ ( 1 ); [Fe(L²)₂](ClO₄)₂ ( 2 ); [Co₂(L³)₂](ClO₄)₄ ( 3 ); [Fe₂(L³)₂](ClO₄)₄ ( 4 ), which were crystallised and their structure confirmed by single‐crystal X‐ray diffraction determination, as well as a range of new supramolecular clusters discovered in solution using high‐resolution mass spectrometry.