Adsorption Study of Immunoglobulin G Subclasses from Different Species by Pseudobioaffinity Separation on Histidyl–Bisoxirane–Sepharose

Adsorption chromatography is increasingly used for protein separations and biomedical applications. Therapeutic molecules such as antibodies, cytokines, therapeutic DNA, and plasma proteins must be purified before characterization and utilization. Use of immunoglobulins as immunodiagnostic and therapeutic tools has initiated many attempts to develop new adsorbents for their separation. Protein A and protein G are the affinity ligands most widely used for separation of immunoglobulins. These proteins are reliable, and have good selectivity and specificity, but are very expensive. Much attention has therefore been devoted to developing alternative methods for separation of immunoglobulins. Pseudobiospecific ligands, for example metal ions and amino acids, can be used for separation of a wide range of biological molecules. In this study, IgG₁, IgG₂, and IgG₃, three subclasses of human IgG, were separated from human serum using the amino acid histidine grafted on to bisoxirane-activated Sepharose, as pseudobiospecific adsorbent. Adsorption of IgG from different animal species on the same chromatographic adsorbent was also tested. The high recovery and purification on histidyl–bisoxirane–Sepharose gel of IgG from all the sources tested compared well with results obtained by use of protein A–Sepharose gel.

     

KF/Al2O3 Mediated Multicomponent Reactions for the Efficient Synthesis of Highly Substituted Dihydropyridines

KF/Al₂O₃ was found to be an efficient solid supported catalyst for the facile access of highly substituted dihydropyridine derivatives from the multicomponent reaction of aromatic aldehydes, amines, malononitrile, and alkylacetylenedicarboxylates. The notable advantages of this protocol are reusable catalyst, good yields, applicable to a wide range of substrates for the synthesis of pharmacologically interesting dihydropyridine derivatives.     

<Emphasis Type="Italic">bis</Emphasis>(<Emphasis Type="Italic">N,N</Emphasis>-diethylnicotinamide) <Emphasis Type="Italic">p</Emphasis>-chlorobenzoate complexes of Ni(II), Zn(II) and Cd(II)

Three novel mixed ligand complexes of Ni(II), Zn(II) and Cd(II) with p-chlorobenzote and N,N-diethylnicotinamide were synthesised and characterized on the basis of elemental analysis, FTIR spectroscopic analysis, solid state UV-Vis spectrometric and magnetic susceptibility data. The thermal behavior of the complexes was studied by simultaneous TG-DTA methods in static air atmosphere and the mass spectra data were recorded. According to microanalytical results, formulas of complexes are C₃₄H₄₀N₄O₈ClNi, C₃₄H₄₀N₄O₈ClZn and C₃₄H₄₄N₄O₁₀ClCd. The complexes contain two moles of coordination waters, two moles p-chlorobenzoate and two mole N,N-diethylnicotinamide (dena) ligands per formula unit. In these complexes, the p-chlorobenzoate and N,N-diethylnicotinamide behave as monodentate ligand through acidic oxygen and nitrogen of pyridine ring. The decomposition pathways and the stability of the complexes are interpreted in the terms of the structural data. The final decomposition products were found to be as metal oxides.     

Novel K+-doped Na0.6Mn0.35Fe0.35Co0.3O2 cathode materials for sodium-ion batteries: synthesis,structures, and electrochemical properties

Journal of Solid State Electrochemistry - A series of novel KxNa0.6-xMn0.35Fe0.35Co0.3O2 (x = 0, 0.005, 0.01, 0.05, 0.1) materials were successfully synthesized by the solid-state...     

Electron immigration from shallow traps to deep traps by tunnel mechanism on Seydi?ehir aluminas

In this study, the fading mechanism of Seydi?ehir alumina in Turkey, which is considered to be used for radiation dosimetric purposes, was investigated. The materials were first exposed to beta radiation and then stored in dark and dry ambient conditions at room temperature (RT) at previously desired storage periods. It was observed that the glow curve of Seydi?ehir alumina consists of four glow peaks between RT and 400 °C. The glow peaks (peaks 1, 2 and 3) between room temperature and 250 °C possessed very high levels of anomalous fading. However, the intensity of new glow peak at around 378 °C is highly increased with time. As a result of the experimental studies, it was concluded that the reason behind anomalous fading can be explained by means of tunneling (quantum tunneling) mechanism.     

Preparation and characterization of 3-[(1H-1,2,4-triazole-3-ylimino)methyl]naphtalene-2-ol film at the platinum surface for selective voltammetric determination of dopamine in the presence of uric acid and ascorbic acid

A [(1H-1,2,4-triazole-3-ylimino)methyl]naphthalene-2-ol (TMN-2-ol) film modified platinum (Pt) electrode has been fabricated by the electrochemical oxidation in acetonitrile solution. The modified surface was characterized by electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS). The prepared Pt electrode can be used as a functional interface to sensitive and selective determination of dopamine (DA) in the presence of uric acid (UA) and ascorbic acid (AA) by square wave voltammetry (SWV) method. The limit of detection (LOD) and limit of quantification (LOQ) of DA were 9.25 × 10⁻⁸ and 2.78 × 10⁻⁷ M, respectively. Linear range of DA was found to be between 3.95 × 10⁻⁷ and 4.19 × 10⁻⁶ M.     

MIL‐53(Al) as a Versatile Platform for Ionic‐Liquid/MOF Composites to Enhance CO2 Selectivity over CH4 and N2

Five different imidazolium‐based ionic liquids (ILs) were incorporated into a metal–organic framework (MOF), MIL‐53(Al), to investigate the effect of IL incorporation on the CO₂ separation performance of MIL‐53(Al). CO₂, CH₄, and N₂ adsorption isotherms of the IL/MIL‐53(Al) composites and pristine MIL‐53(Al) were measured to evaluate the effect of the ILs on the CO₂/CH₄ and CO₂/N₂ selectivities of the MOF. Of the composite materials that were tested, [BMIM][PF₆]/MIL‐53(Al) exhibited the largest increase in CO₂/CH₄ selectivity, 2.8‐times higher than that of pristine MIL‐53(Al), whilst [BMIM][MeSO₄]/MIL‐53(Al) exhibited the largest increase in CO₂/N₂ selectivity, 3.3‐times higher than that of pristine MIL‐53(Al). A comparison of the CO₂ separation potentials of the IL/MOF composites showed that the [BMIM][BF₄]‐ and [BMIM][PF₆]‐incorporated MIL‐53(Al) composites both showed enhanced CO₂/N₂ and CO₂/CH₄ selectivities at pressures of 1–5 bar compared to composites of CuBTC and ZIF‐8 with the same ILs. These results demonstrate that MIL‐53(Al) is a versatile platform for IL/MOF composites and could help to guide the rational design of new composites for target gas‐separation applications.     

Fluorination of alkylamidine hydrochlorides with elemental fluorine

Conclusions Conditions were found for selectively fluorinating the guanyl group of alkyl-substituted amidines with elemental fluorine without touching the alkyl radical.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2139–2141, September, 1977.     

Synthesis of styryl-linked fused dihydropyridines by catalyst-free multicomponent reactions

Molecular Diversity - Herein, we report a rapid catalyst-free three-component reaction of 2-hydroxy-1,4-naphthoquinone, cinnamaldehydes and 3-aminopyrazoles in ethanol medium under reflux...     

Recognition-directed orthogonal self-assembly of polymers and nanoparticles on patterned surfaces

We demonstrate the patterning of silica substrates with thymine (Thy-PS) and positively charged N-methylpyridinium (PVMP) polymers using photolithography and the subsequent orthogonal modification of these surfaces using diaminopyridine-functionalized polystyrene (DAP-PS) and carboxylate-derivatized CdSe/ZnS core-shell nanoparticles (COO-NP) through diamidopyridine-thymine three-point hydrogen bonding and pyridinium-carboxylate electrostatic interactions, respectively. This two-component orthogonal surface modification was accomplished in a self-sorting, single-step fashion, providing a versatile tool for the rapid and efficient creation of complex materials.