Agro-industrial waste enzymes: Perspectives in circular economy

According to the Food and Agriculture Organization of the United Nations, approximately 1.3 billion tons of food is wasted each year, equivalent to approximately one-third of world production. Agri-food wastes are the source of proteins, carbohydrates, lipids, and other essential minerals that have been exploited for value-added products by the development of biorefineries and sustainable business as important elements of circular economies. The innovation and materialization of these types of processes, including the use of disruptive technologies on microbial bioconversion and enzyme technology, such as nanotechnology, metabolic engineering, and multi-omics platforms, increase the perspectives on the waste valorization process. Lignocellulolytic enzymes, pectinases, and proteases are mainly used as catalyzers on agri-food waste treatment, and their production in house might be the trend in near future for agro-industrial countries. Another way to transform the agri-food wastes is via aerobic or anaerobic microbial process from fungal or bacterial cultures; these processes are the key to produce waste enzymes.     

High-temperature thermal behaviour of Cr-Doped LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> spinels synthesized by the sucrose-aided combustion method

Chromium doped spinels LiCr_YMn_2−YO₄ (0.2≤Y≤0.8) has been synthesized by the sucrose-aided combustion procedure. The thermal behaviour, phase homogeneity and structural characteristics of the samples were studied by thermal analysis, coupled mass spectrometry, and room-and high-temperature X-ray diffraction methods. It was found that the ‘as prepared’ samples contained residual organic impurities undetectable for X-ray diffraction, that burn out completely at 400°C. Samples treated between 400 and 750°C are single phase spinels, whose crystallites size increase from 10 to 50 nm on increasing the temperature. Cr-doping enhances the thermal stability of the spinels, which augments on increasing the Cr content Y. The enhanced thermal stability of the spinels has been accounted for based on the high excess stabilization energy of Cr³⁺ in octahedral ligand field.     

On-line preconcentration of mercury by sorption on an anion-exchange resin loaded with 1,5-bis[(2-pyridyl)-3-sulphophenyl methylene] thiocarbonohydrazide and determination by cold-vapour inductively coupled plasma atomic emission

1,5-Bis[(2-pyridyl)-3-sulphophenyl methylene] thiocarbonohydrazide (PSTH) immobilized on an anion-exchange resin (Dowex) has been used for the on-line preconcentration of mercury from biological samples and waters prior to its determination by inductively coupled plasma atomic emission spectroscopy. The metal was eluted from the column using a solution of 2 M HNO(3) and mixed on-line with SnCl(2). The optimum experimental conditions were evaluated for the continuous preconcentration of Hg, the direct generation of mercury vapour and the final determination of this element by ICP-AES. The enrichment, together with low blank levels of the optimized procedure, allow the simple determination of this toxic element at concentrations down to a few nanograms per milliliter. The proposed method has a linear calibration range 5-1000 ng ml(-1) of mercury, with a detection limit of 4 ng ml(-1) (S/N=3) and a sampling rate of 40 h(-1), investigated with a 9 ml sample volume. The precision of the method (evaluated as the relative standard deviation obtained after analyzing ten series of ten replicates) was +/-3.6% at the 10 ng ml(-1) level of Hg(II) and +/-1.3% at the 100 ng ml(-1) level. The accuracy of the method was examined by the analysis of certified reference materials.     

Evaluation of various N-phenylthiosemicarbazones as chromogenic reagents in spectrophotometric analysis

The synthesis, physicochemical properties and interactions with metal ions of three new reagents of the N-phenylthiosemicarbazone family, namely pyridoxal phenylthiosemicarbazone, 3-hydroxypyridine-2-aldehyde phenylthiosemicarbazone and 2,6-diacetylpyridine bis(phenylthiosemicarbazone), as well as their ionization constants and the spectral features of their complexes with transition-element cations are reported. A photometric determination of cobalt with pyridoxal phenylthiosemicarbazone in perchloric acid medium is proposed and has been used in analysis of steels.     

Cyclohexylethynyl complexes of CoII and FeII

This paper deals with the synthesis of six σ-cyclohexylethynyl complexes of Co^II and Fe^II and their characterization by chemical analysis, infrared and ¹H NMR spectra, and magnetic measurements. Four of them are six-coordinate complexes, unsubstituted or substituted, namely K₄[M(C≡C—C₆H₁₁)₆] nNH₃(M = Co, n = 2; M = Fe, n = 0), K₂[Co(C≡C₆H₁₁)₄(NH₃)₂] and K₄[Fe(CN)₄-(C≡C—C₆H₁₁)₂]. Two are four-coordinate complexes of formula [(Ph₃P)₂M-(C≡C₆H₁₁)₂] (M = Co, Fe). All are low-spin complexes, the magnetic moment for the six-coordinate Co(II) complexes, measured at various temperatures, being intermediate between low- and high-spin values.     

Two problematic human polymorphic Alu insertions

Analysis of two previously described polymorphic Alu insertions (Sb19.3 and NBC3) in world-wide human populations generated genotypic frequencies grossly in violation of Hardy-Weinberg equilibrium expectations. GenBank searches at the National Center for Biotechnology Information (NCBI) and sequencing analyses revealed that samples homozygous for the Sb19.3 Alu insertion amplify a band indistinguishable in size to the lack of insertion amplicon, corresponding to a paralogous locus on chromosome 4. This locus displays a very similar sequence (84%) to that flanking the Sb19.3 Alu insertion located at chromosome 19. Moreover, we have determined that NBC3, a different Alu insertion, is not located in the pseudoautosomal region of the Y-chromosome, as previously reported, but in position Yq11.2. Also, the band that mimics the lack of insertion amplicon corresponds to a paralogous locus located at chromosome X with a similarity of 92% to the sequence flanking the NBC3 Alu insertion. Finally, the utilization of newly designed primers avoided amplification from the paralogous loci and allowed a reliable assignation of genotypes for both loci. Unlike previously reported, using our new primers the Y-specific locus NBC3 was found not to be polymorphic in the populations analyzed.     

Determination of zinc by flow injection with fluorimetric detection in a micellar medium

A room-temperature flow injection spectrofluorimetric method is presented for the determination of Zn(II), based on the use of salicylaldehyde thiocarbohydrazone in the presence of Triton X-100 and sodium acetate-acetic acid buffer. Various physical and chemical variables affecting the reaction in the flow system were evaluated. The proposed method is very selective. The calibration graph is linear over the range 10-1000 ng/ml, with a detection limit of 5 ng/ml and a relative standard deviation at the 50 ng/ml level of 1.8 %. The method was successfully applied to the determination of Zn(II) in drinking waters and biological samples.     

Fractal Characterization of Silica Sol Prepared by the Sol-Gel Method: From the Sol Formation to the Flocculation Process

The fractal characterization of silica particles prepared by the sol-gel method was obtained; from the beginning of the sol-gel synthesis to the aggregation process of these particles by adding metal ions in solution, the fractal dimension was determined. At the beginning of the sol-gel process, unstable structures were formed due, essentially, to the auto-catalytic nature of the sol-gel condensation reactions; these particles are fractal structures with a fractal exponent corresponding to a reaction limited aggregation regime. As the time proceeds, the reactants are consumed approaching the system to equilibrium, stabilizing the size of the silica particles. The silica sol can be flocculated by adding metal ions in solution. The fractal exponent for the aggregation process was determined, obtaining a value corresponding to a diffusion limited aggregation regime.     

Production of palladium nanoparticles supported on multiwalled carbon nanotubes by gamma irradiation

Palladium nanoparticles were produced and supported on multiwalled carbon nanotubes (MWCNT) by gamma irradiation. A solution with a specific ratio of 2:1 of water-isopropanol was prepared and mixed with palladium chloride and the surfactant sodium dodecyl sulfate (SDS). The gamma radiolysis of water ultimately produces Pd metallic particles that serve as nucleation seeds. Isopropanol is used as an ion scavenger to balance the reaction, and the coalescence of the metal nanoparticles was controlled by the addition of SDS as a stabilizer. The size and distribution of nanoparticles on the carbon nanotubes (CNT) were studied at different surfactant concentrations and radiation doses. SEM, STEM and XPS were used for morphological, chemical and structural characterization of the nanostructure. Nanoparticles obtained for doses between 10 and 40 kGy, ranged in size 5-30 nm. The smaller nanoparticles were obtained at the higher doses and vice versa. Histograms of particle size distributions at different doses are presented.     

Quantum modified Regge–Teitelboim cosmology

In this paper we study the late evolution of Relic Gravitational Waves in coupled dark energy models, where dark energy interacts with cold dark matter. Relic Gravitational Waves are second tensorial order perturbations of the Lemaitre–Friedman–Robertson–Walker metric and experiment an evolution ruled by the scale factor of the metric. We find that the amplitude of Relic Gravitational Waves is smaller in coupled dark energy models than in models with non interacting dark energy. We also find that the amplitude of the waves predicted by the models with coupling term proportional to the dark energy density is smaller than those of the models with coupling term proportional to dark matter density.