Electrochemical evidence of self-substrate inhibition as functions regulation for cellobiose dehydrogenase from Phanerochaete chrysosporium

The reaction mechanism of cellobiose dehydrogenase (CDH) from Phanerochaete chrysosporium, adsorbed on graphite electrodes, was investigated by following its catalytic reaction with cellobiose registered in both direct and mediated electron transfer modes between the enzyme and the electrode. A wall-jet flow through amperometric cell housing the CDH-modified graphite electrode was connected to a single line flow injection system. In the present study, it is proven that cellobiose, at concentrations higher than 200 μM, competes for the reduced state of the FAD cofactor and it slows down the transfer of electrons to any 2e⁻/H⁺ acceptors or further to the heme cofactor, via the internal electron transfer pathway. Based on and proven by electrochemical results, a kinetic model of substrate inhibition is proposed and supported by the agreement between simulation of plots and experimental data. The implications of this kinetic model, called pseudo-ping-pong mechanism, on the possible functions CDH are also discussed. The enzyme exhibits catalytic activity also for lactose, but in contrast to cellobiose, this sugar does not inhibit the enzyme. This suggests that even if some other substrates are coincidentally oxidized by CDH, however, they do not trigger all the possible natural functions of the enzyme. In this respect, cellobiose is regarded as the natural substrate of CDH.     

Rational Design of an Organometallic Glutathione Transferase Inhibitor

Double trouble : A hybrid organic–inorganic (organometallic) inhibitor was designed to target glutathione transferases. The metal center is used to direct protein binding, while the organic moiety acts as the active‐site inhibitor (see picture). The mechanism of inhibition was studied using a range of biophysical and biochemical methods.

     

A p‐Type NiO‐Based Dye‐Sensitized Solar Cell with an Open‐Circuit Voltage of 0.35 V

In tandem : Employing a molecular dyad and a cobalt‐based electrolyte gives a threefold‐increase in open‐circuit voltage (V_OC) for a p‐type NiO device (V_OC=0.35 V), and a fourfold better energy conversion efficiency. Incorporating these improvements in a TiO₂/NiO tandem dye‐sensitized solar cell (TDSC), results in a TDSC with a V_OC=0.91 V (see figure; CB=conductance band, VB= valence band).

     

Synthesis of a Photoresponsive Liquid‐Crystalline Polymer Containing Azobenzene

The synthesis of an oriented liquid‐crystalline photoresponsive polymer, prepared by polymerization of mono‐ and di‐acrylates, both of which contain azobenzene chromophores, is reported. The prepared free‐standing polymer film shows strong reversible photoinduced deformation upon exposure to unpolarized UV light at 366 nm, as a result of an optically induced isomeric change of the azobenzene moieties in the polymer network. The synthesis process is relatively simple and more efficient compared to conventional ones, and can be used to synthesize other liquid‐crystalline photoresponsive polymers. The use of this photoresponsive polymer film as an optical high‐pass/low‐pass switch under UV or natural light irradiation for a laser beam is demonstrated. This photoresponsive polymer may have applications in robotic systems, artificial muscles, and actuators in microelectromechanical systems (MEMS) and labs on chips.

     

Molecular simulation of electrolytes in nanopores

Behaviour of electrolytes confined in cylindrical and slit pores are studied by computer simulations at the molecular level. Previous equilibrium and structural properties obtained by Monte Carlo techniques using the restrictive primitive model are discussed. Transport properties are calculated by the canonical molecular dynamics technique for ions with Lennard–Jones cores. Assuming an external electric potential, the chemical potential of individual ions can be balanced without the need for a grand canonical procedure. The mobility of the counterion is affected by the surface charge density. At a high surface charge, the mean square axial displacement of the counterion calculated is lower than the bulk value due to its high concentration near the charged wall.     

Measurement of toxic volatile organic compounds in indoor air of semiconductor foundries using multisorbent adsorption/thermal desorption coupled with gas chromatography-mass spectrometry

A method for the qualitative and quantitative analysis of volatile organic compounds (VOCs) in the air of class-100 clean rooms at semiconductor fabrication facilities was developed. Air samples from two semiconductor factories were collected each hour on multisorbent tubes (including Carbopack B, Carbopack C, and Carbosieve SIII) with a 24-h automatic active sampling system and analyzed using adsorption/thermal desorption coupled with gas chromatography-mass spectrometry. Experimental parameters, including thermal desorption temperature, desorption time, and cryofocusing temperature, were optimized. The average recoveries and the method detection limits for the target compounds were in the range 94-101% and 0.31-0.89 ppb, respectively, under the conditions of a 1 L sampling volume and 80% relative humidity. VOCs such as acetone, isopropyl alcohol, 2-heptanone, and toluene, which are commonly used in the semiconductor and electronics industries, were detected and accurately quantified with the established method. Temporal variations of the analyte concentrations observed were attributed to the improper use of organic solvents during operation.     

Direct electrochemistry and bioelectrocatalysis of a class II non-symbiotic plant haemoglobin immobilised on screen-printed carbon electrodes

In this study, direct electron transfer (ET) has been achieved between an immobilised non-symbiotic plant haemoglobin class II from Beta vulgaris (nsBvHb2) and three different screen-printed carbon electrodes based on graphite (SPCE), multi-walled carbon nanotubes (MWCNT-SPCE), and single-walled carbon nanotubes (SWCNT-SPCE) without the aid of any electron mediator. The nsBvHb2 modified electrodes were studied with cyclic voltammetry (CV) and also when placed in a wall-jet flow through cell for their electrocatalytic properties for reduction of H₂O₂. The immobilised nsBvHb2 displayed a couple of stable and well-defined redox peaks with a formal potential (E°′) of ?33.5 mV (vs. Ag|AgCl|3 M KCl) at pH 7.4. The ET rate constant of nsBvHb2, k _s, was also determined at the surface of the three types of electrodes in phosphate buffer solution pH 7.4, and was found to be 0.50 s^?1 on SPCE, 2.78 s^?1 on MWCNT-SPCE and 4.06 s^?1 on SWCNT-SPCE, respectively. The average surface coverage of electrochemically active nsBvHb2 immobilised on the SPCEs, MWCNT-SPCEs and SWCNT-SPCEs obtained was 2.85?×?10^?10 mol cm^?2, 4.13?×?10^?10 mol cm^?2 and 5.20?×?10^?10 mol cm^?2. During the experiments the immobilised nsBvHb2 was stable and kept its electrochemical and catalytic activities. The nsBvHb2 modified electrodes also displayed an excellent response to the reduction of hydrogen peroxide (H₂O₂) with a linear detection range from 1 μM to 1000 μM on the surface of SPCEs, from 0.5 μM to 1000 μM on MWCNT-SPCEs, and from 0.1 μM to 1000 μM on SWCNT-SPCEs. The lower limit of detection was 0.8 μM, 0.4 μM and 0.1 μM at 3σ at the SPCEs, the MWCNT-SPCEs, and the SWCNT-SPCEs, respectively, and the apparent Michaelis–Menten constant, $ {\hbox{K}}_{\rm{M}}^{\rm{app}} $ , for the H₂O₂ sensors was estimated to be 0.32 mM , 0.29 mM and 0.27 mM, respectively.     

Studies on tolonium chloride labeled with radioiodine

Tolonium chloride is a common reagent in the diagnosis of oral premalignant and malignant lesions. This study establishes the optimal preparation of radioiodinated tolonium chloride (RTC) and evaluate its radiochemical and biological characteristics. Instant thin layer chromatography (ITLC), ion exchange chromatography (IC), paper electrophoresis, and the effect of pH on labeling efficiency revealed the chemical characterization of RTC. Biodistribution, blood clearance, urinary excretion, toxic effect, and Lugol’s solution effect on the thyroid uptake of RTC revealed RTCs biological characteristics. The optimal labeling condition was pH = 2.96 after 15 h stirring, the labeling efficiency was 60%. After purification by IC, the radiochemical purity of RTC was 94%, and the shelf life of RTC was at least 90 days. In the biodistribution study, the liver was major target organs, approximated 6.11% of injected dose accumulate in per gram of tissue (6.11% ID/g) at 10 min after injection. The tissue-to-blood radioactivity ratio significant (p < 0.05) increased with reaction time. In liver, the tissue-to-blood radioactivity ratio was 2.2 ± 0.51 at 10 min after injection, and increased to 22.4 ± 4.52 at 120 min after injection. The blood clearance study showed a significant decrease in blood radioactivity. The radioactivity in the blood was about 2.76% of the injected dose per milliliter blood at 10 min post-injection, but decreased to 0.12% at 120 min post-injection. Lugol’s solution does not affect the thyroid uptake of RTC. Almost all the administered RTC recovered at 60 h after injection, with 79% recovered in feces and 17% recovered in urine. This study shows that RTC is non-toxic, and may be suitable as a liver imaging agent.     

Spherical polymer brushes under good solvent conditions: molecular dynamics results compared to density functional theory

A coarse grained model for flexible polymers end-grafted to repulsive spherical nanoparticles is studied for various chain lengths and grafting densities under good solvent conditions by molecular dynamics methods and density functional theory. With increasing chain length, the monomer density profile exhibits a crossover to the star polymer limit. The distribution of polymer ends and the linear dimensions of individual polymer chains are obtained, while the inhomogeneous stretching of the chains is characterized by the local persistence lengths. The results on the structure factor of both single chain and full spherical brush as well as the range of applicability of the different theoretical tools are presented. Finally, a brief discussion of the experiment is given.