Kinetic determination of ultramicro amounts of copper

A new catalytic reaction is proposed and a kinetic method developed for the determination of ultramicro amounts of Cu(II) on the basis of its catalytic activity in oxidation of the 2-thiosemicarbazone of sodium 1,2-naphthoquinone-4-sulphonate by hydrogen peroxide in the presence of ascorbic acid. Under optimal conditions the sensitivity of the method is 0.25 ng/ml. The relative error is 4.8-18.2% for the concentration range 5-0.8 ng/ml. Most foreign ions do not change the rate of the catalysed reaction. Co(2+) and I(-) catalyse the reaction, Ni(2+) extensively inhibits it, and in the presence of EDTA only the uncatalysed reaction takes place.     

Structures of chaos in open reaction systems

By numerically simulating the Bray-Liebhafsky (BL) reaction (the hydrogen peroxide decomposition in the presence of hydrogen and iodate ions) in a continuously fed well stirred tank reactor (CSTR), we find "structured" types of chaos emerging in regular order with respect to flow rate as the control parameter. These chaotic "structures" appear between each two successive periodic states, and have forms and evolution resembling to the neighboring periodic dynamics. More precisely, in the transition from period-doubling route to chaos to the arising periodic mixture of different mixed-mode oscillations, we are able to recognize and qualitatively and quantitatively distinguish the sequence of "period-doubling" chaos and chaos consisted of mixed-mode oscillations (the "mixed-mode structured" chaos), both appearing in regular order between succeeding periodic states. Additionally, between these types of chaos, the chaos without such recognizable "structures" ("unstructured" chaos) is also distinguished. Furthermore, all transitions between two successive periodic states are realized through bifurcation of chaotic states. This scenario is a universal feature throughout the whole mixed-mode region, as well as throughout other mixed-mode regions obtained under different initial conditions.     

Interpretative optimization and artificial neural network modeling of the gas chromatographic separation of polycyclic aromatic hydrocarbons

An interpretative strategy (factorial design experimentation+total resolution analysis+chromatogram simulation) was employed to optimize the separation of 16 polycyclic aromatic hydrocarbons (PAHs) (naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, chrysene, benzo(a)anthracene, benzo(k)fluoranthene, benzo(b)fluoranthene, benzo(a)pyrene, indeno(1,2,3-c,d)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene) in temperature-programmed gas chromatography (GC). Also, the retention behavior of PAHs in the same GC system was studied by a feed-forward artificial neural network (ANN). GC separation was investigated as a function of one (linear temperature ramp) or two (linear temperature ramp+the final hold temperature) variables. The applied interpretative approach resulted in rather good agreement between the measured and the predicted retention times for PAHs in both one and two variable modeling. The ANN model, strongly affected by the number of input experiments, was shown to be less effective for one variable used, but quite successful when two input variables were used. All PAHs, including difficult to separate peak pairs (benzo(k)fluoranthene/benzo(b)fluoranthene and indeno(1,2,3-c,d)pyrene/dibenzo(a,h)anthracene), were separated in a standard (5% phenyl-95% dimethylpolysiloxane) capillary column at an optimum temperature ramp of 8.0 degrees C/min and final hold temperature in the range of 260-320 degrees C.     

Intermolecular potential energy surface and spectra of He-HCl with generalization to other rare gas-hydrogen halide complexes

A two-dimensional (rigid monomer) intermolecular potential energy surface (PES) of the He-HCl complex has been obtained from ab initio calculations utilizing the symmetry-adapted perturbation theory (SAPT) and an spdfg basis set including midbond functions. The bond length in HCl was chosen to be equal to the expectation value in the ground vibrational state of isolated HCl. The rigid-monomer potential should be a very good approximation to the complete (three-dimensional) potential for H-Cl distances corresponding to the lowest vibrational levels of the monomer since the He-HCl interaction energy was found to be only weakly dependent on the HCl bond length in this region, at least as compared to systems such as Ar-HF. The calculated points were fitted using an analytic function with ab initio computed asymptotic coefficients. As expected, the complex is loosely bound, with the dispersion energy providing the majority of the attraction. Our SAPT PES agrees with the semiempirical PES of Willey et al. [J. Chem. Phys. 96, 898 (1992)], in finding that, atypically for rare gas-hydrogen halide complexes including the lighter halide atoms, the global minimum is on the Cl side (with intermonomer separation 3.35 A and depth of 32.8 cm(-1)), rather than on the H side, where there is only a local minimum (3.85 A, 30.8 cm(-1)). The ordering of the minima was confirmed by single-point calculations in larger basis sets and complete basis set extrapolations, and also using higher levels of theory. We show that the opposite findings in the recent calculations of Zhang and Shi [J. Mol. Struct: THEOCHEM 589, 89 (2002)] are due to the lack of midbond functions in their basis set. Despite the closeness in depth of the two linear minima, the existence of a relatively high barrier between them invalidates the assumption of isotropy, a feature of some literature potentials. The trends concerning the locations of minima within the family of rare gas-hydrogen halide complexes are rationalized in terms of the physical components of the intermolecular forces and related to monomer properties. The accuracy of the SAPT PES was tested by performing calculations of rovibrational levels. The transition frequencies obtained were found to be in excellent agreement (to within 0.02 cm(-1)) with the measurements of Lovejoy and Nesbitt [J. Chem. Phys. 93, 5387 (1990)]. The SAPT PES predicts a dissociation energy for the complex of 7.74 cm(-1) which is probably more accurate than the experimental value of 10.1+/-1.2 cm(-1). Our analysis of the ground-state rovibrational wave function shows that the He-HCl configuration is favored over the He-ClH configuration despite the ordering of minima. This is due to the greater volume of the well in the former case. We have also determined positions and widths of three low-lying resonance states through scattering calculations. These predictions are expected to be more accurate than values derived from experiment.     

Possible existence of alkali metal orthocarbonates at high pressure

We investigate the possible existence of crystalline alkali metal orthocarbonates, A(4)CO(4), where A=Li, Na, K, Rb, and Cs. We study the equilibrium between the possible modifications of the orthocarbonate A(4)CO(4) and the binary mixture of the possible modifications of the alkali oxide A(2)O and those of the alkali metal carbonate A(2)CO(3) as function of pressure. In all cases, the orthocarbonate should be stable at sufficiently high pressure ranging from 22-32 GPa (Rb(4)CO(4)) to 200-220 GPa (Cs(4)CO(4)).     

Analysis of human hippocampus gangliosides by fully-automated chip-based nanoelectrospray tandem mass spectrometry

Modern microfluidic devices are currently introduced in electrospray (ESI) mass spectrometry (MS), tending to substitute the classical capillary-based ESI infusion. Automated systems using the combination of robotized sample handling and chip-based ESI are significantly increasing the analysis reproducibility, precision, throughput, and efficiency. In the last couple of years our group developed the chip-based ESI-MS approach for glycomics in biomedical research and applied it for oligosaccharide, glycopeptide and ganglioside investigation. Here we report upon the optimization and application of this modern technique for the analysis of differential ganglioside expression patterns in human fetal and adult hippocampus. By this methodology, ganglioside species exhibiting high degree of heterogeneity in the ceramide motifs and biologically-relevant modifications could be identified in human hippocampus. The ultra-high reproducibility of the experiments uniquely provided by the chip-ESI approach allowed for a reliable MS-based ganglioside comparative assay. Moreover, the particular feature of chip ESI-tandem MS to provide structural information at high sensitivity was useful for detailed characterization of hippocampus-associated species. The experimental data presented in this study indicate the benefits of microfluidic/MS for determination of the topospecific brain ganglioside composition and development-related changes in their expression, which might be of high value in clinical investigation and for studies related to ganglioside-based therapy of central nervous system diseases.     

Molecular fluorescent pH-probes based on 8-hydroxyquinoline

Three 5,7-pi-extended 8-benzyloxyquinolines, namely 5,7-diphenyl-, 5,7-bis(biphenyl-4-yl)- and 5,7-bis(4-dibenzothiophenyl)-8-benzyloxyquinoline were prepared and investigated as fluorescent pH-probes in nonaqueous solution. Absorption and photoluminescence spectra of the introduced compounds also including the starting material 8-benzyloxy-5,7-dibromoquinoline as well as their N-protonated counterparts were recorded and the results were rationalized by quantum-chemical calculations. A pronounced red shift of the emission occurred upon protonation of the non halogenated derivatives, while the dibromo-derivative is hardly emissive and is virtually not protonated under the conditions used. The diphenyl- and the bis(biphenyl)-derivative especially show promising photoluminescence quantum yields both in the parent and the protonated state making them candidates for the active component in pH sensing applications.     

Möbius and twisted graphene nanoribbons: stability, geometry, and electronic properties

Results of classical force field geometry optimizations for twisted graphene nanoribbons with a number of twists N(t) varying from 0 to 7 (the case N(t)=1 corresponds to a half-twist M?bius nanoribbon) are presented in this work. Their structural stability was investigated using the Brenner reactive force field. The best classical molecular geometries were used as input for semiempirical calculations, from which the electronic properties (energy levels, HOMO, LUMO orbitals) were computed for each structure. CI wavefunctions were also calculated in the complete active space framework taking into account eigenstates from HOMO-4 to LUMO+4, as well as the oscillator strengths corresponding to the first optical transitions in the UV-VIS range. The lowest energy molecules were found less symmetric than initial configurations, and the HOMO-LUMO energy gaps are larger than the value found for the nanographene used to build them due to electronic localization effects created by the twisting. A high number of twists leads to a sharp increase of the HOMO-->LUMO transition energy. We suggest that some twisted nanoribbons could form crystals stabilized by dipolar interactions.     

Corrosion of Cu-xZn alloys in slightly alkaline chloride solutions studied by stripping voltammetry and microanalysis

The mechanism of corrosion of Cu-xZn alloys (x = 10-40 wt %) in slightly alkaline chloride solutions was investigated by analysing solid reaction products by energy dispersive X-ray analysis (EDS) and dissolved reaction products by differential anodic pulse stripping (DAPS) voltammetry. The corrosion process was studied under open circuit and under potentiostatic conditions at selected potentials. Pure metals were studied comparatively so that an interacting effect of particular metal components in the alloy could be determined. All four Cu-xZn alloys show an improved behaviour compared to pure metals. Under open-circuit condition both components dissolve simultaneously in the solution. With increasing immersion time the preferential, dissolution of zinc in the solution becomes pronounced. It is the highest for Cu-10Zn and the lowest for Cu-30Zn alloy. Under potentiostatic control the dissolution mechanism depends on the electrode potential and changes from exclusive dissolution of zinc to simultaneous dissolution of both components with preferential dissolution of zinc. The latter decreases, as the electrode potential becomes more positive.