On-line solid-phase extraction of large-volume injections coupled to liquid chromatography-tandem mass spectrometry for the quantitation and confirmation of 14 selected trace organic contaminants in drinking and surface water

We describe the development and validation of an on-line solid-phase extraction of large-volume injections coupled to liquid chromatography-tandem mass spectrometry method for the simultaneous quantitation and confirmation of 14 selected trace organic contaminants in drinking and surface water. Selected compounds were: anti-infectives (clarithromycin, sulfamethoxazole and trimethoprim), an anticonvulsant (carbamazepine) and its transformation product 10,11-dihydrocarbamazepine, an antihypertensive (enalapril), antineoplastics (cyclophosphamide and methotrexate), herbicides (atrazine, cyanazine, and simazine) and two of their transformation products (deethylatrazine and deisopropylatrazine) and an antiseptic (triclocarban). The breakthrough volume determinations showed that out of all the investigated sorbents, the Strata-X on-line solid-phase extraction column showed the best performance. The method used a load volume of 10.0 mL and was validated using the corresponding matrices, yielding for most compounds, R² > 0.99. Extraction recoveries ranged from 60 to 109%. The intra- and inter-day precision were <14 and <16%, respectively. The method detection limits ranged from 0.6 to 6 ng L⁻¹. Matrix effects were in general low. The performance of the on-line method was demonstrated with the analysis of real water samples. The application of alternative techniques of confirmation was also explored using accurate mass measurements on a time-of-flight mass spectrometer and the data-dependent reverse energy ramp scan on a triple quadrupole.     

Convexification, Concavification and Monotonization in Global Optimization

We show in this paper that via certain convexification, concavification and monotonization schemes a nonconvex optimization problem over a simplex can be always converted into an equivalent better-structured nonconvex optimization problem, e.g., a concave optimization problem or a D.C. programming problem, thus facilitating the search of a global optimum by using the existing methods in concave minimization and D.C. programming. We first prove that a monotone optimization problem (with a monotone objective function and monotone constraints) can be transformed into a concave minimization problem over a convex set or a D.C. programming problem via pth power transformation. We then prove that a class of nonconvex minimization problems can be always reduced to a monotone optimization problem, thus a concave minimization problem or a D.C. programming problem.     

A model for expansion ratio in liquid-solid fluidized beds

Liquid-solid fluidized beds are used in mineral processing industries to separate particles based on parti- cle size, density, and shape. Understanding the expanded fluidized bed is vital for accurately assessing its performance. Expansion characteristics of the fluidized bed were studied by performing several experi- ments with iron ore, chromite, quartz, and coal samples. Using water as liquid medium, experiments were conducted to study the effects of particle size, particle density, and superficial velocity on fluidized bed expansion. The experimental data were utilized to develop an empirical mathematical model based on dimensional analysis to estimate the expansion ratio of the fluidized bed in terms of particle character- istics, operating and design parameters. The predicted expansion ratio obtained from the mathematical model is in good agreement with the experimental data.     

PHYTOCHROME CONTROL OF DEGREENING OF ATTACHED COTYLEDONS and PRIMARY LEAVES OF MUSTARD (SINAPIS ALBA L.) SEEDLINGS*

Abstract— Mustard ( Sinapis alba L.) seedlings were grown on moistened vermiculite without added nutrients for 17 days in medium white light (4.6 lx). During this period cotyledons as well as primary leaves expressed signs of senescence as defined by the loss of chlorophyll(ide) a ('degreening'). While degreening was detectable 9 days after sowing in the cotyledons it was not measurable before 15 days after sowing in the primary leaves. Phytochrome retards the loss of chlorophyll(ide) a in both organs; however, it does not change the temporal pattern of greening and degreening.     

Tuning percolation speed in layer-by-layer assembled polyaniline�Cnanocellulose composite films

Polyaniline of low molecular weight (ca. 10?kDa) is combined with cellulose nanofibrils (sisal, 4?C5?nm average cross-sectional edge length, with surface sulphate ester groups) in an electrostatic layer-by-layer deposition process to form thin nano-composite films on tin-doped indium oxide (ITO) substrates. AFM analysis suggests a growth in thickness of ca. 4?nm per layer. Stable and strongly adhering films are formed with thickness-dependent coloration. Electrochemical measurements in aqueous H₂SO₄ confirm the presence of two prominent redox waves consistent with polaron and bipolaron formation processes in the polyaniline?Cnanocellulose composite. Measurements with a polyaniline?Cnanocellulose film applied across an ITO junction (a 700?nm gap produced by ion beam milling) suggest a jump in electrical conductivity at ca. 0.2?V vs. SCE and a propagation rate (or percolation speed) two orders of magnitude slower compared to that observed in pure polyaniline This effect allows tuning of the propagation rate based on the nanostructure architecture. Film thickness-dependent electrocatalysis is observed for the oxidation of hydroquinone.     

NMR parameters in alkali, alkaline earth and rare earth fluorides from first principle calculations

(19)F isotropic chemical shifts for alkali, alkaline earth and rare earth of column 3 basic fluorides are measured and the corresponding isotropic chemical shieldings are calculated using the GIPAW method. When using the PBE exchange-correlation functional for the treatment of the cationic localized empty orbitals of Ca(2+), Sc(3+) (3d) and La(3+) (4f), a correction is needed to accurately calculate (19)F chemical shieldings. We show that the correlation between experimental isotropic chemical shifts and calculated isotropic chemical shieldings established for the studied compounds allows us to predict (19)F NMR spectra of crystalline compounds with a relatively good accuracy. In addition, we experimentally determine the quadrupolar parameters of (25)Mg in MgF(2) and calculate the electric field gradients of (25)Mg in MgF(2) and (139)La in LaF(3) using both PAW and LAPW methods. The orientation of the EFG components in the crystallographic frame, provided by DFT calculations, is analysed in terms of electron densities. It is shown that consideration of the quadrupolar charge deformation is essential for the analysis of slightly distorted environments or highly irregular polyhedra.     

Electrodeposition of manganese dioxide: effect of quaternary amines

The effect of quaternary ammonium salts (tetraethyl ammonium bromide, tetrapropyl ammonium bromide, and tetrabutyl ammonium bromide) on the structural, morphological, and electrochemical characteristics of electrolytic manganese dioxide (EMD) obtained from acidic aqueous sulfate solution has been investigated. Physical characterization of the EMD was achieved by X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, differential thermal analysis, and Fourier transform infrared spectroscopy. The charge–discharge profile of the materials was determined to evaluate their potential for alkaline battery applications. The presence of these quaternary ammonium salts as organic additives in the solution increased the current efficiency while decreasing energy consumption during electrochemical deposition of manganese dioxide (MnO₂). All the additives influenced the discharge characteristics of the EMD samples significantly, producing a cathode material with increased cumulative discharge capacity relative to EMD prepared in the absence of additives. This is attributed to the ability of the additives to affect the particle size and morphology, and therefore electrochemical activity, of electrodeposited materials; the effects in the case of the additives investigated in this work were positive, producing a material with potential application to battery technology.     

Post-Synthetic Modification of Zr-based Metal-Organic Frameworks with Imidazole: Variable Optical Behavior and Sensing

UiO-66-NH₂-IM, a fluorescent metal-organic framework (MOF), was synthesized by post-synthetic modification of UiO-66-NH₂ with 2-imidazole carboxaldehyde via a Schiff base reaction. It was examined using various characterization techniques (PXRD, FTIR, NMR, SEM, TGA, UV-Vis DRS, and photoluminescence spectroscopy). The emissive feature of UiO-66-NH₂-IM was utilized to detect volatile organic compounds (VOCs), metal ions, and anions, such as acetone, Fe³⁺, and carbonate (CO₃²⁻). Acetone turns off the high luminescence of UiO-66-NH₂-IM in DMSO, with the limit of detection (LOD) being 3.6 ppm. Similarly, Fe³⁺ in an aqueous medium is detected at LOD=0.67 μM (0.04 ppm) via quenching. On the contrary, CO₃²⁻ in an aqueous medium significantly enhances the luminescence of UiO-66-NH₂-IM, which is detected with extremely high sensitivity (LOD=1.16 μM, i. e., 0.07 ppm). Large Stern-Volmer constant, K_sv, and low LOD values indicate excellent sensitivity of the post-synthetic MOF. Experimental data supported by density functional theory (DFT) calculations discern photo-induced electron transfer (PET), resonance energy transfer (RET), inner filter effect (IFE), or proton abstraction as putative sensing mechanisms. NMR and computational studies propose a proton abstraction mechanism for luminescence enhancement with CO₃²⁻. Moreover, the optical behavior of the post-synthetic material toward analytes is recyclable.