Laser Doppler vibrometer for real-time speech-signal acquirement

Laser Doppler vibrometer （LDV） has a potential application prospect in remote sensing. Based on the correlation theories of heterodyne detection, a LDV system with a configuration of all fiber and heterodyne techniques is developed to detect the sound signal through the vibration of glass. Experimental results show that the LDV system has an ability to acquire the real-time speech signal 25 m away through glass. While, the system signal-to-noise ratio （SNR） value decreases with the increase of the glass thickness and the detection distance.     

A biosynthetic route to photoclick chemistry on proteins

Light-induced chemical reactions exist in nature, regulating many important cellular and organismal functions, e.g., photosensing in prokaryotes and vision formation in mammals. Here, we report the genetic incorporation of a photoreactive unnatural amino acid, p-(2-tetrazole)phenylalanine (p-Tpa), into myoglobin site-specifically in E. coli by evolving an orthogonal tRNA/aminoacyl-tRNA synthetase pair and the use of p-Tpa as a bioorthogonal chemical "handle" for fluorescent labeling of p-Tpa-encoded myoglobin via the photoclick reaction. Moreover, we elucidated the structural basis for the biosynthetic incorporation of p-Tpa into proteins by solving the X-ray structure of p-Tpa-specific aminoacyl-tRNA synthetase in complex with p-Tpa. The genetic encoding of this photoreactive amino acid should make it possible in the future to photoregulate protein function in living systems.     

Attapulgite modified with 2-hydroxy-1-naphthaldehyde as selective solid-phase extractant for determination of copper(II) in environmental samples by ICP-OES

Attapulgite modified with 2-hydroxy-1-naphthaldehyde was prepared and applied to the separation, preconcentration and determination of Cu(II) in aqueous solutions by inductively coupled plasma optical emission spectrometry. Experimental conditions for effective adsorption of trace levels of Cu(II) were optimized using batch and column procedures. The optimum pH value for the separation of Cu(II) on the newly sorbent was 4.0 and complete elution of Cu(II) from the sorbent surface was carried out using 2 mL of 0.01 mol L^?1 HCl. The adsorption capacity for Cu(II) was 25.13 mg g^?1. The detection limits of the method defined by IUPAC were found to be 0.24 μg L^?1 with enrichment factor of 150. The method has been applied to the determination of Cu(II) in certified reference materials and natural water samples with satisfactory results.     

固相萃取-高效液相法测定炒货食品及坚果制品中的多种抗氧化剂

运用固相萃取和高效液相色谱技术,建立炒货食品及坚果制品中丁基羟基茴香醚(BHA)、二丁基羟基甲苯(BHT)、叔丁基对苯二酚(TBHQ)、没食子酸丙酯(PG)等人工合成的抗氧化剂和茶多酚、甘草抗氧化物、迷迭香提取物等天然抗氧化剂的测定方法。样品经甲醇、异丙醇、乙腈等混合溶剂提取,冷冻离心后经C18柱固相萃取净化,用高效液相色谱检测。各抗氧化剂残留量在6~100 mg/L范围内呈良好线性关系,加标回收率为80%~106%。     

Electrochemical synthesis of CdS/ZnO nanotube arrays with excellent photoelectrochemical properties

A facile electrochemical method was developed to synthesize CdS/ZnO nanotube arrays. Implemented as the photoanode in a photoelectrochemical cell, the CdS/ZnO nanotube arrays exhibited a photocurrent as high as 10.64 mA cm(-2).     

Nitrogen‐Rich Energetic Monoanionic Salts of 3,4‐Bis(1 H‐5‐tetrazolyl)furoxan

3,4‐Bis(1H‐5‐tetrazolyl)furoxan (H₂BTF, 2 ) and its monoanionic salts that contain nitrogen‐rich cations were readily synthesized and fully characterized by multinuclear NMR (¹H, ¹³C) and IR spectroscopy, differential scanning calorimetry (DSC), and elemental analyses. Hydrazinium ( 3 ) and 4‐amino‐1,2,4‐triazolium ( 7 ) salts crystallized in the monoclinic space group P2(1)/n and have calculated densities of 1.820 and 1.764 g cm^?3, respectively. The densities of the energetic salts range between 1.63 and 1.79 g cm^?3, as measured by a gas pycnometer. Detonation pressures and detonation velocities were calculated to be 23.1–32.5 GPa and 7740–8790 m s^?1, respectively.     

气相色谱-离子阱质谱联用测定玩具中21种致敏性芳香剂

建立了气相色谱-离子阱质谱联用测定布绒、贴纸和塑料玩具中苯甲醇等21种致敏性芳香剂的方法。对于布绒和贴纸玩具样品,采用丙酮超声振荡提取20 min后过0.45 μm滤膜,经HP-1MS色谱柱(50 m×0.2 mm×0.5 μm)分离,离子阱质谱检测。对于塑料玩具样品,采取溶解-沉淀方式提取,经Envi-carb石墨化碳固相萃取小柱净化,旋蒸、氮吹浓缩,过0.45 μm滤膜后进行测定,外标法定量。方法对不同物质的定量限(LOQ)为0.02～40 mg/kg,线性范围为0.002～50 mg/L,低、中、高3个添加水平的平均回收率为82.2%～110.8%,相对标准偏差(RSD)为0.6%～10.5%。该方法准确、灵敏,可用于玩具中苯甲醇等21种致敏性芳香剂含量的检测。     

基于深度学习的红外目标成像液位检测方法

容器液位检测是工业生产及化工原料储存、运输过程中的重要环节,针对现有液位检测技术中传感器布置容易受空间限制,在高温高压、灰尘、潮湿等特殊环境下传感器寿命短等问题,提出了一种基于深度学习的红外目标成像液位检测方法.通过对容器红外图像标注数据集进行优化训练,得到可以准确识别容器内液体百分比含量的模型.首先,构建储罐液位标准数据集,并搭建基于Pytorch的深度学习目标检测框架.然后,在输入端对图像进行数据增强,调整模型的宽度和深度,优化训练检测模型.最后,采用特征金字塔网络和路径聚合网络结构融合不同尺寸特征图的特征信息,用联合交并比计算边界框的回归损失,并在后处理过程中引入加权非极大值抑制.实验结果表明,该模型具有较好的鲁棒性和识别效果,在交并比为0.5时的平均精度均值可达到0.804.     

Oxidation pattern of small silicon oxide clusters: structures and stability of Si6On (n = 1-12)

We have performed systematic ab initio calculations to study the structures and stability of Si(6)O(n)() clusters (n = 1-12) in order to understand the oxidation process in silicon systems. Our calculation results show that oxidation pattern of the small silicon cluster, with continuous addition of O atoms, extends from one side to the entire Si cluster. Si atoms are found to be separated from the pure Si cluster one-by-one by insertion of oxygen into the Si-O bonds. From fragmentation energy analyses, it is found that the Si-rich clusters usually dissociate into a smaller pure Si clusters (Si(5), Si(4), Si(3), or Si(2)), plus oxide fragments such as SiO, Si(2)O(2), Si(3)O(3), Si(3)O(4), and Si(4)O(5). We have also studied the structures of the ionic Si(6)O(n)(+/-) (n = 1-12) clusters and found that most of ionic clusters have different lowest-energy structures in comparison with the neutral clusters. Our calculation results suggest that transformation Si(6)O(n)+(a) + O --> Si(6)O(n+1)+(a) should be easier.     

Linearly polarized emission of an organic semiconductor nanobelt

Linearly polarized emission has been observed for the nanobelts fabricated from a perylene diimide molecule through both solution-based and surface-supported self-assembling. The measurement of polarized emission was performed over single nanobelts with use of a near-field scanning optical microscope (NSOM) adapted with emission polarization (by putting a planar polarizer before the detector). Rotating the emission polarizer (from 0 degrees to 180 degrees) changed the emission intensity in a way depending on the relative angle between the long axis of the belt and the polarizer with a minimum of intensity detected at ca. 78 degrees, which is indicative of the tilted stacking of molecules along the belt direction.