High-efficiency deflection of high-energy protons through axial channeling in a bent crystal

Beam deflection due to axial channeling in a silicon crystal bent along the 111 axis was observed with 400 GeV/c protons at the CERN Super Proton Synchrotron. The condition for doughnut scattering of protons by the atomic strings of the crystal was attained. Such a condition allowed one to observe a beam deflection of 50 murad with about 30% efficiency. The contribution of hyperchanneled states of protons to the observed beam deflection was less than 2% according to simulation results.     

Protection of carbon steel with superhydrophobic coating against corrosion in NaCl solution

Corrosion and kinetics of partial electrode reactions on carbon steel St3 with superhydrophobic coatings of three types were studied in 0.5 M NaCl and 50 g/L NaCl +400 mg/L H₂S solutions. The investigations were carried out on electrodes made of carbon steel St3 with a chemical composition, wt. %: C – 0.20; Mn – 0.50; Si – 0.15; P – 0.04; S – 0.05; Cr – 0.30; Ni – 0.20; Cu – 0.20, and Fe – 98.36. To obtain the type I coating, the metal surface was textured by an IR laser radiation of nanosecond duration followed by chemisorption of fluorobutylsilane out of a solution in n-decane. To obtain a coating of type II, a nanoscale composite layer consisting of aggregates of aerosil nanoparticles was applied additionally to the outcome of type I method. To obtain a coating of type III, the metal surface after being textured by the infrared (IR) laser radiation of nanosecond duration was followed by chemisorption of fluoroxy silane. The influence of duration τ of the medium corrosive impact on protective effect of the superhydrophobic coating is considered. It was shown that upon reaching a steady state (after 72 h), the corrosion rate of steel with a superhydrophobic coating of I and II types in a 0.5 M NaCl solution is reduced by 23 ± 3 times compared with unprotected samples. Approximately the same picture is characteristic of electrodes with a coating of type III in a solution of 50 g/L NaCl +400 mg/L H₂S.     

In-Electrospray source Hydrogen/Deuterium exchange coupled to multistage fragmentation for the investigation of the protonation and fragmentation pathways of gas phase ions

Identification of molecules in complex natural matrices relies on matching the fragmentation spectra of ions under investigation and the spectra acquired for the corresponding analytical standards. Currently, there are many databases of experimentally measured tandem mass spectrometry spectra (such as NIST, MzCloud, and Metlin), and considerable progress has been made in the development of software for predicting tandem mass spectrometry fragments in silico using combinatorial, machine learning, and quantum chemistry approaches (such as MetFrag, CFM-ID, and QCxMS). However, the electrospray ionization molecules can be ionized at different sites (protonated or deprotonated), and the fragmentation spectra of such ions are different. Here, we are using the combination of the in-ESI source hydrogen/deuterium exchange reaction and MSⁿ fragmentation for the investigation of the fragmentation pathways for different protomers of organic molecules. It is shown that the distribution of the deuterium in the fragment ions reflects the presence of different protomers. For several molecules, the distribution of deuterium was traced up to the MS⁵ level of fragmentation revealing many unusual and unexpected effects. For example, we investigated the loss of HF from the ciprofloxacin and norfloxacin ions and observed that for ions protonated at –COOH group, the eliminating hydrogen always comes from –NH group. When ions are protonated at another site, the elimination of hydrogen with a probability of 30% occurs from the –NH group, and with a probability of 70%, it originates from other sites on the molecule. Such effects were not described previously. Quantum chemical simulation was used for the verification of the protonated structures and simulation of the corresponding fragmentation spectra.     

Spirophosphoranes and Polycyclic Hexacoordinated Phosphorus Derivatives in the Phosphorylation Reactions of Bis(O-Hydroxyaryl)Diimines

Abstract

A new approach to the synthesis of spirophosphoranes was developed. It is based on the reaction of hexamethyltriamidophosphite with bis(o-hydroxyaryl)diimines.     

Phase relationships in the pseudo-binary 2(ZnTe)-CuInTe2 system

Subsolidus phase relationships in the 2(ZnTe)_x(CuInTe₂)_1−x system were investigated by TEM experiments combined with EDX analysis. The samples were prepared by the solid-state reaction of the elements during long annealing times, followed by either quenching in ice-cold water, or by controlled cooling at different rates. Using the chemical compositions of single and coexisting phases at various temperatures, the boundaries of the two-phase region have been determined. At room temperature, the two-phase region extends from x=0.10 to 0.31. For x<0.10 only mixed crystals with tetragonal structure exist. Between x=0.31 and 1 alloys with the cubic structure are stable.The morphology of the tetragonal domains and their orientation relationship to the cubic matrix were determined by SAD, TEM and HRTEM experiments. The tetragonal phase embedded within the cubic matrix has a flat ellipsoidal shape, whose short axis coincides with the tetragonal c-axis. The three topotaxial orientation relationships between the tetragonal domains and the surrounding cubic matrix were found to be: [001]_tetr.∥[100]_cub., [001]_tetr.∥[010]_cub. and [001]_tetr.∥[001]_cub.. There is an indication that the nucleation starts from small regions displaying cation ordering according to the CuPt-type structure. Reaching the two-phase equilibrium, the tetragonal domains as well as the surrounding cubic phase are free of this cation ordering.     

On Nuclearly Nilpotent Loops of Finite Exponent

We show that the restricted Burnside problem has a positive answer for suitable classes of nuclearly nilpotent loops. Using this technique we give a positive answer to the restricted Burnside problem for Moufang A-loops.     

Quality of electron probe X-ray microanalysis determinations obtained from laboratory reference materials of the coppery alloys and basaltic glasses

Nine coppery alloys and five basaltic glasses have been quantitatively evaluated as the reference materials to employ in electron probe X-ray microanalysis. The optimum conditions for measurements were selected considering the dependence of intensity and detection limit on the conditions of the X-ray radiation excitation and analytical signal recording. The homogeneity of basaltic glasses and coppery alloys has been examined. The dependence of electron probe X-ray microanalysis accuracy on the homogeneity of reference materials was studied in the reference materials of coppery alloys.Six data sets comprising the average concentrations, standard deviations, relative standard deviations, confidence interval and the z-score of data quality were calculated for 50 control samples: 10 alloys, 14 glasses, 2 metals, 24 minerals and oxides. The average compositions of every control sample were derived in 8–16 analyses. The measured values were corrected for matrix effects applying the original program. These series of concentrations have been compared with each other and with the certified/recommended values using 2-pair selective Student's t-test.The results gained from both laboratory reference materials and certified glass reference materials show comparable accuracy. The quality of all available results complies with the “applied geochemistry” category of performance (2nd category). The laboratory reference materials give comparable accuracy to certified reference materials and can be used for calibrating microprobe techniques, as well as data quality control. The application of laboratory reference materials in microanalysis of silicate minerals and coppery alloys allows reliable analytical data to be acquired. The applications in mineralogy and metallurgy can be extended successfully to the targets when certified reference materials are not available.