三维格子Boltzmann方法研究上升双气泡的运动特性

应用格子Boltzmann三维模型，对双气泡在静水中的运动进行数值研究.采用八点差分和十八点差分格式分别求解一阶▽φ和二阶▽²φ可以有效避免气液密度比过大造成的数值不稳定问题.结果表明：当两个相同直径的气泡在上升时，位置靠上的气泡形状变化像单气泡上升一样，而位置靠下的气泡会受到前一个气泡尾迹的影响，并有很明显的形状变化.当两个气泡直径不同时，不管初始位置如何，大气泡总会对小气泡造成强烈的影响.     

Controllably asymmetric beam splitting via gap-induced diffraction channel transition in dual-layer binary metagratings

In this work, we designed and studied a feasible dual-layer binary metagrating, which can realize controllable asymmetric transmission and beam splitting with nearly perfect performance. Owing to ingenious geometry configuration, only one meta-atom is required to design for the metagrating system. By simply controlling air gap between dual-layer metagratings, high-efficiency beam splitting can be well switched from asymmetric transmission to symmetric transmission. The working principle lies on gap-induced diffraction channel transition for incident waves from opposite directions. The asymmetric/symmetric transmission can work in a certain frequency band and a wide incident range. Compared with previous methods using acoustic metasurfaces, our approach has the advantages of simple design and tunable property and shows promise for applications in wavefront manipulation, noise control and one-way propagation.     

基于石墨烯/石墨烯卷轴复合薄膜高灵敏度柔性压力传感器

一维导电材料例如纳米线,大量应用于柔性压力传感器中. 但是一维材料和基底之间接触时相互作用力较弱,使得传感器灵敏度、响应时间、和循环寿命等性能指标有待进一步提高. 针对这些问题,设计了石墨烯/石墨烯卷轴多分子层复合薄膜作为传感器导电层. 石墨烯卷轴具有一维结构,而石墨烯的二维结构可以牢固地固定卷轴,以确保高导电性复合薄膜与基底之间的粘附性,同时整体结构的导电通道得到了增加. 由于一维和二维结构的协同效应,实现了应变灵敏度系数3.5 kPa^-1、 响应时间小于50 ms、能够稳定工作1000次以上的压阻传感器.     

OCS经由F 31Π里德堡态生成CO(X1Σ+)+S(1D2)产物的波长相关性光解离

本文利用时间切片离子速度成像技术在134∽140 nm波段研究了OCS分子经由F 3¹Π里德堡态的真空紫外光解离动力学. 在选取的5个分别对应OCS(F 3¹Π, v₁=0∽4)的伸缩振动激发的光解波长,实验测得了来自CO(X¹Σ⁺)+S(¹D₂)产物通道的SS(¹D₂))实验影像,并获得了总平动能谱和CO(X¹Σ⁺, v)共生产物的振动布居及角分布. 结果分析表明OCS分子解离生成CO(X¹Σ⁺)+S(¹D₂)产物的过程经历了上态F 3¹Π 与C_?v和C_s构型的下电子态间非绝热耦合过程. 实验结果显示了很强的波长相关性：OCS (F 3¹Π, v₁)的较低转动激发态(v₁=0∽2)和较高转动激发态(v₁=3, 4)的CO(X¹Σ⁺)产物的振动布居和角分布具有显著差异,表明该解离过程中具有不同的解离机理. 本结果提供了振动耦合可能对真空紫外光解离动力学产生关键作用的相关证据.     

工质对微通道沸腾液膜瞬态变化的影响

本文采用去离子水和无水乙醇两种工质,利用微通道流动沸腾同步测量实验系统,研究了液膜厚度的瞬态变化规律,实验发现流动沸腾形成的初始液膜厚度在毛细数Ca很宽的范围内都遵循Taylor流动原理;液膜形成后,在蒸发和蒸汽流动携带的耦合作用下,厚度迅速减薄直至蒸干;由于水的汽液黏度比小,速度梯度小,剪切作用带来的液膜厚度减少量小,且水的汽化潜热大,吸收相同热量时蒸发量小,导致水的液膜厚度变化斜率较小,通过理论分析提出了沸腾液膜厚度变化的计算模型,计算结果与实验结果的误差小于20%。     

Structural phase transitions in Pd0.8 Si0.2 and Pd0.75 Si0.20 Ag0.05 alloys observed by pac

The phase transition in the alloys Pd_0.8 Si_0.2 and Pd_0.75 Si_0.20 Ag_0.05 have been investigated through the quadrupole interaction of¹¹¹Cd impurities. The quadrupole interactions were measured by means of the TDPAC technique from room temperature up to about 870 K. The variation of the quadrupole interaction with temperature in the alloy PdSiAg shows aT ^3/2 dependence below and above 629 K, with coefficientsB=5.43(25)·10⁻⁵ K^−3/2 andB=3.70(15)·10⁻⁵ K^−3/2, respectively. This demonstrates that the alloy undergoes a phase transition around 629 K. The existence of two electric field gradients observed in the alloy PdSi,V _zz (1)=3.47(54)·10¹⁷ V/cm² andV _zz (2)=2.29(36)·10¹⁷ V/cm², indicates that there are two different¹¹¹Cd sites. The corresponding fractionsf ₁ andf ₂ strongly depend on temperature. Below 520 K, most¹¹¹Cd nuclei are subject to the higher EFGV _zz (1) (f ₁≈70%), whereas above 520 Kf ₁ falls rapidly to zero andV _zz (2) becomes dominant. The temperature dependences of thef ₁ andf ₂ reveal a picture of the phase transition between the two crystal structures.     

低速风洞微机控制闭环调速

本文提出一种用于调节低速风洞流速的测量及控制系统。该系统以微计算机为核心,不断采集风洞实验段的流速数据,并根据测量结果与指定值的比较去调节和控制风洞的电机转速,使风洞能准确地按指定风速运行或按予定的程序升速或降速,实现了低速风洞的闭环自动调速。本文给出了该系统的构成原理和性能实验结果。测试结果表明,本系统的超调量小于5％,稳态误差小于0.3％,调节时间小于50秒。     

Dual-parameter elastic-plastic fracture criterion of metals and alloys in the plane strain case

In recent years, some investigators discussed the applicability of the HRR theory for engineering materials based on the results of numerical analyses and experimental studies. In the present paper, the finite element method is employed to analyze the crack tip fields of the engineering elastic-plastic material with a variety of geometry configurations of cracked specimens from elastic state to intensely general yielded state in the plane strain case. The results indicate that the HRR theory loses its validity of application for engineering elastic-plastic materials in the plane strain case. The reasons for this are analyzed. A dual-parameter fracture criterion is suggested for this case.