空间激光通信中光强起伏尺度特征的数值分析

利用数值模拟的方法,定量地计算分析了空间激光通信中光强起伏问题,得到了准直光束与聚焦光束光强起伏相关距离（不均匀元半径）随大气相十长度变化的结果;进而分别从接收效率和性价比等不同的角度对激光通信系统接收孔径选取的参考因素进行了探讨。根据现代光通信对误码率的最低要求定义最佳接收孔径,计算分析了聚焦光束空间激光通信系统最佳接收孔径随大气相干长度r0的变化关系。结果表明,最佳接收孔径随大气相干长度的减小而迅速增大。对于聚集光束空间激光通信而言,在大气相干长度ro约为4cm的强湍流效应情况下,通信系统的接收孔径接近5倍艾里斑直径,才能满足国际电信联盟-电信标准部对光通信的最低要求。     

用于光纤拉曼放大器抽运源的单级光纤拉曼激光器

抽运光源是光纤拉曼放大器应用于密集波分复用系统的关键技术,设计了一种紧凑型的808nm激光二极管抽运的基于钒酸钇（Nd^3＋：YVO4）晶体1342nm固体激光器模块,提出利用上述1342nm固体激光器抽运基于光纤光栅的单级全光纤型拉曼谐振器获得1．4μm激光输出的光纤拉曼激光器,分析了固体激光器的阈值特性、性能优化方法和单级光纤拉曼谐振器的设计方法。上述1342nm固体激光器模块在抽运功率2W时获得了最大655mW的激光输出功率和42．6％的斜率效率,单级拉曼谐振器的1342nm到1．4μm光功率转换斜率效率达75％,在1425nm、1438nm、1455nm和1490nm处的输出功率达到300mW以上。最后给出基于1．4μm光纤拉曼激光器抽运的宽带平坦放大的光纤拉曼放大器的结构参量和性能测试结果。     

色散平坦渐减光纤中色散特性对超连续谱的影响

从频域全场方程出发研究了色散平坦渐减光纤中超连续谱(SC)的产生。结果表明,色散平坦渐减光纤的初始色散和色散斜率对超连续谱的产生有重要影响,当超连续谱宽度小于某一特定阈值时,谱宽随初始色散或色散斜率显著变化;而当超连续谱谱宽大于此值以后,谱宽随这两个参量的变化较缓慢。并且发现色散递减曲线为凸型的光纤比色散线性递减的光纤更有利于产生宽的超连续谱;而色散递减曲线为凹型的光纤不利于形成宽的超连续谱。计算表明经过优化选择光纤的色散参量,可以得到谱宽达330nm的超连续谱。     

径向双折射滤波器的超分辨性能研究

超分辨技术因其可以超越经典的衍射极限而为人们所熟知．并且．在光存储和共焦扫描成像系统中有着广泛的应用。把由两个偏振器和一个圆对称的双折射元件组成的径向双折射滤波器引入超分辨技术,借助琼斯算法推导出其光瞳函数的表达式。由分析得出通过改变径向双折射滤波器中偏振器的偏振方向和双折射元件的主轴之间的夹角,即可实现光学系统的横向超分辨或轴向超分辨。同时对评价该器件超分辨性能的参量第一零点比、斯特尔比和旁瓣强度抑制比做了详细的讨论。该滤波器用于超分辨技术的优点在于其制作不涉及相位的变化而比较简单,且费用比较低。缺点是旁瓣能量过高,但可以通过采用共焦系统来抑制。     

介质膜滤波器色散特性的研究

采用信号处理的方法,对介质膜滤波器的滤波特性进行了详细的研究。介质膜滤波器是最小相位滤波器,它的幅度响应与相位响应之间存在希尔伯特变换规律,因此可以通过它的幅度响应重构它的相位响应,进而可以得到它的色散特性。为了验证理论分析,设计了射频调制法测试介质膜滤波器群速度延时的实验装置。实验测试了一个100GHz33信道的介质膜滤波器的群速度延迟。通过对实验结果与理论计算结果的对比分析,发现实验数据与理论分析吻合得比较好。最后,对介质膜滤波器的色散的特点进行了分析。     

基于光外差技术的超宽带频率响应测量系统

介绍了一种利用光外差技术测量光电探测器超宽带频率响应的测试方法。将一个可调谐外腔激光器和一个固定波长的分布反馈激光器（DFB-LD’s）产生的激光输入到光电探测器进行混频。通过对可调激光器腔长的控制,可以在光电探测器产生从DC到上百GHz的拍频信号,在无需额外校准光源的情况下就可以进行光电探测器超宽带频率响应特性的测试,这是该方法最突出的优点。实验证明该方法比较准确、简便、易于操作。在实验中,对两个不同的InGaAs p-i—n探测器进行测量,得到器件的3dB带宽分别为14．4GHz和40GHz。该测量方法对同类实验的研究和应用都具有实用意义。     

含纳米棒银溶胶的制备及其光谱性质研究

以CTAB表面活性剂胶束为模板用化学还原法制备出含有银纳米棒的银胶体,用透射电镜(TEM)对颗 粒形貌进行了表征.UV Vis吸收谱显示,含银纳米棒溶胶有两个吸收蜂,其中长波长吸收峰位置随胶粒长径比增 加迅速红移和宽化.用多尺寸统计平均的Mie散射模型计算了纳米棒银胶体的吸收谱,较好地解释了长波长吸收 峰的宽化.以此胶体为衬底材料,测量了染料分子的表面增强拉曼散射(SERS),结果显示,SERS强度随胶体中 所含纳米棒长径比的增加呈现先显著增强后缓慢减弱的变化规律,用电磁增强理论对有关现象进行了分析.     

Experimental verification of anticipated and retarded synchronization in chaotic semiconductor lasers

Experimental observation of both anticipated and retarded synchronization is demonstrated using unidirectionally coupled semiconductor lasers with delayed optoelectronic feedback. Depending on the difference between the transmission time and the feedback delay time, the lasers fall into either the anticipated or the retarded synchronization regime, where the driven receiver laser leads or lags behind the driving transmitter laser. The two regimes are observed to have the same stability of chaos synchronization in the presence of small perturbations by noise and parameter mismatches. In both regimes the observed time shift between the synchronized chaotic waveforms is found to be equal to the difference between the transmission time and the feedback delay time.     

Effect of ion impinging on the microstructure and field emission of carbon nanotubes

Effects of ion impinging on the microstructure and field electron emission properties of screen-printed carbon nanotube films were investigated. We observed that the plasma treatment modified the microstructure of CNTs along with the remarkable increase of emission site density. With the prolongation of ion impinging time, the emission current falls down first, and then rises up to higher than that of the untreated films. It is proposed that the change of emission characteristics is due to the different emission mechanisms. After the treatment, electrons are emitted predominantly from the nano-nodes on the tube wall instead from the nanotube tips.     

Surface free energies of electroless Ni–P based composite coatings

Surface free energy of a solid surface gives a direct measure of intermolecular interactions at interfaces and has a strong influence on adsorption and adhesion behaviour. However few data are available for the surface free energies of electroless Ni–P based composition coatings. In this paper, the electroless Ni–P, Ni–P-surfactant, Ni–Cu–P, Ni–P–PTFE and Ni–Cu–P–PTFE composite coatings were prepared under various coating conditions. The chemical compositions, surface morphology and thickness of the coatings were measured using an energy dispersive X-ray microanalysis (EDX), a scanning electron microscope (SEM) and a digital micrometer respectively. The contact angles of water, diiodomethane and ethylene glycol on the coatings were measured automatically using dataphysics OCA-20 contact angle analyser. The surface free energy of the coatings and their components (e.g. dispersion, polar or acid/base portions) were calculated using various methods. The experimental results showed that the incorporation of surfactant or PTFE particles into Ni–P matrixes has a significant influence on the surface free energy of the coatings, while the incorporation of copper into Ni–P matrixes has no significant influence on the surface free energy of the coatings.