Approximation of solutions of operator-differential equations by operator polynomials

We prove theorems that characterize the classes of functions whose best approximations by algebraic polynomials tend to zero with given order. We construct approximations of solutions of operator-differential equations by polynomials in the inverse operator. Translated from Ukrainskii Matematicheskii Zhurnal, Vol. 50, No. 11, pp. 1506–1516, November, 1998.     

Asymptotic behavior of neutron small-angle multiple scattering spectra

The asymptotic behavior of the spectra for large values of the scattering vector for the case of elastic multiple small-angle neutron scattering (SANS) is investigated theoretically and experimentally. An expansion of the spectrum in terms of the reciprocal of the magnitude of the momentum transfer is obtained taking account of the influence of the instrumental line. It is shown that, to within some factor, the leading term of the expansion is identical to the differential single-scattering cross section averaged over a statistical ensemble of particles; several subsequent terms in the expansion are calculated and the range of applicability of the resulting expressions is determined. The asymptotic behavior of the multiple SANS spectrum is measured, using a two-crystal neutron spectrometer, for samples of an HTSC ceramic, the alloy Fe-Ni, and Al powder. The agreement between the experimental results and the theoretical predictions is analyzed. Zh. éksp. Teor. Fiz. 114, 2194–2203 (December 1998)     

Distinctive features of time-resolved photoluminescence of porous silicon coated with a layer of diamondlike carbon

Time-resolved photoluminescence from porous silicon coated with a diamondlike carbon film is investigated. The intensity of the photoluminescence from the carbon film is obserd to increase after deposition, and there is an accompanying change in the intensity and a shortwavelength shift of the photoluminescence band of porous silicon that depends on the porosity of its original layers. These changes are explained by the formation of carbon nanoclusters on the surface of the silicon filaments. Zh. Tekh. Fiz. 68, 83–87 (April 1998)     

A remark on the mild solutions of non-local evolution equations

We provide a counterexample to some recent publications concerning the existence of the mild solutions of the non-local evolution equations, and indicate that in the study of the non-local evolution equations, the operators from which the mild solutions may be derived are in general not compact, thus those fixed point theorems requiring the compactness of the operators are not applicable.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

On the effect of longitude-dependent fields on convection in stellar atmospheres

In rotating stellar convective zones, heat transfer is shown to be associated with unbalanced azimuth forces arising in the radially ascending (heated) or descending (cold) matter. The presence of a longitude-dependent magnetic field generates additional azimuth forces, hence, new ways of compensating for the unbalanced forces. Generally speaking, this magnetic field is variable but may be nearly static in layers where convective equilibrium is replaced by radiative equilibrium. The condition for the coexistence of the static and usual fields is derived. To this end, an axisymmetric azimuth magnetic field of energy comparable to the energy of rotation should be introduced into models under consideration. In such configurations, conditions for magnetic field generation, as in the Sun, may appear.     

Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface

An experimental study was performed to understand the nucleate boiling heat transfer of water–CuO nanoparticles suspension (nanofluids) at different operating pressures and different nanoparticle mass concentrations. The experimental apparatus is a miniature flat heat pipe (MFHP) with micro-grooved heat transfer surface of its evaporator. The experimental results indicate that the operating pressure has great influence on the nucleate boiling characteristics in the MFHP evaporator. The heat transfer coefficient and the critical heat flux (CHF) of nanofluids increase greatly with decreasing pressure as compared with those of water. The heat transfer coefficient and the CHF of nanofluids can increase about 25% and 50%, respectively, at atmospheric pressure whereas about 100% and 150%, respectively, at the pressure of 7.4 kPa. Nanoparticle mass concentration also has significant influence on the boiling heat transfer and the CHF of nanofluids. The heat transfer coefficient and the CHF increase slowly with the increase of the nanoparticle mass concentration at low concentration conditions. However, when the nanoparticle mass concentration is over 1.0 wt%, the CHF enhancement is close to a constant number and the heat transfer coefficient deteriorates. There exists an optimum mass concentration for nanofluids which corresponds to the maximum heat transfer enhancement and this optimum mass concentration is 1.0 wt% at all test pressures. The experiment confirmed that the boiling heat transfer characteristics of the MFHP evaporator can evidently be strengthened by using water/CuO nanofluids.     

Graft polymerization of vinyl monomers inside macroporous polyacrylamide gel,cryogel, in aqueous and aqueous‐organic media initiated by diperiodatocuprate(III) complexes

Graft polymerization initiated by diperiodatocuprate(III) complex (Cu(III)) initiator was found to be an effective and convenient method for graft polymerization of vinyl monomers onto macroporous polyacrylamide gels, the so‐called cryogels (pAAm‐cryogels). The effect of time, temperature, monomer and initiator concentration during the graft polymerization in aqueous and aqueous‐organic media was studied. The graft polymerization of water‐soluble monomers as [2‐(methacryloyloxy)ethyl]‐trimethylammonium chloride, 2‐hydroxyethyl methacrylate, N‐isopropylacrylamide, and N,N‐dimethylacrylamide proceeds with higher grafting yield in aqueous medium, as compared with that in aqueous‐organic media. Graft polymerization in aqueous‐organic media such as water–DMSO solutions allows grafting of water‐insoluble monomers such as glycidyl methacrylate and N‐tert‐butylacrylamide with high grafting degrees of 100 and 410%, respectively. It was found that the deposition of initiator on the pore surface of cryogels promoted graft polymerization by facilitating the formation of the redox couple Cu(III)‐acrylamide group. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1952–1963, 2006     

Phenylene vinylene‐based electroluminescent polymers with electron transport block in the main chain

We report a new route for the design of soluble phenylene vinylene (PV) based electroluminescent polymers bearing electron‐deficient oxadizole (OXD) and triazole (TZ) moieties in the main chains with the aryloxy linkage. Both series of the PV‐based polymers were prepared by Wittig reaction. By properly adjusting the OXD and/or TZ content through copolymerization, we can achieve an enhanced balance of hole‐ and electron injections, such that the device efficiency is significantly improved. Light‐emitting diodes fabricated from P1, P2, P3, P4, P5, P6, and P7 with the configuration of Indium–Tin Oxide (ITO)/Poly (styrene sulfonic acid) doped poly (ethylenedioxythiophene) (PEDOT)/polymer/Ca/Al, emit bright green light with the maximum peak around 500 nm. For the device using the optimal polymer (P4) as emitting layer, a maximum brightness of 1300 cd/m² at 20 V and a maximum luminance efficiency of 0.325 cd/A can be obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3469–3478, 2006     

Crosslinked epoxy materials exhibiting thermal remendablility and removability from multifunctional maleimide and furan compounds

Crosslinked polymeric materials, which exhibit thermal remendability and removability through Diels–Alder (DA) and retro‐DA reactions, were obtained from using multifunctional maleimide and furan compounds as monomers. The synthesized monomers possess low melting points and good solubility in organo solvents to show excellent processing properties. The performance of DA and retro‐DA reactions were demonstrated with DSC and FTIR measurements. High performance of thermal remendablility and removability of the crosslinked materials were observed with SEM and solvent tests. These materials were applicable in advanced encapsulants and structural materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 905–913, 2006