Small amplitude approximation and stabilities for dislocation motion in a superlattice

Starting from the traveling wave solution, in small amplitude approximation, the Sine-Gordon equation can be re- duced to a generalized Duffing equation to describe the dislocation motion in a superlattice, and the phase plane properties of the system phase plane are described in the absence of an applied field. The stabilities are also discussed in the presence of an applied field. It is pointed out that the separatrix orbit describing the dislocation motion as the kink wave may transfer the energy along the dislocation line, keep its form unchanged, and reveal the soliton wave properties of the dislocation motion. It is stressed that the dislocation motion process is the energy transfer and release process, and the system is stable when its energy is minimum.     

Efficient and rapid accuracy estimation of the Earth’s gravitational field from next-generation GOCE Follow-On by the analytical method

Firstly, a new analytical error model of the cumulative geoid height using the three-dimensional diagonal tensors of satellite gravity gradiometry (SGG) is introduced based on the variance-covariance matrix principle. Secondly, a study for the requirements demonstration on the next-generation GOCE Follow-On satellite gravity gradiometry system is developed using different satellite orbital altitudes and measurement accuracies of satellite gravity gradiometer by the new analytical error model of SGG. The research results show that it is preferable to design satellite orbital altitudes of 300 km-400km and choose the measurement accuracies of 10-13/s2 -10-15/s2 from satellite gravity gradiometer. Finally, the complementarity of the four-stage satellite gravity missions, including past CHAMP, current GRACE, and GOCE, and next-generation GOCE Follow-On, is contrastively demonstrated for precisely recovering the Earth’s full-frequency gravitational field with high spatial resolution.     

129I加速器质谱分析研究

通过对129I加速器质谱(AMS)分析中影响敏度和准确度各种参数的研究,如靶电极制备、压样、靶样中辅助介质（Matrix）的选择及使用比例等,优化了用于3 MV加速器质谱仪的SO-110型离子源的条件参数,确定129I-AMS测量的最佳靶电极材料为Cu,最佳的辅助介质为Nb粉末,Nb与AgI样品的最佳体积比为3∶1。在此条件下可以获得稳定且持续的I-束流进行测量129I/127I原子比值,实验测得西安加速器质谱仪的129I/127I本底值为1.5210-14。     

同轴电极结构下真空放电等离子体生成及传播特性

采用放电电流为100~300 A、持续时间为13 s的单脉冲电源,设计了两种同轴电极结构作为放电阳极,分别为筒状电极、喷嘴状电极。利用MAXWELL 3D电场仿真软件对两种电极结构下的电场分布进行了仿真分析,并采用探针法对放电生成的等离子体的参数进行了测量,分析讨论了同轴电极结构对真空放电等离子体生成特性的影响。选取喷嘴状电极结构作为阳极,分别测量了采用铅、铝、铜三种材质的阴极时生成的等离子体的扩散速度及能量。实验与仿真结果表明:当阳极为喷嘴状电极时阴极尖端的电场强度较大,测得放电电流较大,击穿电压较低,等离子体密度也较大;采用铝材质阴极时生成的等离子体扩散速度最快,采用铅材质阴极时生成的等离子体的离子动能最大。     

利用分形法表征光学元件中高频相位畸变

针对神光Ⅲ主机装置使用的光学元件,基于分形理论,分析中高频相位畸变的统计分布特征,指出其满足分数布朗随机场,并利用结构函数法对分形维数进行计算,统计结果显示,大口径钕玻璃片的分形维数在2.34~2.43之间。利用局部稳态的随机中点位移法,提出一种新的表征光学元件相位的方法,将分形维数作为参数,可衡量中高频相位畸变,对高功率激光光学元件的评价有参考意义。     

气垫导轨的计算机辅助数据采集系统的设计

研制了基于USB接口的新型光电门,结合虚拟软件Audition 1.5与计算机声卡设计了一套计算机辅助数据采集系统,用于研究气垫导轨上滑块的运动规律.     

高性能计算机用热管复合制冷系统设计研究

根据高性能计算机全天候温控的需要,提出了综合应用蒸气压缩和动力型分离式热管制冷技术的复合冷源方案。在冬季及春、秋过渡的低温季节,运行热管循环不仅大幅降低环控装置的能耗,而且可以避免在低温环境运行压缩式制冷易发生的冷启动、回油润滑等问题。提出了蒸气压缩制冷、蒸气压缩/热管复合制冷和热管制冷的分区工作模式,引入复合制冷模式有效拓宽了热管运行温区,大幅提高了制冷系统的综合COP。模拟分析了在北京地区应用热管复合制冷技术的节能性能,相比常规的压缩制冷节能率高达40%。研究表明:热管复合制冷系统具有显著的节能减排优势,特别适用于全天候工作的机房、基站等高热密度电子集成系统的温控。     

纳米Ni在77 K温度下压缩行为的研究

利用低温力学测试系统研究了电化学沉积纳米Ni在77 K温度下的压缩行为. 室温下纳米Ni 的屈服强度为 2.0 GPa, 77 K温度下的屈服强度为3.0 GPa, 压缩变形量则由室温的10%左右下降到5%. 借助应变速率敏感指数、激活体积、扫描电子显微和高分辨透射电子显微分析, 对纳米Ni的塑性变形机制进行了表征. 研究表明, 在77 K温度下的塑性变形主要是由晶界-位错协调变形主导, 晶界本征位错弓出后无阻碍地在晶粒内无位错区运动, 直至在相对晶界发生类似切割林位错行为. 同时分析了弓出位错的残留位错部分在协调塑性变形时起到的增加应变相容性和减小应力集中的作用. 利用晶界-位错协调机制和残留位错运动与温度及缺陷的相关性揭示了纳米Ni室温和77 K温度压缩性能差异的内在原因. 关键词： 塑性变形 强度 位错     

Experimental study of the temperature and electron-irradiation effect on erbium-doped fiber amplifiers

We study the influence of temperature on the gain of 980 nm pumped erbium-doped fiber amplifier (EDFA) before and after the electron irradiation. Our experimental results indicate that in the irradiation process the EDFA gain at low temperatures is less than that at high temperatures, but after 7 days recovery, the EDFA gain at low temperatures is significantly higher than that at high temperatures. After 200 krad electron irradiation, the EDFA gain is more sensitive to temperature as compared to non-irradiated one.     

混沌实验教学之路

混沌电路实验包括非线性元件如电阻或电感的选择、电路构建与波形的分析、混沌吸引子显示与模拟等内容,采用分立元件与学生自组的实验方案,坚持实验过程与理论分析相结合,是一个颇有趣味的非线性物理实验.