Application of activated carbon in the characterization of nitrogen compounds and phthalates in a landfill leachate

The goal of this work was the development of a methodology based on solid phase extraction (SPE) to characterize nitrogen compounds and phthalates from landfill leachate samples. Activated carbon (AC) was used to extract all the organic compounds from the samples. The samples were collected in Porto Alegre-South Brazil. As the AC used had small particle size, it was impossible to use it in the form of packed cartridges; hence, it had to be applied in a batch mode. The desorption of the organic compounds from the AC was made by sonication with dichloromethane. The extract was analyzed by gas chromatography with mass spectrometric detection (GC-MSD). Some aspects of the validation of the methodology were also established. Several nitrogen compounds and phthalates were identified in the samples, proving the efficiency of this method with regard to the selectiveness for these substances.     

Stability-Indicating LC Determination of a New Antihypertensive, Olmesartan Medoxomil in Tablets

A stability-indicating liquid chromatographic method was developed and validated for quantitative determination of olmesartan medoxomil (OLM) in coated tablets in the presence of degradation products generated under stress conditions. An isocratic LC separation was performed using a Phenomenex RP-18 column using a mobile phase consisting of water:triethylamine:acetonitrile (60:0.3:40 v/v/v, pH adjusted to 6.3 with phosphoric acid). The flow rate was 1.2 mL min^?1 and the detection was achieved with a photodiode array detector set at 257 nm. The response was linear over a range of 10.0 to 30.0 μg mL^?1 (r = 0.9999). The specificity and stability-indicating capability of the method was verified subjecting the reference substance and drug product to hydrolytic, oxidative, photolytic, and thermal stress conditions. The method showed a good and consistent recovery (100.2%) with low intra- and inter-day relative standard deviation (RSD) (≤1.0%). A considerable degradation occurred in all stress conditions and the degradation product was well resolved from the main peak. There was no interference of the excipients in the determination of the active pharmaceutical ingredient. Thus, the proposed method was found to be stability-indicating and can be used for routine analysis for quantitative determination of OLM in coated tablets without the interference of major degradation products.     

Liquid chromatographic determination of cetirizine in oral formulations

The development and validation of a reversed-phase liquid chromatographic (LC) method for the determination of cetirizine dihydrochloride in oral formulations are described. An isocratic LC analysis was performed on a reversed-phase C18 column (250 x 4.6 mm id, 5 microm particle size). The mobile phase was 1% orthophosphoric acid solution, pH 3.0-acetonitrile (60 + 40, v/v), pumped at a constant flow rate of 1.0 mL/min. Measurements were made at a wavelength of 232 nm. The calibration curves were linear over the range of 10-30 microg/mL (r2 = 0.9999). The relative standard deviation (RSD) values for intraday precision were 0.94 and 1.43% for tablets and compounded capsules, respectively. The RSD values for interday precision were 0.13 and 0.82% for tablets and compounded capsules, respectively. Recoveries ranged from 97.7 to 101.8% for tablets and from 98.4 to 102% for compounded capsules. No interferences from the excipients were observed. Because of its simplicity and accuracy, the method is suitable for routine quality-control analysis for cetirizine in tablets and compounded capsules.     

Evaluation of activity of a commercial amylase under ultrasound-assisted irradiation

The main objective of this work was to evaluate the effects of ultrasound irradiation on the activity of a commercial amylase. A central composite design was carried out to assess the effects of temperature and pH on the enzyme activity in the presence and absence of ultrasound irradiation. The activation energy, the influence of treatment time as well as the substrate concentration on enzyme activity were also determined in the presence and absence of ultrasound irradiation. The results demonstrated that the effect of temperature was less pronounced in the presence of ultrasound, resulting in a decreasing of about 80% in the activation energy in comparison with the value obtained in the absence. The enzyme showed activities about 3 times higher for temperatures up to 40 °C in the presence of ultrasound. The pH negatively affected the activity in the presence of ultrasound, whereas in the absence a positive effect was verified. The ultrasound irradiation is a promising technology to be used in enzymatic reaction due to its positive effects on enzyme activity.     

Pressurized liquid extraction of vitamin E from Brazilian grape seed oil

The goal of this paper is to optimize the pressurized liquid extraction (PLE) of vitamin E from grape seed oil from residues of the wine industry. For this purpose an experimental planning to optimize the extraction of Brazilian grape seed oil by means of PLE with hexane as solvent was applied and the results are compared with conventional methods (Soxhlet and mechanical press extraction). Vitamin E was separated and analyzed using HPLC with UV detection. This study demonstrates the ability of the PLE in extracting grape seed oil rich in vitamin E.     

Solid phase extraction of petroleum carboxylic acids using a functionalized alumina as stationary phase

Petroleum essentially consists of a mixture of organic compounds, mainly containing carbon and hydrogen, and, in minor quantities, compounds with nitrogen, sulphur, and oxygen. Some of these compounds, such as naphthenic acids, can cause corrosion in pipes and equipment used in processing plants. Considering that the methods of separation or clean up the target compounds in low concentrations and in complex matrix use large amounts of solvents or stationary phases, is necessary to study new methodologies that consume smaller amounts of solvent and stationary phases to identify the acid components present in complex matrix, such as crude oil samples. The proposed study aimed to recover acid compounds using the solid phase extraction method, employing different types of commercial stationary ion exchange phases (SAX and NH(2)) and new phase alumina functionalized with 1,4-bis(n-propyl)diazoniabicyclo[2.2.2]octane chloride silsesquioxane (Dab-Al(2)O(3)), synthesized in this work. Carboxylic acids were used as standard mixture in the solid phase extraction for further calculation of recovery yield. Then, the real sample (petroleum) was fractionated into saturates, aromatics, resins, and asphaltenes, and the resin fraction of petroleum (B1) was eluted through stationary ion exchange phases. The stationary phase synthesized in this work showed an efficiency of ion exchange comparable to that of the commercial stationary phases.     

Investigation of SDS, DTAB and CTAB micelle microviscosities by electron spin resonance

Electron spin resonance spectroscopy (ESR) of the nitroxide labelled fatty acid probes (5-, 16-doxyl stearic acid) was used to monitor the micelle microviscosity of three surfactants at various concentrations in aqueous solution: sodium dodecyl sulphate (SDS), dodecyltrimethylammonium bromide (DTAB) and cetyltrimethylammonium bromide (CTAB). At low surfactant concentration, there is no micelle, the ESR probe is dissolved in water/surfactant homogeneous phase and gives his microviscosity. At higher surfactant concentration, an abrupt increase in microviscosity indicates the apparition of micelles and, the solubilization of the probes in micelles. The microviscosity of the three surfactants, in a large surfactant range, was obtained as well as the critical micelle concentration (CMC). The microviscosity increased slightly with the increase in surfactant concentration. Phosphate buffer lowered the CMC value and generally increased the microviscosity.     

Determination of amlodipine in pharmaceutical dosage forms by liquid chromatography and ultraviolet spectrophotometry

A liquid chromatography (LC) method and an ultraviolet (UV) spectrophotometric method were developed and validated for quantitative determination of amlodipine in tablets and compounded capsules. The isocratic LC analyses were performed on an RP18 column using a mobile phase composed of 0.1% (v/v) ortho-phosphoric acid (pH 3.0) -acetonitrile (60 + 40, v/v) at a flow rate of 1.0 mL/min. The UV spectrophotometric method was performed at 238 nm. The analytical methods were validated according to International Conference on Harmonization Guidelines. The calibration graphs were linear [correlation coefficient (r) > 0.999] in the studied concentration range of 10-30 microg/mL for LC and 10-35 microg/mL for UV spectrophotometry. The relative standard deviation values for intraday and interday precision studies were less than 2%, and the accuracy was greater than 98% for both methods. The specificity of the LC method was proved using forced degradation. Statistical analyses showed no significant difference between the results obtained by the 2 methods. The proposed methods are precise and accurate and can be applied directly and easily to the oral pharmaceutical preparations of amlodipine.