Glycol-based sol-gel process for the fabrication of ferroelectric PZT thin films

A new sol-gel system using ethylene glycol was developed for the fabrication of PZT thin films with compositions near the morphotropic phase boundary Pb(Zr_0.52Ti_0.48)O₃. Ethylene glycol was used as both a chelating agent and a solvent to replace the highly toxic methoxyethanol used in previous formulations. Thin films were deposited by spin coating the solutions onto platinized silicon substrates. Films were completely crystallized by about 600°C and contained the ferroelectric perovskite phase. A dielectric constant of about 750–800 at 1 KHz was obtained for thin films of 0.3 µm thickness. The hysteresis measurements revealed a remanent polarization of 15 mC/cm² with a coercive field of 60 kV/cm.     

Synthesis of novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]‐pyrazoles and 5H‐pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines as potential antiproliferative agents

The synthesis of new planar derivatives characterized by the presence of a pyridothiopyranopyrazole or pyridothiopyranopyrimidine nucleus, carrying a substituted aryl group, is reported. The novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]pyrazole derivatives were obtained by condensation of 2,3‐dihydro‐3‐hydroxymethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones with appropriate hydrazines. The preparation of 2‐substituted pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines was accomplished from the intermediate 2,3‐dihy‐dro‐3‐dimethylaminomethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones by reaction with the appropriate binucleophile amidines. The antiproliferative activity of some new products was tested by an in vitro assay on human tumour cell lines (HL‐60 and HeLa), but none of them showed any significant effects in the tests performed. Accordingly, linear flow dichroism measurements indicated their inability to form a molecular complex with DNA.     

Ganglioside analysis by thin-layer chromatography matrix-assisted laser desorption/ionization orthogonal time-of-flight mass spectrometry

Metastable decomposition of ions generated in matrix-assisted laser desorption/ionization (MALDI) mass spectrometers complicates analysis of biological samples that have labile bonds. Recently, several academic laboratories and manufacturers of commercial instruments have designed instruments that introduce a cooling gas into the ion source during the MALDI event and have shown that the resulting vibrational cooling stabilizes these labile bonds. In this study, we compared stabilization and detection of desorbed gangliosides on a commercial orthogonal time-of-flight (oTOF) instrument with results we reported previously that had been obtained on a home-built Fourier transform mass spectrometer. Decoupling of the desorption/ionization from the detection steps resulted in an opportunity for desorbing thin-layer chromatography (TLC)-separated gangliosides directly from a TLC plate without compromising mass spectral accuracy and resolution of the ganglioside analysis, thus coupling TLC and oTOF mass spectrometry. The application of a declustering potential allowed control of the matrix cluster and matrix adduct formation, and, thus, enhanced the detection of the gangliosides.     

The effect of thermal pretreatment on the electrochemical response for palladium in aqueous media

Previous work on the electrochemistry of palladium in aqueous acid solution demonstrated the existence of two multilayer hydrous oxide reduction peaks, one at ca. 0.24 V and another at ca. 0.55 V vs. RHE, plus the presence of a reversible active surface state transition at ca. 0.24 V. In the present work with thermally activated palladium it was observed that, in agreement with the hydrous oxide reduction behaviour of the system, there is a second active state transition at E≥ca. 0.45 V. In most of its reactions in aqueous acid solution, apart from its unusual capacity to absorb hydrogen, palladium exhibits properties very similar to those of platinum; however, palladium seems to be more prone to dissolution and subsurface oxygen formation. Also the premonolayer oxidation responses of these two metals are often different as the more active state of the palladium surface is not as readily generated as that of platinum. The electrocatalytic properties of palladium, as reported earlier, correlate quite well with the hydrous oxide and premonolayer oxidation behaviour of this electrode system. Electronic Publication     

First row divalent transition metal complexes of aryl-appended tris((pyridyl)methyl)amine ligands: syntheses, structures, electrochemistry, and hydroxamate binding properties

Divalent manganese, cobalt, nickel, and zinc complexes of 6-Ph(2)TPA (N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-Ph(2)TPA)Mn(CH(3)OH)(3)](ClO(4))(2) (1), [(6-Ph(2)TPA)Co(CH(3)CN)](ClO(4))(2) (2), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (3), [(6-Ph(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (4)) and 6-(Me(2)Ph)(2)TPA (N,N-bis((6-(3,5-dimethyl)phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-(Me(2)Ph)(2)TPA)Ni(CH(3)CN)(2)](ClO(4))(2) (5) and [(6-(Me(2)Ph)(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (6)) have been prepared and characterized. X-ray crystallographic characterization of 1A.CH(3)()OH and 1B.2CH(3)()OH (differing solvates of 1), 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN revealed mononuclear cations with one to three coordinated solvent molecules. In 1A.CH(3)()OH and 1B.2CH(3)()OH, one phenyl-substituted pyridyl arm is not coordinated and forms a secondary hydrogen-bonding interaction with a manganese bound methanol molecule. In 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN, all pyridyl donors of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands are coordinated to the divalent metal center. In the cobalt, nickel, and zinc derivatives, CH/pi interactions are found between a bound acetonitrile molecule and the aryl appendages of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands. (1)H NMR spectra of 4 and 6 in CD(3)NO(2) solution indicate the presence of CH/pi interactions, as an upfield-shifted methyl resonance for a bound acetonitrile molecule is present. Examination of the cyclic voltammetry of 1-3 and 5 revealed no oxidative (M(II)/M(III)) couples. Admixture of equimolar amounts of 6-Ph(2)TPA, M(ClO(4))(2).6H(2)O, and Me(4)NOH.5H(2)O, followed by the addition of an equimolar amount of acetohydroxamic acid, yielded the acetohydroxamate complexes [((6-Ph(2)TPA)Mn)(2)(micro-ONHC(O)CH(3))(2)](ClO(4))(2) (8), [(6-Ph(2)TPA)Co(ONHC(O)CH(3))](ClO(4))(2) (9), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))](ClO(4))(2) (10), and [(6-Ph(2)TPA)Zn(ONHC(O)CH(3))](ClO(4))(2) (11), all of which were characterized by X-ray crystallography. The Mn(II) complex 8.0.75CH(3)()CN.0.75Et(2)()O exhibits a dinuclear structure with bridging hydroxamate ligands, whereas the Co(II), Ni(II), and Zn(II) derivatives all exhibit mononuclear six-coordinate structures with a chelating hydroxamate ligand.     

Synthesis and characterization of some Cr(III), Fe(III) and Zr(IV) compounds with substituted o-hydroxy benzophenone

This work presents our data concerning the synthesis and characterization of some Cr(III), Fe(III) and Zr(IV) complexes with substituted (2-hydroxy-4-methoxy-phenyl)-phenyl-methanone - C₁₄H₁₂O₃, denoted by (L1). The synthesis of these complex compounds was performed using melted urea as reaction medium. The obtained complexes have been studied by chemical analysis, IR spectroscopy, X-ray diffraction and thermogravimetric analysis. Based on the data resulting from the thermal behaviour of the studied complex compounds, the kinetic parameters of the thermal decomposition reactions have been determined. This revised version was published online in July 2006 with corrections to the Cover Date.     

Derivation of class II force fields. VIII. Derivation of a general quantum mechanical force field for organic compounds

A class II valence force field covering a broad range of organic molecules has been derived employing ab initio quantum mechanical "observables." The procedure includes selecting representative molecules and molecular structures, and systematically sampling their energy surfaces as described by energies and energy first and second derivatives with respect to molecular deformations. In this article the procedure for fitting the force field parameters to these energies and energy derivatives is briefly reviewed. The application of the methodology to the derivation of a class II quantum mechanical force field (QMFF) for 32 organic functional groups is then described. A training set of 400 molecules spanning the 32 functional groups was used to parameterize the force field. The molecular families comprising the functional groups and, within each family, the torsional angles used to sample different conformers, are described. The number of stationary points (equilibria and transition states) for these molecules is given for each functional group. This set contains 1324 stationary structures, with 718 minimum energy structures and 606 transition states. The quality of the fit to the quantum data is gauged based on the deviations between the ab initio and force field energies and energy derivatives. The accuracy with which the QMFF reproduces the ab initio molecular bond lengths, bond angles, torsional angles, vibrational frequencies, and conformational energies is then given for each functional group. Consistently good accuracy is found for these computed properties for the various types of molecules. This demonstrates that the methodology is broadly applicable for the derivation of force field parameters across widely differing types of molecular structures. Copyright 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1782-1800, 2001     

Capillary electrophoresis determinative and GC-MS confirmatory method for water-soluble organic acids in airborne particulate matter and vehicle emission

Urban fine airborne particulate matter (PM2.5) and vehicle emission samples were studied for water-soluble low-molecular-weight carboxylic acids using CE with indirect UV detection. Further identification of these acids was achieved using GC-MS as their butyl esters (after derivatization with BF3/butanol). Several dicarboxylic acids in the range C2-C10 including straight-chain, branched-chain, cis- and trans-unsaturated, and aromatic acids were confirmed by GC-MS. In addition, aromatic acids such as benzoate, phthalate, terephthalate, isophthalate, and 4-methylphtalate were present in such samples, but some of these were not well resolved by the used CE method. Oxocarboxylic acids (Cn(w) with n > 4) were also identified by GC-MS but not determined by CE due to lack of standards. The rapidity and simplicity of the CE method were clearly demonstrated, and the method was observed to be advantageous for routine monitoring of water-soluble organic acids in airborne PM2.5 and vehicle emission at low microg/L levels.     

An investigation into causes and effects of high cyanide levels in the palladium-catalyzed cyanation reaction

[reaction: see text] The palladium-catalyzed cyanation reaction is known to be sensitive to dissolved cyanide. Investigation into some causes of high levels of dissolved cyanide is presented here, along with a robust solution to this problem.