ICAP-analysis of cadmium and lead in whole blood

Summary The present study deals with the determination by ICAP-AES of cadmium and lead present at normal and elevated concentrations in whole blood. Three sample treatment techniques were tested, viz. the Stoeppler method (matrix modification), low temperature ashing, and thermal ashing. The latter two techniques were applied in combination with an extraction procedure for iron and a pre-concentration procedure using Controlled Pore Glass immobilized 8-hydroxyquinoline (CPG-8HQ). The determination of normal concentrations was accomplished by microsampling of analyte concentrates essentially free from matrix metals. The sample treatment techniques applied were assessed on the basis of detection limit, accuracy, precision, pre-concentration capability, and laboriousness.

---

ICAP-Analyse von Cadmium und Blei in Vollblut

Zusammenfassung Die Anwendung der ICAP-Emissions-spektrometrie für die Bestimmung von Cadmium und Blei bei normalen und erhöhten Konzentrationen in Vollblut wird beschrieben. Drei Probevorbereitungsverfahren wurden geprüft: die Stoeppler-Methode (Matrixmodifikation), die Niedrigtemperatur-Veraschung im Sauerstoffplasma und die thermische Veraschung. Anschlie\end an die letzten beiden Verfahren erfolgte eine Extraktion von Eisen und ein Anreicherungsverfahren mit auf Controlled Pore Glass immobilisierten 8-Hydroxychinolin. Die Bestimmung normaler Konzentrationen konnte durch Mikroanalyse nahezu matrixfreier Konzentrate erfa\t werden. Die Probenvorbereitungsverfahren wurden in bezug auf Nachweisgrenze, Richtigkeit, PrÄzision, AnreicherungsfÄhigkeit und Zeitaufwand beurteilt.

     

Development of membrane extraction with a sorbent interface-micro gas chromatography system for field analysis

The commercially available portable gas chromatographs have a rather limited scope of applications, typically allowing analysis of gaseous samples only, and having relatively poor sensitivity. Combination of those instruments with modern sampling/sample preparation techniques can remedy these problems. A Chrompack micro-GC system equipped with a thermal conductivity detector has been coupled to membrane extraction with a sorbent interface (MESI). The sorbent trap has replaced the GC injector. The design of the trap was also modified in order to enhance the preconcentration of analytes. The use of a thin flat sheet membrane reduces the response time, and decreases the memory effect of the system. Rapid separation times were achieved, and the sensitivity was significantly improved. MESI enables semi-continuous monitoring of both gaseous and aqueous samples, owing to the selectivity of the membrane material. The system does not use moving parts, therefore being reliable. The sensitivity of the micro-GC system was increased by a factor of more than 100 by the addition of the MESI system, even with a preconcentration time as short as 1 min. Chloroform, having a concentration lower than 1 ppb, was detected in tap water. A cup system was used to allow headspace sampling of volatile organic compounds from aqueous matrices, keeping the membrane away from interfering species that could be present in water, and improving the mass transfer. A linear calibration line was obtained, and the estimated limit of detection was 60 ppt. This represents a great improvement for the sensitivity of the micro-GC system.     

Simultaneous effects of relaxation and polarization transfer in LaF3-type crystals as sources of dynamic information

Fluorine nuclear magnetic resonance (NMR) spin-lattice relaxation dispersion has been measured for pure LaF(3) and La(1-x)Sr(x)F(3-x) for admixture concentrations x ranging from 0.01% up to 16%. The relaxation dispersion experiments have been carried out in a wide frequency range (20 kHz-40 MHz) at temperatures between 300 and 1400 K. The data have been analyzed using the recently published [J. Magn. Res. 179 (2006) 250] relaxation model for multispin systems of mutually interacting quadrupolar and dipolar nuclei. Rate constants of the fluorine ionic jumps within and among distinct fluorine sublattices have been extracted. Characteristic effects of the polarization transfer between fluorine and lanthanum spins have been observed and attributed to slow dynamics within one of the fluorine sublattices.     

Effect of the precipitation of neutral-soap, acid-soap, and alkanoic acid crystallites on the bulk pH and surface tension of soap solutions

The natural pH of sodium dodecanoate (laurate), NaL, and sodium tetradecanoate (myristate), NaMy, solutions is measured as a function of the surfactant concentrations at 25 degrees C, and at several fixed NaCl concentrations. Surface tension isotherms are also obtained. Depending on the surfactant concentration, the investigated solutions contain precipitates of alkanoic acid, neutral soap, and acid soaps. The latter are complexes of alkanoic acid and neutral soap with a definite stoichiometry. A method for identification of the different precipitates from the experimental pH isotherms is developed. It is based on the analysis of precipitation diagrams, which represent plots of characteristic functions. This analysis reveals that for the NaL solutions there are three concentration regions with different precipitates, including lauric acid and 1:1 acid soap. In the case of NaMy solutions, we identified the existence of concentration regions with precipitates of myristic acid: 4:1, 3:2, and 1:1 acid soaps, and coexistence of two solid phases: 1:1 acid soap and neutral soap. The solubility products of the precipitates have been determined. Modeling the acid soaps of different stoichiometry as solid solutions of alkanoic acid and 1:1 acid soap, we derived a theoretical expression for their solubility products, which agrees well with the experiment. The kinks in the surface-tension isotherms of the investigated solutions correspond to some of the boundaries between the regions with different precipitates in the bulk. The theoretical analysis indicates that for the NaL solutions the adsorption layer is composed mostly of lauric acid, while for the NaMy solutions + 10 mM NaOH the adsorption layer is composed of nondissociated molecules of neutral soap. The developed approach could be applied to analyze the type of precipitates and the behavior of the surface tension for solutions of sodium and potassium alkanoates with different chain lengths at various temperatures and concentrations.     

One-size adjustable-gap cluster anions: systematic approach to multinary, water-soluble chalcogenidometalate compounds

Reactions of defined mixtures of ternary salts [K 4(H 2O) 4][SnSe 4] and [K 4(H 2O) 0.5][SnTe 4] with transition-metal ions M = Zn (2+) or Mn (2+) provide an easy approach to penternary salts of quaternary cluster anions [M 4Sn 4Se 17- x Te x ] (10-), with x corresponding to the Se/Te ratio of the reactant mixture. In this way, it is possible to generate both protic solutions and single crystals with finely adjustable electronic excitation energies E g; the fact that the E g values cover the whole visible part of the electromagnetic spectrum as a function of the parameter x spotlights these cluster compounds with respect to diverse photocatalytic applications.     

Surface shear rheology of adsorption layers from the protein HFBII hydrophobin: effect of added β-casein

The surface shear rheology of hydrophobin HFBII adsorption layers is studied in angle-ramp/relaxation regime by means of a rotational rheometer. The behavior of the system is investigated at different shear rates and concentrations of added β-casein. In angle-ramp regime, the experimental data comply with the Maxwell model of viscoelastic behavior. From the fits of the rheological curves with this model, the surface shear elasticity and viscosity, E(sh) and η(sh), are determined at various fixed shear rates. The dependence of η(sh) on the rate of strain obeys the Herschel-Bulkley law. The data indicate an increasing fluidization (softening) of the layers with the rise of the shear rate. The addition of β-casein leads to more rigid adsorption layers, which exhibit a tendency of faster fluidization at increasing shear rates. In relaxation regime, the system obeys a modified Andrade's (cubic root) law, with two characteristic relaxation times. The fact that the data comply with the Maxwell model in angle-ramp regime, but follow the modified Andrade's low in relaxation regime, can be explained by the different processes occurring in the viscoelastic protein adsorption layer in these two regimes: breakage and restoration of intermolecular bonds at angle-ramp vs solidification of the layer at relaxation.     

Latex-particle-stabilized emulsions of anti-Bancroft type

Here, we investigate water-in-oil (W/O) emulsions that are stabilized by polystyrene latex particles with sulfate surface groups. The particles, which play the role of emulsifier, are initially contained in the disperse (water) phase. The existence of such emulsions formally contradicts the empirical Bancroft rule. Theoretical considerations predict that the drop diameter has to be inversely proportional to the particle concentration, but should be independent of the volume fraction of water. In addition, there should be a second emulsification regime, in which the drop diameter is determined by the input mechanical energy during the homogenization. The existence of these two regimes has been experimentally confirmed, and the obtained data agree well with the theoretical model. Stable W/O emulsions have been produced with hexadecane and tetradecane, while, in the case of more viscous and polar oils (soybean and silicone oil), the particles enter into the oily phase, and Pickering emulsions cannot be obtained. The formation of stable emulsions demands the presence of a relatively high concentration of electrolyte that lowers the electrostatic barrier to particle adsorption at the oil-water interface. Because the attachment of particles at the drop surfaces represents a kind of coagulation, it turns out that the Schulze-Hardy rule for the critical concentration of coagulation is applicable also to emulsification, which has been confirmed with suspensions containing Na(+), Mg(2+), and Al(3+) counterions. The increase of the particle and electrolyte concentrations and the decrease of the volume fraction of water are other factors that facilitate emulsification in the investigated system. To quantify the combined action of these factors, an experimental stability-instability diagram has been obtained.