Increased viability of odontoblast-like cells subjected to low-level laser irradiation

Studies have shown that the increase of cell metabolism depends on the low level laser therapy (LLLT) parameters used to irradiate the cells. However, the optimal laser dose to up-regulate pulp cell activity remains unknown. Consequently, the aim of this study was to evaluate the metabolic response of odontoblast-like cells (MDPC-23) exposed to different LLLT doses. Cells at 20000 cells/cm² were seeded in 24-well plates using plain culture medium (DMEM) and were incubated in a humidified incubator with 5% CO₂ at 37°C. After 24 h, the culture medium was replaced by fresh DMEM supplemented with 5% (stress by nutritional deficit) or 10% fetal bovine serum (FBS). The cells were exposed to different laser doses from a near infrared diode laser prototype designed to provide a uniform irradiation of the wells. The experimental groups were: G1: 1.5 J/cm² + 5% FBS; G2: 1.5 J/cm² + 10% FBS; G3: 5 J/cm² + 5% FBS; G4: 5 J/cm² + 10% FBS; G5: 19 J/cm² + 5% FBS; G6: 19 J/cm² + 10% FBS. LLLT was performed in 3 consecutive irradiation cycles with a 24-hour interval. Non-irradiated cells cultured in DMEM supplemented with either 5 or 10% FBS served as control groups. The analysis of the metabolic response was performed by the MTT assay 3 h after the last irradiation. G1 presented an increase in SDH enzyme activity and differed significantly (Mann-Whitney test, p < 0.05) from the other groups. Analysis by scanning electron microscopy showed normal cell morphology in all groups. Under the tested conditions, LLLT stimulated the metabolic activity of MDPC-23 cultured in DMEM supplemented with 5% FBS and exposed to a laser dose of 1.5 J/cm². These findings are relevant for further studies on the action of near infrared lasers on cells with odontoblast phenotype.     

Thermal and viscosity characterization of two asphalt emulsions

Journal of Thermal Analysis and Calorimetry - Asphalt emulsion is a versatile product that can be used for different waterproofing applications in civil construction and highway constructions....     

Building the Additive Utility Functions for CAD-UFRJ Evaluation Staff Criteria

This paper presents an application of the UTA method for building utility functions for the evaluation criteria defined by the Staff Evaluation Commission (CAD) of the Rio de Janeiro Federal University (UFRJ). Every year, the CAD-UFRJ gives the staff evaluation results for each Postgraduate Engineering Programme. However, the method used to generate the staff evaluation is assumed unknown. Trying to find the CAD-UFRJ preference structure, the evaluation results supplied by CAD-UFRJ are used to apply the UTA method. Some additional information obtained from the CAD-UFRJ data is incorporated in the optimal solutions analysis.     

Some examples for the Poincaré and Painlevé problems

In 1891, Poincaré started a series of three papers in which he tried to answer the following question (cf. [21-23]): “Is it possible to decide if an algebraic differential equation in two variables is algebraically integrable?” (in the sense that it has a rational first integral). More or less at the same time P. Painlevé asked the following question: “Is it possible to recognize the genus of the general solution of an algebraic differential equation in two variables which has a rational first integral?”. In this paper we give examples of one-parameter families which show that both problems have a negative answer. With some of the families we can also answer a question posed by M. Brunella in [5].     

Holomorphic rank of hypersurfaces with an isolated singularity

LetV be a germ at 0 C ²,n3, of hypersurface with an isolated singularity at 0. In this paper we prove that the maximal number of germs of vector fields inV ^*=V–0, which are linearly independent in all points ofV ^* is two. In the casesn=3,4 and of quasi homogeneous hypersurfaces (n3), we prove that this number is one.Dedicated to the memory of R. MañéThis research was partially supported by Pronex.     

Measurement of shrinkage of composite resin by laser speckle contrast analysis

The aim of this study was to evaluate the shrinkage of a microhybrid dental composite resin photo-activated by one LED with different power densities by means of speckle technique. The dental composite resin Filtek™ Z-250 (3M/ESPE) at color A₂ was used for the samples preparation. Uncured composite was packed in a metallic mold and irradiated during 20 s from 100 to 1000 mW cm⁻². For the photo-activation of the samples, it was used a LED prototype (Light Emission Diode) with wavelength centered at 470 nm and adjustable power density until 1 W cm⁻². The speckle patterns obtained from the bottom composite surfaces were monitored using a CCD camera without lens. The speckle field is recorded in a digital picture and stored by CCD camera as the carrier of information on the displacement of the tested surface. The calculated values were obtained for each pair of adjacent patterns and the changes in speckle contrast as a function of time were obtained from six repeated measurements. The speckle contrasts obtained from the bottom surface with 100 mW cm⁻¹ were smaller than those than the other power densities. The higher power densities provided the higher shrinkage.     

Chemiluminescence as a PDT light source for microbial control

The photodynamic therapy (PDT) is a combination of using a photosensitizer agent, light and oxygen that can cause oxidative cellular damage. This technique is applied in several cases, including for microbial control. The most extensively studied light sources for this purpose are lasers and LED-based systems. Few studies treat alternative light sources based PDT. Sources which present flexibility, portability and economic advantages are of great interest. In this study, we evaluated the in vitro feasibility for the use of chemiluminescence as a PDT light source to induce Staphylococcus aureus reduction. The Photogem? concentration varied from 0 to 75 μg/ml and the illumination time varied from 60 min to 240 min.The long exposure time was necessary due to the low irradiance achieved with chemiluminescence reaction at μW/cm2 level. The results demonstrated an effective microbial reduction of around 98% for the highest photosensitizer concentration and light dose. These data suggest the potential use of chemiluminescence as a light source for PDT microbial control, with advantages in terms of flexibility, when compared with conventional sources.     

A new GROMOS force field for hexopyranose-based carbohydrates

A new parameter set (referred to as 45A4) is developed for the explicit-solvent simulation of hexopyranose-based carbohydrates. This set is compatible with the most recent version of the GROMOS force field for proteins, nucleic acids, and lipids, and the SPC water model. The parametrization procedure relies on: (1) reassigning the atomic partial charges based on a fit to the quantum-mechanical electrostatic potential around a trisaccharide; (2) refining the torsional potential parameters associated with the rotations of the hydroxymethyl, hydroxyl, and anomeric alkoxy groups by fitting to corresponding quantum-mechanical profiles for hexopyranosides; (3) adapting the torsional potential parameters determining the ring conformation so as to stabilize the (experimentally predominant) (4)C(1) chair conformation. The other (van der Waals and nontorsional covalent) parameters and the rules for third and excluded neighbors are taken directly from the most recent version of the GROMOS force field (except for one additional exclusion). The new set is general enough to define parameters for any (unbranched) hexopyranose-based mono-, di-, oligo- or polysaccharide. In the present article, this force field is validated for a limited set of monosaccharides (alpha- and beta-D-glucose, alpha- and beta-D-galactose) and disaccharides (trehalose, maltose, and cellobiose) in solution, by comparing the results of simulations to available experimental data. More extensive validation will be the scope of a forthcoming article. (c) 2005 Wiley Periodicals, Inc. J Comput Chem 26: 1400-1412, 2005.