Photo-oxidation of polyhydroxyl molecules on TiO2 surfaces: from hole scavenging to light-induced self-assembly of TiO2-cyclodextrin wires

First-principles calculations are carried out to study photo-oxidation of glucose, as a prototype of polyhydroxyl carbohydrates and alcohols, on TiO2 surfaces. We reveal the microscopic mechanisms for the separation and transfer of photogenerated electrons and holes at the TiO2-molecule interface as detailed from hole trapping, deprotonation, to the formation of an electron-hole recombination center. These revealed mechanisms further lead to the understanding of the light-induced self-assembly mechanism for TiO2-cyclodextrin nanowires.     

核磁共振任意波形发生器的研制

任意波形发生器（又叫函数发生器）作为一种通用的信号源,在物理、电子、计算机等领域有着广泛的应用. 本文提出了一种不依赖PC机总线的、完全独立的、 可用于低场磁共振成像的多用途任意波形发生器（Arbitrary Waveform Generator, AWG）设计方案,围绕着这种方案,研制了80 MHz通用磁共振任意波形发生器. 并提供了实际测试数据和成像实验结果,对研制情况和实验结果进行了总结和讨论.     

Inhibition of Thiol-Mediated Uptake with Irreversible Covalent Inhibitors

Thiol-mediated uptake is emerging as method of choice to penetrate cells. This study focuses on irreversible covalent inhibitors of thiol-mediated uptake. High-content high-throughput screening of the so far largest collection of hypervalent iodine reagents affords inhibitors that are more than 250 times more active than Ellman’s reagent and rival the best dynamic covalent inhibitors. Comparison with other irreversible reagents reveals that inhibition within one series follows reactivity, whereas inhibition across series deviates from reactivity. These trends support that molecular recognition, besides dynamic covalent exchange, contributes significantly to thiol-mediated uptake. The most powerful inhibitors besides the best hypervalent iodine reagents were Fukuyama’s nosyl protecting group and super-cinnamaldehydes that have been introduced as irreversible activators of the pain receptor TRPA1. Considering that several viruses use different forms of thiol-mediated uptake to enter cells, the identification of new irreversible inhibitors of thiol-mediated uptake is of general interest for the discovery of new antivirals.     

A Bifunctional B,N-Based Asymmetric Catalytic Nitrostyrene-Michael Addition Acting through a 10-Membered Ring Cyclic Transition State

The B,N-bifunctional catalyst homoboroproline has been applied to a catalytic asymmetric nitroalkene-Michael addition to β-nitrostyrene analogues, showing broad substrate tolerance, high conversions and moderate to good asymmetric induction. The ability of homoboroproline to act as an efficient catalyst based on enamine-formation of the secondary amine, coupled with intramolecular Lewis-acid chelation of the nitro function, in a non-FLP manner, to effect efficient and enantioselective catalysis via a proposed large 10-membered ring transition state is remarkable and reinforced by theoretical calculations.     

Single Chlamydomonas reinhardtii cell separation from bacterial cells and auto-fluorescence tracking with a nanosieve device

A planar, transparent, and adaptable nanosieve device is developed for efficient microalgae/bacteria separation. In the proposed method, a sacrificial layer is applied with dual photolithography patterning to achieve a 1D channel with a very low aspect ratio (1:10 000). A microalgae/bacteria mixture is then introduced into the deformable PDMS nanochannel. The hydrodynamic deformation of the nanochannel is regulated to allow the bacteria cells to pass through while leaving the microalgae cells trapped in the device. At a flow rate of 4 μL/min, the supernatant collected from the device is indistinguishable from a control solution, indicating that nearly all the microalgae cells are trapped in the device. Additionally, this device is capable of single cell auto-fluorescence tracking. These microalgae cells demonstrate minimal photobleaching over 250 s laser exposure and could be used to monitor hazardous compounds in the sample with a continuous flow. This method will be valuable to purify microalgae samples containing contaminations and study single-cell heterogeneity.     

High-strength and low-swelling chitosan/cellulose microspheres as a high-efficiency adsorbent for dye removal

Cellulose - Dye contamination of water supplies has a serious threat to human health, prompting the development of highly effective and eco-friendly adsorbents. In this work, polyelectrolyte...     

Contradictory effect of gold nanoparticle-decorated molybdenum sulfide nanocomposites on amyloid-β-40 aggregation

The effect of gold nanoparticle-decorated molybdenum sulfide (AuNP-MoS₂) nanocomposites on amyloid-β-40 (Aβ₄₀) aggregation was investigated. The interesting discovery was that the effect of AuNP-MoS₂ nanocomposites on Aβ₄₀ aggregation was contradictory. Low concentration of AuNP-MoS₂ nanocomposites could enhance the nucleus formation of Aβ₄₀ peptides and accelerate Aβ₄₀ fibrils aggregation. However, although high concentration of AuNP-MoS₂ nanocomposites could enhance the nucleus formation of Aβ₄₀ peptides, it eventually inhibited Aβ₄₀ aggregation process. It might be attributed to the interaction between AuNP-MoS₂ nanocomposites and Aβ₄₀ peptides. For low concentration of AuNP-MoS₂ nanocomposites, it was acted as nuclei, resulting in the acceleration of the nucleation process. However, the structural flexibility of Aβ₄₀ peptides was limited as the concentration of AuNP-MoS₂ nanocomposites was increased, resulting in the inhibition of Aβ₄₀ aggregation. These findings suggested that AuNP-MoS₂ nanocomposites might have a great potential to design new multifunctional material for future treatment of amyloid-related diseases.     

Oxidation of aromatic sulfides with molecular oxygen: Controllable synthesis of sulfoxides or sulfones

The recent development of selective oxidation of aromatic sulfides with molecular oxygen was highlighted. The sulfoxides and sulfones could be obtained by simply switching the reaction media, i.e., bis(2-butoxyethyl)ether (BBE) or poly(ethylene glycol)dimethyl ether (PEGDME). The application of the high-boiling-point polyether as an initiator and green media can eliminate the need of large quantities of additives and volatile solvents. This strategy represents an economic and eco-friendly method that could find potential applications.     

Catalytic transfer hydrogenation of biomass-derived furfural to furfuryl alcohol with formic acid as hydrogen donor over CuCs-MCM catalyst

Catalytic transfer hydroge nation(CTH) of furfural(FF) to furfu ryl alcohol(FFA) has received great intere st in recent years.He rein,Cu-Cs bimetallic supported catalyst,CuCs(2)-MCM,was developed for the CTH of FF to FFA using formic as hydrogen donor.CuCs(2)-MCM achieved a 99.6% FFA yield at an optimized reaction conditions of 170℃,1 h.Cu species in CuCs(2)-MCM had dual functions in catalytically decomposing formic acid to generate hydrogen and hydrogenating FF to FFA.The doping of Cs made the size of Cu particles smaller and improved the dispersion of the Cu active sites.Impo rtantly,the Cs species played a favorable role in enhancing the hydrogenation activity as a promoter by adjusting the surface acidity of Cu species to an appropriate level.Correlation analysis showed that surface acidity is the primary factor to affect the catalytic activity of CuCs(2)-MCM.