Influence of the water molecule on cation-pi interaction: ab initio second order Møller-Plesset perturbation theory (MP2) calculations

The influence of introducing water molecules into a cation-pi complex on the interaction between the cation and the pi system was investigated using the MP2/6-311++G method to explore how a cation-pi complex changes in terms of both its geometry and its binding strength during the hydration. The calculation on the methylammonium-benzene complex showed that the cation-pi interaction is weakened by introducing H(2)O molecules into the system. For example, the optimized interaction distance between the cation and the benzene becomes longer and longer, the transferred charge between them becomes less and less, and the cation-pi binding strength becomes weaker and weaker as the water molecule is introduced one by one. Furthermore, the introduction of the third water molecule leads to a dramatic change in both the complex geometry and the binding energy, resulting in the destruction of the cation-pi interaction. The decomposition on the binding energy shows that the influence is mostly brought out through the electrostatic and induction interactions. This study also demonstrated that the basis set superposition error, thermal energy, and zero-point vibrational energy are significant and needed to be corrected for accurately predicting the binding strength in a hydrated cation-pi complex at the MP2/6-311++G level. Therefore, the results are helpful to better understand the role of water molecules in some biological processes involving cation-pi interactions.     

γ—Mo2N合成过程中的热变化及中间产物的研究

采用ＤＴＡ技术，通过改变升温速率研究了γ－Ｍｏ２Ｎ合成过程中的热变化，并经ＸＲＤ，ＢＥＴ及ＩＲ测试，对ＤＴＡ曲线中的谱峰进行归属，考察了中间产物，ＤＴＡ结果表明，在ＭｏＯ３和ＮＨ３程序升温反应过程中有放热峰及吸热峰出现，且随升温速率的长高，放热峰面积与吸热峰面积之比逐渐减小，结合ＸＲＤ及ＩＲ结果可知，ＤＴＡ曲线听放热峰可归属为由ＭｏＯ３变化为ＭｏＯ２的还原峰，吸热峰则归属为由ＭｏＯ２变化为Ｍｏ２Ｎ     

Silicone-modified starch/protein microparticles: protecting biopolymers with a hydrophobic coating

Silicone-coated starch/protein (human serum albumin, HSA) microparticles were prepared by precipitation of a starch/HSA/DMSO/water (water-in-oil) emulsion into acetone containing a silicone: the silicone polymer was either unfunctionalized (SiMe₃ terminated, PDMS) or functionalized at its termini with Si(OEt)₃ groups (TES-PDMS). The microparticles of approximate diameter 2–7 μm were highly hydrophobic with advancing contact angles 115°. Over several minutes, however, the contact angle decreased to ca. 40–70°. Soxhlet extraction with water led to degradation of the microparticles, irrespective of the nature of their silicone coating, as evidenced by release of the protein from them. Intraperitoneal (IP) or gastric administration of the two different particles to mice, however, showed a clear difference between the two silicones. The microparticles coated with either PDMS or TES-PDMS led to very different immune responses. Oral administration of the microparticles prepared with functionalized silicone elicited a significant production of antibodies, whereas the particles prepared with the unfunctionalized silicone (PDMS) were only weakly active. By contrast, the IP results demonstrated that particles coated with PDMS elicited an immune response that was established much more rapidly than with the particles modified with TES-PDMS. It is proposed that the TES-PDMS forms a physically adhering film or covalent bond to the protein molecules, which serves to protect the microparticle from biological degradation in the gut and/or facilitates the microparticle/protein interaction with the immune system.     

药用缓释辅料——羟丙基甲基纤维素的合成及其缓释性能的研究

本文研究了药物缓释材料HPMC的合成方法,探讨了碱纤维素制备,醚化剂浓度,混合醚化剂配经以及产品后处理对高粘度HPMC的影响。本文还初步对KCl,氨茶碱,硝酸异山梨醇酯等药物采用合成的HPMC作辅料,进行了缓释制剂的研究,结果表明合成的HPMC具有满意的缓释性能。     

Fluoro-substituted DPP-bisthiophene conjugated polymer with azides in the side chains as ambipolar semiconductor and photoresist

Photoresists are essential for the fabrication of flexible electronics through all-photolithographic processes. Single component semiconducting photoresist exhibits both semiconducting and photo-patterning properties, and as a result, the device fabrication process can be simplified. However, the design of semiconducting polymeric photoresist with ambipolar semiconducting property remains challenging. In this paper, we report a single component semiconducting photoresist (PFDPPF4T-N₃) by incorporating azide groups and noncovalent conformation locks into the side alkyl chains and conjugated backbones of a diketopyrrolopyrrole-based conjugated polymer, respectively. The results reveal that PFDPP4FT-N₃ exhibits ambipolar semiconducting property with hole and electron mobilities up to 1.12 and 1.17 cm² V^?1 s^?1, respectively. Moreover, field effect transistors with the individual photo-patterned thin films of PFDPPF4T-N₃ also show ambipolar semiconducting behavior with hole and electron mobilities up to 0.66 and 0.80 cm² V^?1 s^?1, respectively. These results offer a simple yet effective design strategy for high-performance single component semiconducting photoresists, which hold great potential for flexible electronics processed by all photolithography.

     

Electrogenerated Chemiluminescence Based on Tris(2,2′-bipyridyl) Ruthenium(II) with Hydroxyl Carboxylic Acid

Upon the electrochemical oxidation of tris(2,2′-bipyridyl) ruthenium(II) [Ru(bpy)²⁺₃] and hydroxyl carboxylic acids, for instance, citric acid, tartaric acid, malic acid, and -gluconic acid, bright electrochemiluminescences (ECLs) were observed. Different luminescent reactions were presented depending on the applied potential. The light emission was mainly caused by the reaction between alkoxide radical ion and Ru(bpy)³⁺₃below the potential +1.80 V (vs Ag/AgCl). The luminescence intensity obviously increased because of the more complex reaction process. The luminescence wavelength of 608 nm, which could be found either at higher potential than +1.80 V or in the potential range from +1.30 to +1.80 V, confirmed that ECL was caused by Ru(bpy)²⁺₃*. The factors which affect the determination and HPLC separation of the four acids were also investigated.     

氯过氧化物酶的手性催化活性在有机合成中的应用

氯过氧化物酶（CPO）作为过氧化物酶家族中的一员对多种有机底物表现出了广泛的催化活性。自上世纪60年代被发现以来，CPO在有机合成中的应用一直是一个研究热点。它作为一种生物催化剂能催化广泛的底物合成手性化合物，且有高的产率和高的对映选择率。本文综述了氯过氧化物酶在手性有机合成中的应用，重点关注了卤化、醇氧化、羟基化、环氧化、磺化氧化等反应，并讨论了目前在该领域所面临的问题及今后的发展趋势。     

Study of the Fluorescence System of Europium–Enoxacin and its Applications

 This paper is the study of the fluorescence enhancement of Eu³⁺-1-ethyl-6-fluoro-4-oxo-7-(1-piperazinyl)-1,8-naphthyridin-3-carbonic acid (enoxacin, EFLX) system by surfactants. It was found that sodium dodecylbenzenesulfonate (SDBS) exhibits great enhancement on the fluorescence of the Eu-EFLX system. The molar ratio is 1:2:1 for Eu:EFLX: SDBS. Under the optimum conditions, the fluorescence intensity is a linear function of europium in the range of 1.0 × 10⁻⁸ ∼ 5.0 × 10⁻⁶ mol/L, the detection limit is 1.0 × 10⁻⁹ mol/L. The application of the Eu-EFLX-SDBS system for the determination of trace europium in rare earth samples gave satisfactory results. Received October 19, 2000. Revision August 10, 2001.     

New supports for enzyme immobilization based on copolymers of vinylene carbonate and acrylamide

In this study, a series of beadlike and hydrophilic supports containing reactive cyclic carbonate groups for enzyme immobilization were prepared via reverse-phase suspension copolymerization of the aqueous solutions of vinylene carbonate (VCA), acrylamide (AA), and N,N′-methylene bisacrylamide in paraffin oil. The supports were used as a matrix for immobilization of trypsin and showed a considerable capacity to couple with trypsin and reasonable retention of activity for the immobilized trypsin, depending on the immobilization conditions, such as the content of VCA structural units, reaction time, and pH of the medium.     

Simultaneous determination of noradrenaline and dopamine in Portulaca oleracea L. by capillary zone electrophoresis

A simple and rapid capillary electrophoretic method was developed for the simultaneous determination of noradrenaline (NA) and dopamine (DA) in Portulaca oleracea L. The buffer solution used in this method was 40 mM tris (hydroxymethyl) aminomethane (Tris)-H3PO4 at pH 2.00 containing 15% methanol. The effects of pH value, organic modifier, and applied voltage were investigated. The linear ranges of NA and DA were 0.5-100 microg/mL (r=0.9952) and 6.25-200 microg/mL (r=0.9992), respectively. The relative standard deviations of the corrected peak area were 6.73% and 4.26%, respectively. NA and DA in Portulaca oleracea L. were simultaneous determined successfully within 5.6 min. In this way, the contents of NA and DA in different parts (stem, leaves, and seeds) of P. oleracea L. and in different extracts of leaves with different solvents (distilled water, 50% methanol, and methanol) were studied.