Immunosuppressive Resveratrol Aneuploids from Hopea chinensis

Two novel resveratrol aneuploids, hopeachinols A ( 1 ) and B ( 2 ), as well as a potent immunosuppressive polyphenol diptoindonesin G ( 3 ) were characterized from the ethanol extract of Hopea chinensis stem barks. The structure of the polyphenols was accommodated by comprehensive spectroscopic analysis with the absolute stereochemistry determined by the CD approach coupled with theoretical ECD spectra computer‐generated through the Gaussian 03 program. The distinct structure and biological profile of 3 recommended it as a starting molecule for the relevant drug discovery.     

SPCE-微型DPSA-1仪同步快速检测蔬菜中的铅、镉、铜

以优化的微波消解法进行样品预处理,用微型DPSA-1仪结合丝网印刷碳电极,通过微分电位溶出法对蔬菜中的铅、镉、铜进行同步快速检测。结果表明,在1～840μg/L(相当于蔬菜中铅、镉、铜含量为0.0125～10.5mg/kg)范围内呈现良好的线性关系,铅的相关系数为r=0.9977,检出限为0.42μg/L(S/N=3);镉的相关系数为r=0.9976,检出限为0.34μg/L(S/N=3);铜的相关系数为r=0.9958,检出限为1.36μg/L(S/N=3)。研究了检测过程中存在多种干扰离子对于铅、镉、铜检测的干扰情况。试验检测26种蔬菜,所得检测结果与国标检测法进行t检验,无显著差异。与常规的检测技术相比,本法同步检测蔬菜中的铅、镉、铜具有更经济、简便、快速等优点,可实现样品的高比例筛检,还有望作为推广应用于其它类型食品和环境样品中铅、镉、铜快速检测的基础模型,具有很好的应用潜力和广阔的应用前景。     

N掺杂空心TiO2微球的合成与表征

采用无皂乳液聚合合成的聚苯乙烯(PS)微球为模板、氨水/三乙醇胺为催化体系, 通过溶胶-凝胶方法合成了PS/TiO₂(核/壳)复合微球, 然后通过煅烧制备了N掺杂、锐钛型空心TiO₂微球. 在反应体系中三乙醇胺扮演双重角色, 既是TiO₂生成及包覆过程的抑制剂又是空心TiO₂微球的N掺杂剂. 改变氨水、三乙醇胺和钛酸正丁酯用量可控制TiO₂壳的形态和尺寸. 氨水用量增加, PS/TiO₂复合微球的壳表面变得粗糙|三乙醇胺用量增加, 壳表面变得光滑|钛酸正丁酯用量提高导致壳层变厚. 改变三乙醇胺用量可调节空心TiO₂微球中的N掺杂量|N掺杂空心TiO₂微球具有可见光响应和光催化作用.     

Preparative isolation and purification of anti‐tumor agent ansamitocin P‐3 from fermentation broth of Actinosynnema pretiosum using high‐performance counter‐current chromatography

Ansamitocin P‐3 is a potent anti‐tumor maytansinoid found in Actinosynnema pretiosum. However, due to the complexity of the fermentation broth of Actinomycete, how to effectively separate ansamitocin P‐3 is still a challenge. In this study, both analytical and preparative high‐performance counter‐current chromatography were successfully used to separate and purify ansamitocin P‐3 from fermentation broth. A total of 28.8 mg ansamitocin P‐3 with purity of 98.4% was separated from 160 mg crude sample of fermentation broth in less than 80 min with the two‐phase solvent system of hexane–ethyl acetate–methanol–water (0.6:1:0.6:1, v/v/v/v). The purity and structural identification were determined by HPLC, ¹H NMR, ¹³C NMR and mass spectroscopy.     

Morphological evolution and orientation development of stretched iPP films: Influence of draw ratio

Varying the processing conditions of semicrystalline polymers can produce different morphologies of crystallization, which leads to different properties. There have been extensive studies of flow‐induced crystallization on isotactic polypropylene (iPP) using predominantly shear flow. A stretching method, deduced from extrusion, was introduced to study the morphological evolution of elongation‐induced shish‐kebab crystallization. Different morphologies of the resultant samples with different draw ratios (DRs) were carefully investigated and characterized via differential scanning calorimetry, polarizing light microscopy, scanning electron microscopy, atomic force microscopy, and 2D small‐angle X‐ray scattering. In addition, the degree of orientation of the samples with different DRs was also investigated using the 2D wide‐angle X‐ray scattering technique. The results indicate that the elongation‐induced morphology is strongly dependent on the effective stretching flow expressed in terms of the DR, which is defined as the ratio of rates between take‐up and the extrusion. The spherulite is dominant at low DRs, but it starts to deform along the stretching direction with increasing DR. The shish‐kebab structure in the stretched film, composed of stretched chains (shish) and layered crystalline lamellae (kebabs), increases gradually with an increase in the DR, whereas the spherulites gradually decreased. Furthermore, the overall orientation of α‐phase crystals, expressed by the Hermans orientation parameter, is also found to increase dramatically with the DR, and the rate of increase strongly depends on the DR. The different crystal morphologies are attributed to crystallization induced by different elongations of the stretched iPP films. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1223–1234, 2010     

A novel mesogen‐jacketed liquid crystalline electroluminescent polymer with both thiophene and oxadiazole in conjugated side chain

Mesogen‐jacketed liquid crystalline polymers (MJLCPs) with both electron‐transport oxadiazole and hole‐transport thiophene in the side chain were reported for their promising electroluminescent property. Monomers of 2,5‐bis{5‐[(4‐alkoxyphenyl)‐1,3,4‐oxadiazole]thiophen‐2‐yl}styrene (M‐Cm, m is the number of the carbons in the alkoxy groups, m = 8,10) were synthesized and confirmed by ¹H‐NMR, mass spectrometry, and elemental analysis. The corresponding polymers were successfully obtained and characterized by thermal analysis, optical spectroscopy, cyclic voltammetry, electroluminescent analysis, polarized light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD). The polymers exhibited high decomposition temperatures reaching 382 °C and high T_g's reaching 184 °C. The absorption spectra indicated that both the monomers and polymers had little aggregation in film than that in solution, and the absorption spectra of the polymers showed an obvious blue‐shift compared with those of the monomers. Both the monomers and the polymers had blue‐green emission, and the photoluminescence spectra of the polymers in film suggested the formation of excimer or exciplex. The polymers showed lower HOMO energy levels and LUMO energy levels than those of the MJLCPs containing oxadiazole unit reported before. Electroluminescence study with the device configuration of ITO/PEDOT/PVK/polymer/TPBI/Ca/Ag showed maximum brightness and current efficiency of 541 cd/m² and 0.10 cd/A, which proved that the introduction of directly connected electron‐ and hole‐transport units could greatly improve the EL property of side‐chain conjugated polymers. The phase structures of the polymers were confirmed to be smectic A phase through the results of PLM and WAXD. The annealed samples emitted polarized photoluminescence at room temperature, which indicated potential utility for practical applications in display. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1502–1515, 2010     

Preparation and properties of PU/MCMMT nanocomposites

The cetyltrimethyl ammonium bromide (CTAB) was used as a swelling agent to be intercalated into the galleries of the montmorillonite (MMT) platelets to get the organic MMT (CMMT). Then 4,4′‐diphenylmethane diisocyanate (MDI) were grafted on CMMT by the reaction between hydroxyls in organic MMT platelets and MDI to synthesize the MDI modified CMMT (MCMMT). Polyurethane (PU)/MCMMT composites were prepared by situ polymerization. The MCMMT platelets dispersed in a PU matrix in nanometer scale. The dispersion and intercalation degree of the MCMMT platelets decreased with increase in the content of MCMMT. Under the same content of fillers, the tensile strength and tear strength of PU/MCMMT nanocomposites were higher than those of PU/organic MMT nanocomposites. The reinforcing effect of the MCMMT platelets to the PU was better than that of the organic MMT platelets. With increase in the content of MCMMT, the tensile strength and tear strength of the PU/MCMMT nanocomposites were increased, while the extent of the increase slowed down. Compared with those of PU, the thermal stability of PU/MCMMT nanocomposites was increased. Copyright © 2009 John Wiley & Sons, Ltd.     

Micro fabrication of microlens arrays by micro dispensing

In this study, master of the microlens arrays is fabricated using micro dispensing technology, and then electroforming technology is employed to replicate the Ni mold insert of the microlens arrays. Finally, micro hot embossing is performed to replicate the molded microlens arrays from the Ni mold insert. The resin material is used as the dispensing material, which is dropped on a glass substrate. The resin is exposed to a 380 W halogen light. It becomes convex under surface tension on the glass substrate. A master for the microlens arrays is then obtained. A 150‐nm‐thick copper layer is sputtered on the master as an electrically conducting layer. The electroforming method replicates the Ni mold insert from the master of the microlens arrays. Finally, micro hot embossing is adopted to replicate the molded microlens arrays. The micro hot embossing experiment employs optical films of polymethylmethacrylate (PMMA) and polycarbonate (PC). The processing parameters of micro hot embossing are processing temperature, embossing pressure, embossing time, and de‐molding temperature. Taguchi's method is applied to optimize the processing parameters of micro hot embossing for molded microlens arrays. An optical microscope and a surface profiler are utilized to measure the surface profile of the master, the Ni mold insert and the molded microlens arrays. AFM is employed to measure the surface roughness of the master, the Ni mold insert and the molded microlens arrays. The sag height and focal length are determined to elucidate the optical characteristics of the molded microlens arrays. Copyright © 2009 John & Sons, Ltd.     

Phytoquinoids and Secoprezizaane‐Type Sesquiterpenes from Illicium arborescens

A phytochemical investigation of the MeOH extract of Illicium arborescens yielded the two new phytoquinoid epimers, 2,3‐didehydro‐5‐O‐methyl‐11‐epiillifunone E ( 1 ) and 2,3‐didehydro‐5‐O‐methylillifunone E ( 2 ), as well as five new sesquiterpene lactones (8,9‐secoprezizaane‐type sesquiterpenes). Two of them, i.e., 3 and 4 , were minwanensin‐type sesquiterpenes, the other two, i.e., 5 and 6 , had the anisatin‐type (or floridanolide type) skeleton, and the fifth, i.e., 7 , was a dunnianin‐type sesquiterpene. Their structures were established by analyses of 1D‐ and 2D‐NMR, HR‐MS, and chemical evidence. The in vitro cytotoxic activity of compounds 1 – 7 was tested against four human tumor cell lines, including HeLa (cervical epitheloid), WiDr (colon), Daoy (medulloblastoma), and Hep2 (liver carcinoma) human‐tumor cells.