基于腔体滤波器的可调谐微波开关的设计

为了满足无人机数据链路测试中信号转换的需求,提出一种可调谐的S波段分波道微波转换开关设计方案,其中采用开关控制电路对输入微波信号进行分波道选择,两路加载集总电容的三阶方杆梳状腔体滤波器对微波信号进行选频、滤波,同时可通过调节调谐螺钉实现两波道中心谐振频点同频或异频,调谐中心频率范围可达20 MHz,自由度较高;微波开关经参数仿真结果满足设计要求,研制完成的微波开关经过实际测试和应用验证,各项技术指标满足使用要求,同时该微波转换开关具有大功率、低损耗、高隔离度等优点,性能稳定、自由度高、易于实现,可满足无人机数据链测试诊断的信号转接要求。     

小波变换在载频条纹相位分析法中的应用研究

为了克服在非平稳信号分析中傅里叶变换的全局性缺陷,以及窗口傅里叶分析的单一分辨率和伸缩窗口傅里叶分析的尺度不确定性问题,采用伽博解析小波变换技术对空间载频光栅条纹进行相位分析,有效地提取出相对于载频条纹基频的完整相位信息,从本质上解决了上述问题。以三维轮廓术为例,与傅里叶分析进行了对比研究,给出了小波分析应用在空间载频条纹相位分析中详细而完整的理论推导证明、计算机模拟以及实验验证结果。     

碳纳米管束中的正电子理论

采用中性原子叠加模型和有限差分方法(SNA-FD)计算了大范围内不同管径的单壁碳纳米管束中的正电子情况，发现对于单壁碳纳米管束，正电子的主要湮没区域，湮没对象和正电子寿命随碳纳米管管径的不同而发生规律性变化.计算得到管径范围在0.8—1.6nm的碳纳米管束的正电子寿命范围为332—470ps，与实验测得的394ps符合较好.     

High-pressure opens new windows for topological materials

正Recently Guo et al.[1]have performed a systematic simulation on the high-pressure phases of the first experimentally available Weyl semimetals TaAs family.Through such a cheap but powerful technique,they theoretically found a new     

傅里叶变换中红外光谱法检测脑膜瘤的研究

采用傅里叶变换衰减全反射中红外光谱法检测了24例液氮冻存的脑膜瘤离体样品(其中良性肿瘤12例,有恶性倾向的肿瘤12例),对得到的红外光谱进行整理分析,发现不同类型脑膜瘤组织(如纤维型脑膜瘤和内皮型脑膜瘤)的红外光谱存在着差异,并且同一种类型的脑膜瘤组织,其恶性倾向的程度不同,他们的红外光谱也表现出较为明显的区别,因此,我们可以从各个特征吸收峰的峰位、峰形及峰强等信息的变化来区分脑膜瘤,并可以初步鉴别脑膜瘤的性质;研究结果发现,通过某些特征吸收峰(如1 160cm-1)峰位的变化来鉴别脑膜瘤的性质与病理诊断结果的符合率大于85%,说明傅里叶变换衰减全反射中红外光谱法有可能发展成为一种对样品无损伤、快速的脑肿瘤诊断新方法。     

Conversion issues between microwave radiance and brightness temperature

Microwave radiances are usually converted into brightness temperatures for data assimilation and retrievals. The Rayleigh-Jeans approximation has been believed to be a good approximation for the conversion at low frequencies, but inaccurate at high frequencies. However, the simplified radiative transfer models under the Rayleigh-Jeans approximation (hereafter referred as BT-RTE) have been successfully applied in radiance simulations for frequencies below 183 GHz, which has somewhat puzzled the radiative transfer community. This paper clarifies the confusion. In addition, the conversion formula for the third and the fourth Stokes components are derived.Simulations for a polarized sensor, the Special Sensor Microwave Imager and Sounder, show that the BT-RTE is generally accurate. Results for a polarimetric sensor, WINDSAT, show that the third and the fourth Stokes radiances should be converted using the exact conversion formula given in this study rather than using a direct Planck function conversion.     

二维表面浮雕结构的矢量衍射分析

利用等效介质理论,通过严格的耦合波理论计算和分析了二维表面浮雕结构的反射效率与各种因素的关系,给出了不同情况下的变化曲线;同时计算出了该结构在正入射情况下的等效折射率系数。明确提出：不管是对称的还是非对称的二维表面浮雕结构,方位角和极化角的变化对其反射率的影响都不明显;从而得出二维表了雕结构可以实现消偏振、减反的特性。分析了该结构的带宽限制,给出了在给定结构下受限的带宽;同时对浮雕高度加工误差对反射率的影响作了分析,对实际工作有一定的指导意义。     

Immobilization of bovine serum albumin on TiO2 film via chemisorption of H3PO4 interface and effects on platelets adhesion

In the present study, bovine serum albumin (BSA) was successfully covalently immobilized on the surface of anatase TiO₂ film by a three-step method, i.e. application of H₃PO₄ chemisorption to increase surface -OH, which increases the amount of coupling 3-aminopropyl-triethoxylsilane (APTES), thus linking with BSA by imide bond using EDC/NHS/MES. There is no significant -OH group increase on rutile film when using the same method of phosphoric acid treatment, which suggest it is difficult for further chemical modification of the rutile film. After covalent immobilization of BSA on anatase film, an improved hemocompatibility of anti-platelet adhesion and aggregation in vitro could be recognized by LDH and SEM analysis. This study suggests BSA-immobilized anatase surface can serve as hemocompatibility material in vivo.     

Modified adaptive algebraic tomographic reconstruction of gas distribution from incomplete projection by a two-wavelength absorption scheme

A modified adaptive algebraic reconstruction technique (MAART) with an auto-adjustment relaxation parameter and smoothness regularization is developed to reveal the tomographic reconstruction of H 2 O distribution in combustion from incomplete projections. Determinations of relaxation parameter and regularization factor are discussed with regard to the consideration of improvement in reconstruction and reduction of computational burden. A two-wavelength scheme from tunable diode laser absorption measurement, 7444.36 and 7185.59 cm 1 , is used to simplify the nonlinear solution problem for obtaining the tomographic distributions of concentration and temperature simultaneously. Results of calculations demonstrate that MAART can perform the reconstruction results more efficiently with little complex modification and much lower iterations as compared with the traditional algebraic reconstruction technique (ART) or simultaneous iterative reconstruction technique (SIRT) methods. The stability of the algorithm is studied by reconstruction from projections with random noise at different levels to demonstrate the dependence of reconstruction results on precise line-of-sight measurements.     

精确Cosserat弹性杆动力学的分析力学方法

以脱氧核糖核酸和工程中的细长结构为背景, 大变形大范围运动的弹性杆动力学受到关注. 将分析力学方法运用到精确Cosserat弹性杆动力学, 旨在为前者拓展新的应用领域, 为后者提供新的研究方法. 基于平面截面假定, 在弯扭基础上再计及拉压和剪切变形形成精确Cosserat弹性杆模型. 用刚体运动的概念描述弹性杆的变形, 导出弹性杆变形和运动的几何关系; 在定义截面虚位移及其变分法则的基础上, 建立用矢量表达的d’Alembert-Lagrange原理, 在线性本构关系下化作分析力学形式, 并导出Lagrange方程和Nielsen方程, 定义正则变量后化作Hamilton正则方程; 对于只在端部受力的弹性杆静力学, 导出了将守恒量预先嵌入的Lagrange方程, 并讨论了其首次积分. 从弹性杆的d’Alembert-Lagrange原理导出积分变分原理, 在线性本构关系下化作Hamilton原理. 形成的分析力学方法使弹性杆的全部动力学方程具有统一的形式, 为弹性杆动力学的对称性和守恒量的研究及其数值计算铺平道路. 关键词： 精确Cosserat弹性杆 分析动力学方法 变分原理 Lagrange方程