呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.     

An in vitro Study on Transition from NO-Hemoglobin to Methemoglobin： Oxygen Effect

The nitrosyl-hemoglobin (HbNO) is the carrier of nitric oxide (NO) which is the important messenger molecule displaying multiple physiologic and pathophysiologic roles. However it is still not clear for the fate of HbNO molecules during the venous-arterial transit. In this letter, the HbNO transition in vitro was studied by using the electron paramagnetic resonance (EPR) spectra. It was found that HbNO molecules were stable when oxygen did not exist in the system but not stable in aerobic conditions. The absorption spectra further revealed that the methemoglobin (metHb) was the product of HbNO in aerobic environment, showing that the HbNO changed to metHb when there were enough oxygen molecules in the system.     

构元组集损伤断裂模型及其与内聚区模型的比较

结构的响应实质上是材料的响应,宏观结构损伤至断裂的发展过程也是材料性质不断演化的结果.构元组集模型从材料的微观物理变形机制出发,基于对泛函势理论和Cauchy-Born准则,抽象出两种构元:弹簧束构元和体积构元.在微观层次上,结构损伤和断裂的实质都是原子间键合力减弱和丧失的结果,而弹簧束构元是同一方向上的原子键的抽象,因此损伤可以通过弹簧束构元的响应曲线来反映.组集两种构元的响应,建立了材料的弹性损伤本构关系,从而能一致描述材料从弹性到损伤、破坏的发展过程.将构元组集模型的本构关系嵌入ABAQUS的用户材料单元子程序UMAT,实现对结构响应的数值模拟.论文模拟了包含中心预制裂纹三点弯曲梁的裂纹扩展过程,并与内聚区模型比较,给出了内聚区模型所假设的应力-位移关系曲线,并从材料损伤演化的角度对材料裂纹扩展过程做出了物理解释.     

Regulating Oxygen Configuration in Hierarchically Porous Carbon Nanosheets for High-Rate and Durable Na+ Storage

Surface oxygen functionalities (particularly C−O configuration) in carbon materials have negative influence on their electrical conductivity and Na⁺ storage performance. Herein, we propose a concept from surface chemistry to regulate the oxygen configuration in hierarchically porous carbon nanosheets (HPCNS). It is demonstrated that the C−O/C=O ratio in HPCNS reduces from 1.49 to 0.43 and its graphitization degree increases by increasing the carbonization temperature under a reduction atmosphere. Remarkably, such high graphitization degree and low C−O content of the HPCNS-800 are favorable for promoting its electron/ion transfer kinetics, thus endowing it with high-rate (323.6 mAh g⁻¹ at 0.05 A g⁻¹ and 138.5 mAh g⁻¹ at 20.0 A g⁻¹) and durable (96 % capacity retention over 5700 cycles at 10.0 A g⁻¹) Na⁺ storage performance. This work permits the optimization of heteroatom configurations in carbon for superior Na⁺ storage.     

硅单粒子位移损伤多尺度模拟研究

本文结合分子动力学方法和动力学蒙特卡罗方法, 研究了单个粒子入射硅引起的位移损伤缺陷的产生和演化过程; 基于Shockley-Read-Hall理论计算了单个粒子入射引起的位移损伤缺陷导致的泄漏电流增加及其演化过程, 比较了缺陷退火因子与泄漏电流退火因子之间的差异, 并将计算结果与实验值进行了对比. 结果表明, 计算泄漏电流时, 仅考虑一种缺陷的情况下缺陷退火因子与泄漏电流退火因子相同, 考虑两种缺陷类型情况下二者在数值上有所区别, 但缺陷退火因子仍能在一定程度上反映泄漏电流的退火行为. 分子动力学模拟中采用Stillinger-Weber势函数和Tersoff势函数时缺陷退火因子和泄漏电流退火因子与实验结果一致, 基于Stillinger-Weber势函数的计算结果与实验值更为接近.     

Reversibly Switching the Charge State and Adsorption Location of A Single Potassium Atom on Ultrathin CuO Films

Potassium (K) cations are spontaneously formed upon thermal deposition of low‐coverage K onto an ultrathin CuO monolayer grown on Cu(110) and they were explored by low‐temperature scanning tunneling microscopy (STM) and X‐ray photoemission spectroscopy. The formed K cations are highly immobile and thermally stable. The local work function around an individual K cation decreases by 1.5±0.3 eV, and a charging zone underneath it is established within about 1.0 nm. The cationic and neutral states of the K atom are switchable upon application of an STM bias voltage pulse, which is simultaneously accompanied by an adsorption site relocation.     

海藻多糖的组成及结构光谱分析

海藻多糖具有抗凝血等多种生物活性,其活性与多糖的组成结构有关。本文对近年来红藻、褐藻及少量绿藻多糖的单糖组成及含量研究以及FT-IR和12^C NMR两种主要光谱手段对多糖结构研究的结果进行了介绍。     

飞机撞击建(构)筑物研究进展

飞机撞击重要建(构)筑物会导致灾难性后果。本文从试验研究、理论分析、数值模拟等3个方面对飞机撞击建(构)筑物的国内外研究现状,相关研究难点、需要注意的问题和研究方向及趋势进行总结,包括:缩比试验的系统和验证,飞机撞击力模型,撞击所致局部破坏计算公式,飞机和建(构)筑物的精细化建模,撞击所致振动特性,撞击荷载和火荷载对结构的耦合毁伤效应,一般模型和精细化模型、解耦和耦合方法以及不同数值模拟程序计算结果的对比分析等方面,以期为后续研究提供参考。     

多级孔ZSM-5分子筛的制备及催化噻吩烷基化性能研究

用不同浓度的Na₂CO₃溶液处理ZSM-5分子筛,采用XRD、XRF、SEM、N₂吸附脱附及NH₃-TPD方法对处理前后的ZSM-5分子筛进行表征,并考察了Na₂CO₃溶液处理对ZSM-5分子筛孔结构、酸性以及噻吩烷基化性能的影响。结果表明,Na₂CO₃溶液处理在保持ZSM-5分子筛微孔骨架结构的同时,增加了ZSM-5分子筛的比表面积、外表面积和介孔体积,并调变了酸性。Na₂CO₃溶液处理提高了ZSM-5分子筛催化剂的噻吩烷基化活性和噻吩选择性。一定反应条件下,随着Na₂CO₃溶液浓度增加,多级孔ZSM-5分子筛的噻吩烷基化性能逐渐提高,而噻吩选择性先增加后下降。当Na₂CO₃溶液浓度为2 mol/L时,分子筛的噻吩转化率和噻吩选择性分别为81.26 %和73.15%。当Na₂CO₃溶液浓度为3 mol/L时,噻吩转化率和选择性分别为90.57 %和72.59%。     

利用可调谐半导体激光光谱技术对含尘气体中NH3的测量

利用可调谐半导体激光吸收光谱技术(TDLAS)并结合波长调制,在近红外波段1531.7nm处对常温常压下的NH3进行浓度测量.在10 m的长程吸收池内得到了25×10-6的浓度信号,并且在25×10-5-400×10-6浓度范围内二次谐波信号与浓度具有良好的线性关系.讨论了粉尘颗粒对于二次谐波信号的干扰,并提出了利用激光强度线性拟合解决颗粒对气体测量干扰的方法.