Comparative study of pesticide multi-residue extraction in tobacco for gas chromatography-triple quadrupole mass spectrometry

Coacervates made of surfactant aggregates, namely aqueous and reverse micelles and vesicles, were firstly used as solvents in single-drop microextraction (SDME) and proposed for the extraction and concentration of chlorophenols prior to liquid chromatography. The formation of coacervate drops in the needle tip of conventional microsyringes depended on the type of intermolecular forces established between the surfactant headgroups making up the supramolecular aggregates; hydrogen bond interactions were strong enough to permit the formation of spherical drops. Stability of 1-50 microL coacervate drops was achieved by introducing the microsyringe needle tip in a PTFE rod, the end of which had been machined out with a heated flanging-tool to get circular flanges (diameters in the range 3.5-6 mm). The parameters affecting the efficiency of single-drop coacervative microextraction (SDCME) were investigated using vesicular coacervates as a solvent and 2-chlorophenol (CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) as model analytes. Coacervative microextraction dynamics fit to the general rate equation of liquid-liquid extraction. The effect of variables such as extraction time, drop volume, stirring rate, pH and temperature, on the extraction of chlorophenols was similar to that described for organic solvent drops. Electrolyte concentrations above 0.1 M caused drop instability. Under the optimum conditions, detection limits were in the range 0.1-0.3 microg L(-1). The relative standard deviation was between 4.3 and 5.6 at 20 microg L(-1) spiked level. The method was applied to the determination of the four chlorophenols in wastewater, superficial water from a reservoir and groundwater and the recoveries were in the range 79 and 106% at 5-20 microg L(-1) spiked level.     

Spectral,electrochemical and computational investigations on the host–guest interaction of Coumarin-460 with <Emphasis Type="Italic">p</Emphasis>-sulfonatocalix[4]arene

The supramolecular host–guest investigation of Coumarin 460 (C460), a salient coumarin family dye molecule is studied with a noteworthy host molecule, p-sulfonatocalix[4]arene (p-SC4). The investigation is carried out by both experimental and theoretical approach. The binding affinity of C460 with p-SC4 is experimentally studied using absorption, emission, excited state lifetime and Cyclic Voltammetry methods. The binding constant is around 10³ M^??1, which shows potent binding. The binding stoichiometry is 1:1. The binding orientations and binding energies are studied using computational simulations. The mode of binding is also established using NMR spectral techniques.     

Uranium recovery with zinc distillation from a liquid zinc cathode for pyroprocessing

Journal of Radioanalytical and Nuclear Chemistry - U recovery test was performed on a Zn-U alloy to confirm the feasibility of Zn as an alternative cathode material. An evaporation test of pure Zn...     

Applicability of in situ detectors for radiological assessment of strontium-90 in rivers and lakes

Journal of Radioanalytical and Nuclear Chemistry - An in situ detector for radiological assessments of strontium-90 (90Sr) in river and lake water is developed, based on a CaF2(Eu) scintillator,...     

Interfacial Characteristics and Fracture Toughness of Electrolytically Ni-Plated Carbon Fiber-Reinforced Phenolic Resin Matrix Composites

The electrolytic plating of metallic nickel on a carbon fiber surface has been carried out in order to improve the interfacial adhesion and the mechanical properties in carbon fiber/phenolic matrix composite systems. The surface and the mechanical interfacial properties of composites are characterized by X-ray photoelectron spectrometry (XPS), surface free energy, and the critical stress intensity factor (K(IC)). From the experimental results, it is clearly revealed that the oxygen functional groups and the metallic nickel on fibers largely affect the mechanical interfacial behavior of the composites, resulting in increased surface polarity, whereas the nitrogen functional groups have no effect. Also, a good correlation between surface oxygen functional groups and mechanical interfacial properties and between wettability and K(IC) is established and it is found that a 10 A m(-2) current density is the optimum condition for this system. Copyright 2001 Academic Press.     

Comparative studies of various run buffers for chiral capillary electrophoresis using chiral crown ether as a chiral selector

In the capillary electrophoretic separation of primary amine enantiomers using (+)-(18-crown-6)-tetracarboxylic acid (18C6H4) as a chiral selector, the presence of run buffer constituents such as tris(hydroxymethyl)aminomethane (Tris) or Na+ competing with analytes for 18C6H4, diminishes the effectiveness of 18C6H4. In order to determine appropriate buffer systems for 18C6H4, various run buffer cationic components including Tris, 1,3-bis[tris(hydroxymethyl)methylamino]propane, bis(2-hydroxyethyl)iminotris(hydroxymethyl)methane, triethanolamine, tetramethylammonium, and Na+ were compared. Quantitative studies of the effects of the competitive constituents were carried out by measuring the electrophoretic mobilities of histidine as a function of the 18C6H4 concentration. We also derived a simple equation to estimate the optimal chiral selector concentration for a maximum mobility difference in the presence of a competitive inhibitor.     

Chelators for radioimmunotherapy: I. NMR and ab initio calculation studies on 1,4,7,10-tetra(carboxyethyl)-1,4,7,10-tetraazacyclododecane (DO4Pr) and 1,4,7-tris(carboxymethyl)-10-(carboxyethyl)-1,4,7,10-tetraazacyclododecane (DO3A1Pr)

This work describes the modification of the chelating agent 1,4,7,10-tetraazacyclododecane-N,N',N' ',N' "-tetraacetic acid (DOTA) to improve the rate of metal loading for radioimmunotherapy applications. Previous ab initio calculations predicted that the compounds 1,4,7,10-tetra(carboxyethyl)-1,4,7,10-tetraazacyclododecane (DO4Pr) and 1,4,7-tris(carboxymethyl)-10-(carboxyethyl)-1,4,7,10-tetraazacyclododecane (DO3A1Pr) have a ca. 2000-fold improvement in yttrium metal loading rates compared to those of DOTA (Jang, Y. H.; Blanco, M.; Dasgupta, S.; Keire, D. A.; Shively, J. E.; Goddard, W. A., III. J. Am. Chem. Soc. 1999, 121, 6142-6151). In this study, we report the synthesis, purification, (1)H-NMR chemical shift assignments, pK(a) values, metal loading rate measurements, and additional ab initio calculations of these two compounds. The yttrium loading rates of DO3A1Pr are approximately twice those of DOTA, at pH 4.6 and 37 degrees C. The NMR data indicates that the DO4Pr analogue forms a stable type I complex but does not form a type II complex. The new ab initio calculations performed on DO4Pr and DO3A1Pr indicate that the rate-determining step is the deprotonation of the first macrocycle amine proton, not the second proton as assumed in the previous calculations. The new calculations predict an improvement in the rate of metal loading that more closely matches the experimentally observed change in the rate.     

Analysis of dimensionally stable copolyimide with a low‐level residual stress

Copolyimide thin film, which has low‐level stress and stress relaxation induced by water sorption, was characterized for potential applications as an encapsulant, a stress‐relief buffer, and in interlayer dielectrics. The polyimides examined were poly(p‐phenylene pyromellitimide) (PMDA‐PDA) and poly(p‐phenylene biphenyltetracarboximide) (BPDA‐PDA) as well as their random copolyimides with various compositions. These copolyimide films exhibited good combinations of physical and mechanical properties with low thermal expansion coefficients, residual stress, and moisture‐induced stress–relaxation behavior by appropriately selecting the ratios of the dianhydride component. For these polyimides, the residual stress increased in the range of −8.1–7.5 MPa, whereas stress relaxation induced by water uptake decreased in the range of 10.3–4.7 MPa with increasing BPDA contents, respectively. The major factor in determining the magnitude of the stress behavior induced by both the thermal mismatch and water uptake in films should be the morphological factors such as chain rigidity, chain orientation, crystallinity, and microvoids. Their morphological structures were examined by wide angle X‐ray diffraction and a prism coupler, and the thermal properties were measured using a dynamic mechanical thermal analyzer as well as thermomechanical analysis. Overall, the candidate for the low level stress buffer application from the PMDA/BPDA‐PDA copolyimide was the 30/70 (= PMDA/BPDA in molar ratio) copolyimide. This copolyimide showed no residual stress after curing at 400 °C and relatively insensitive stress relaxation to ambient humidity. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 796–810, 2001