Synthesis and characterization of polymer eight-coordinate (enH2)[YIII(pdta)(H2O)](2)·10H2O as well as the interaction of [YIII(pdta)(H2O)]2(2-) with BSA

The eight-coordinate (enH2)[YIII(pdta)(H2O)](2)·10H2O (en=ethylenediamine and H4pdta=1,3-propylenediamine-N,N,N',N'-tetraacetic acid) was synthesized, meanwhile its molecular and crystal structures were determined by single-crystal X-ray diffraction technology. The interaction between [Y(III)(pdta)(H2O)]2(2-) and bovine serum albumin (BSA) was investigated by UV-vis and fluorescence spectra. The results indicate that [YIII(pdta)(H2O)]2(2-) quenched effectively the intrinsic fluorescence of BSA via a static quenching process with the binding constant (Ka) of the order of 10(4). Meanwhile, the binding and damaging sites to BSA molecules were also estimated by synchronous fluorescence. Results indicate that the hydrophobic environments around Trp and Tyr residues were all slightly changed. The thermodynamic parameters (ΔG=-25.20 kJ mol(-1), ΔH=-26.57 kJ mol(-1) and ΔS=-4.58 J mol(-1) K(-1)) showed that the reaction was spontaneous and exothermic. What is more, both ΔH and ΔS were negative values indicated that hydrogen bond and Van der Waals forces were the predominant intermolecular forces between [YIII(pdta)(H2O)]2(2-) and BSA.     

铅离子印迹聚合物的制备、表征及其在水溶液中的吸附行为研究

以Pb2+为模板,壳聚糖为单体,硅胶为载体,γ-(2,3环氧丙氧)丙基三甲氧基硅烷(KH-560)为偶联剂,利用表面分子印迹技术和溶胶-凝胶法制备了Pb2+ 印迹聚合物.采用傅立叶变换红外光谱法(FT-IR)、紫外光谱法、扫描电镜对Pb2+ 印迹和非印迹聚合物的表面形貌和结构进行表征;并用电感耦合等离子体原子发射光谱法考察了吸附酸度、吸附剂用量、静置时间等对聚合物吸附性能的影响;研究了印迹聚合物在混合溶液中对Pb2+ 的选择性,比较了印迹和非印迹聚合物的吸附容量;并提出了印迹聚合物的印迹吸附机理.在最佳吸附酸度pH=4.5时,0.3 g 吸附剂吸附5 h达到平衡,Pb2+印迹聚合物对模板离子具有较高的选择性,其饱和吸附容量是非印迹聚合物的2倍.     

乙烯自由基与臭氧反应的DFT计算研究

采用密度泛函B3LYP/6-311G**水平计算研究了O3氧化乙烯基（C2H3）的机理,全参数优化了反应势能面上各驻点的几何构型,用内禀反应坐标（IRC）计算和频率分析方法,对过渡态进行了验证.结果表明，乙烯基（C2H3）与O3之间有很强的反应活性.     

Synthesis of ratiometric fluorescent nanoparticles for sensing oxygen

A facile reprecipitation-encapsulation method is used for the preparation of ratiometric fluorescent nanoparticles (NPs) for sensing intracellular oxygen. The surface of the NPs is modified in-situ with poly-L-lysine, which renders good biocompatibility and enables easy internalization into living cells. The sensor NPs contain a red fluorescent probe whose fluorescence is sensitive to oxygen with a quenching response of 77 % on going from nitrogen saturation to oxygen saturation, and a reference dye giving a green signal that acts as an oxygen-independent reference. The ratio of the two emissions serves as the analytical information and is sensitive to dissolved oxygen in the 0–43?ppm concentration range. When incorporated into cells, the ratio of the signals increases by 400?% on going from oxygen-saturated to oxygen-free environment.

用于燃料电池的聚乙烯醇/纤维素/聚乙二醇碱性阴离子交换复合膜的制备及性能

通过对聚乙烯醇(PVA)/季铵化羟乙基乙氧基纤维素(QHECE)共混膜进行聚乙二醇(PEG)聚塑化改性, 采用物理-化学交联联用法制备了PVA/QHECE/PEG碱性阴离子交换复合膜. 通过交流(AC)阻抗、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)、 热重分析(TGA)、 气相色谱(GC)和拉伸实验等手段考察了不同PEG添加量对膜的离子电导率、 分子结构、 微观形貌、 热稳定性、 力学强度、 甲醇渗透率和耐碱稳定性等性能. 结果表明, PEG的加入(除最小比例外)提高了膜的离子电导率和力学强度并使其柔韧性增大. 同时, 膜的热稳定性比未添加PEG时提高了40℃. 将PVA/QHECE/PEG膜在80℃, 6 mol/L KOH浓碱溶液中浸渍处理264 h, 膜的电导率从1.06×10^-3 S/cm提高到3.88×10^-3 S/cm, 而膜的外观和力学强度及含水率未发生明显变化, 表明该膜具有很好的耐碱化学稳定性. 此外, 以3 mol/L甲醇溶液为测试目标, 膜的甲醇渗透率<10^-7 cm²/s, 仅为商业用Nafion^®膜的1/20~1/40.     

手性羰基铁体系催化酮的不对称氢转移氢化

手性羰基铁络合物很少被用于芳香酮的不对称氢转移氢化.利用不同的羰基铁络合物与手性双胺双膦配体现场络合,形成手性胺膦铁催化体系.考察了它们对多种芳香酮的不对称氢转移催化氢化性能.结果表明,三核的手性胺膦铁簇合物是催化芳香酮不对称氢转移氢化的较好体系.当用三核的铁簇合物[Et₃NH]⁺[HFe₃(CO)₁₁]^-体系催化1,1-二苯基丙酮的氢化时,最高可获得98%的对映选择性.通过现场红外光谱测定,揣测羰基铁簇合物Fe₃(CO)₁₂在催化反应过程中保持三核的簇合物的簇骼不变.     

Syntheses and Crystal Structures of Homleptic Lanthanide Complexes [C_6H_5COCHC(CH_3)N-(p-ClC_6H_4)]_3Ln(THF)_n (Ln =Yb,Y,Nd)

Three homoleptic lanthanide complexes, [C6H5COCHC(CH3)N(p-ClC6H4)]3Ln(THF)n(n = 0, Ln = Yb(1); n = 0, Ln = Y(2); n = 1, Ln = Nd(3)), were synthesized by amine elimination reaction of Ln[N(SiMe3)2]3 with 1-phenyl-3-N-(p-chlorophenylimino)-1-butanone. These complexes crystallize in triclinic, space group P1 with a = 9.805(3), b = 14.831(6), c = 16.075(6) A, α = 111.996(9), β = 91.570(7), γ = 93.744(6)°, V = 2159.4(13) A3, Z = 2, D3 c = 1.515 g/cm, F(000) = 986, μ(MoKα) = 2.396 mm-1, R = 0.0360 and wR = 0.0850 for 9548 observed reflections with I 2σ(I) for complex 1; a = 9.861(5), b = 14.852(9), c = 16.111(9) A, α = 112.362(13), β = 91.949(11), γ = 93.678(14)°, V = 2173(2) A3, Z = 2, Dc = 1.377 g/cm3, F(000) = 924, μ(MoKα) = 1.570 mm-1, R = 0.0735 and wR = 0.1389 for 8015 observed reflections with I 2σ(I) for complex 2; and a = 9.308(3), b = 15.357(3), c = 17.419(4) A, α = 66.493(13), β = 88.61(2), γ = 86.664(19)°, V = 2279.4(9) A3, Z = 2, Dc = 1.499 g/cm3, F(000) = 1046, μ(MoKα) = 1.364 mm-1, R = 0.0843 and wR = 0.2280 for 8433 observed reflections with I 2σ(I) for complex 3. Each central metal in complexes 1 and 2 is six-coordinated by three nitrogen and three oxygen atoms from three β-ketoiminate ligands to give a distorted octahedral geometry, while the central metal in 3 is seven-coordinated by three nitrogen and three oxygen atoms from three β-ketoiminate ligands and one oxygen atom from the solvated THF molecule to complete a distorted monocapped trigonal prism.     

加速溶剂萃取-多层硅胶柱净化-气相色谱串联三重四级杆质谱法测定土壤和沉积物中的多氯萘

通过制作多氯萘(PCNs)在商品多层硅胶柱上的流出曲线、优化气相色谱质谱参数和利用三重四级杆质谱的多重反应监测模式,应用氘代一氯萘#2作为一氯和二氯代萘的定量内标,建立了基于DB-5MS和Rt-βDEXcst两根色谱柱的同位素稀释测定土壤和沉积物中多氯萘的分析方法,实现了两种高毒性六氯代萘#66和#67的基线分离。18种多氯萘同类物校正曲线在1.0~240μg/L浓度范围的相对响应因子为0.70~5.45,相对标准偏差小于18.5%。方法检出限在0.014~0.858μg/L之间,定量限在0.048~2.862μg/L之间。30 m的Rt-βDEXcst色谱柱方法效果优于60 m的DB-5MS色谱柱,但前者耗时较长。实际样品分析表明,7种PCNs回收率标记物,除一氯代萘约为6%外,其余均大于28%。测试土壤和沉积物样品中以低氯代萘为主。     

含2,6-二(甲基苯并咪唑)吡啶钴、镨配合物的合成、结构、电化学性质和理论计算研究

以2,6-二(甲基苯并咪唑)吡啶和2,2′-联吡啶为配体,合成了一个钴的配合物[Co(mbzimpy)(bipy)Cl]Cl O4·1.3H2O(1)和一个镨的配合物[Pr(mbzimpy)2(NO3)2]Cl O4·2CH3COCH3(2),(mbzimpy=2,6-bis(methylbenzimidazol-2-yl)pyridine,bipy=2,2′-bipyridine)并利用单晶衍射对其结构进行了表征。还对配合物1和2的荧光和电化学性质进行了研究。晶体结构中C-H…O氢键和π-π芳环堆积作用将每个单核分子连接成一个三维的空间结构。配合物1的TD-DFT理论计算的结果表明:实验得到的紫外谱图和理论计算的紫外谱图较好地吻合。通过循环伏安图可以了解金属中心的氧化和还原电子对。在不同偶极矩的溶剂中研究其荧光性能。