STUDIES ON THE MORPHOLOGY OF SOME PERFLUORO (ETHYLENE-PROPYLENE) COPOLYMERS BY SMALL ANGLE LIGHT SCATTERING TECHNIQUE

The crystalline morphology of some FEP copolymers, prepared by different methods, with different hexafluoropropylene (F_6) contents was studied by means of small angle light scattering technique.The results obtained show that the main factors which affect the crystalline morphology are the content of F_6 and the conditions for crystallization. The morphological structure of these copolymers could change from rod-like to spherulitical, as the F_6 content changed from 2% to 14—19% under usual air-quenching condition. However, rod-like crystalline structure would form under very low rate of cooling (0.2℃/min). Some H_v patterns show that fine structure also exists in addition to the two—and three-dimensional spherulites coexisting in the specimens prepared under certain crystallization conditions.     

Fe(0)催化三氯乙酸烯丙酯的环化反应研究

通过对Fe(O)催化烯烃自由基环化反应的研究，发现以Fe(O)为催化剂催化三氯 乙酸烯丙酯分子内自由基环化反应可以高化学选择性得到五元环内酯产物，反应中 不需加入配体。和大多数自由基反应一样，反应温度与催化剂用量对该反应的转化 率和产率有着很大的影响。     

桥联双（甲巯咪唑）化合物的合成和配位性能

研究了桥联双(甲巯咪唑)化合物(Ⅰ_a—Ⅳ_a、Ⅰ_b)的合成和配位性能。UV谱显示Ⅰ_a—Ⅳ_a与UO_2~(2+)离子(硬酸)配位,溶液中形成3:1的配合物。Ⅰ_b与Hg~(2+)、Au~(3+)离子(软酸)配位形成2:1的配合物,用CNDO/2方法计算了各配体分子中原子净电荷密度和HOMO、LUMO能量。     

反应原料组成对单分散苯乙烯微球粒径及其分布的影响

采用分散聚合工艺制备微米级单分散聚苯乙烯微球，并对分散聚合反应的内部影响因素(分散稳定剂、助稳定剂、单体、引发剂)进行了研究．结果表明，随着分散稳定剂和助稳定剂用量的增加，聚苯乙烯微球的粒径减小；随着单体和引发剂用量的增加，聚苯乙烯微球的粒径增大．分散稳定剂和单体用量是影响聚苯乙烯微球粒径分布的两个主要内部因素．     

制备方法对Mg1.9Al0.1Ni合金储氢性能的影响

文中采用机械合金化(MA)和氢化燃烧法(HCS)制备了Mg1.9Al0.1Ni,通过对它们储氢性能的对比研究发现,MA优于HCS.采用MA制得的Mg1.9Al0.1Ni储氢合金具有较高的活性和高储氢量,对PCT结果进行计算,得出温度和氢平衡压的关系式.Mg1.9Al0.1Ni(MA)553K时100s内吸放氢量分别为2.67和2.54 mass%H.用XRD方法进行物相分析,表明添加适量Al没有改变Mg2Ni的物相结构,由于MA能够制备出纳米晶粒,使得Mg1.9Al0.1Ni合金具有更好的储放氢动力学性能.     

粉煤灰与几种酸固相反应特性的表面分析

用扫描电镜．能量色散谱研究了粉煤灰与酸的固相反应过程中表面形貌和化学组成变化特性。室温下粉煤灰分别与HCI、HNO3、H2SO4、HCIO4固相反应后，表面产生直径20—200nm的结晶颗粒或晶柱。反应生成的水溶物结晶体的扫描电镜图像分别呈手指状、龟背形、蛛蛛状、蝙蝠态，分别为氯化铝铁混晶、硝酸铝铁混晶、硫酸铝铁混晶和高氯酸铝铁混晶。粉煤灰是硅、铝、铁等元素的氧化物聚集体，铁铝等氧化物主要分布在颗粒表面，氧化硅主要分布在颗粒内层。用少量酸进行固相反应这些氧化物聚集体可相互剥离，用H2SO4处理粉煤灰优先将铁铝氧化物转化成可溶性硫酸盐。     

The Direct Resolution of the Enantiomers of Four Chiral Pesticides

Cellulose-tris(3,5-dimethylphenylcarbamate)(CDMPC) were synthesized as highperformance liquid chromatography (HPLC) chiral stationary phase(CSP). The successful resolution of four chiral pesticides on the CSP was realized and the influence of the temperature on the separation was studied.     

有机分子与聚电解质静电吸附成膜特性研究

选取多种有机分子及聚电解质，采用静电吸附自组装法制备了聚电解质，聚电解质、聚电解质，有机分子、有机分子，有机分子的复合薄膜，讨论了这些体系的静电吸附成膜特性及其成膜机理．     

Study of Structures and Electronic Properties of Pdn–1Pb and Pdn （n≤8） Clusters

Geometric and electronic properties of Pdn–1Pb and Pdn (n≤8) clusters have been studied by using density functional theory with effective core potentials, focusing on the differences between mono- and bimetallic clusters. The average bond length of Pdn–1Pb (n≤8) bimetallic clusters is longer than that of pure palladium clusters except for n = 2 and 3. The most stable structure of Pdn–1Pb (n≤7) is the singlet where there is at least a Pd or Pb atom on its excited state. The energy gaps of Pd–Pb binary clusters are narrower than those of Pdn clusters, and then the chemical activity is strengthened when Pdn clusters are doped with Pb.     

关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅱ.形态结构变化对力学性能的影响

用X-射线衍射、动态力学测定等手段研究了不同拉伸倍数的超高分子量聚丙烯薄膜的力学性能的变化.以X-射线衍射法并基于串联力学模型的假设得到的各样品的表观晶区模量E_c~(app)约为34-38GPa.样品模量E_b随拉伸倍数增加而逐渐增大,其变化趋势与非晶区取向因子的变化相类似,说明非晶区取向是左右样品模量的重要因素.室温下,69倍拉伸样品的模量为27GPa,约为表观结晶模量的3/4,且其值在-150-160℃的温度范围内没有急剧变化,说明超拉伸明显改善了材料的力学性能及热稳定性.在各拉伸样品中,考虑伸直链结晶生成的可能性,利用并串联力学模型对伸直链结晶的体积分数做了估算,并对X-射线衍射法所得表观结晶模量进行了修正,认为室温下聚丙烯的真正晶区模量约为47GPa.