Crosslinked epoxy materials exhibiting thermal remendablility and removability from multifunctional maleimide and furan compounds

Crosslinked polymeric materials, which exhibit thermal remendability and removability through Diels–Alder (DA) and retro‐DA reactions, were obtained from using multifunctional maleimide and furan compounds as monomers. The synthesized monomers possess low melting points and good solubility in organo solvents to show excellent processing properties. The performance of DA and retro‐DA reactions were demonstrated with DSC and FTIR measurements. High performance of thermal remendablility and removability of the crosslinked materials were observed with SEM and solvent tests. These materials were applicable in advanced encapsulants and structural materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 905–913, 2006     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Hair dye distribution in human hair by ToF-SIMS

A single hair sample preparation protocol modified from reported method was developed and used to prepare longitudinally sectioned hair for ToF-SIMS analysis. Preliminary results demonstrate that ToF-SIMS is capable of providing molecular distribution of fragment ions from intrinsic constituents as well as external chemicals like the hair dye ingredients used in this study. The observation of pPDA and H₂PO₄⁻ penetrating into the internal region of hair might initiate a renewed interest in exposure study.     

Conflict resolution in fuzzy environment

Conflict resolution methodology is discussed with fuzzified Pareto frontier. Four solution concepts, namely, the Nash solution, the generalized Nash solution, the Kalai-Smorodinsky concept, and a solution method based on a special bargaining process are examined. The solutions are also fuzzy, the corresponding payoff values are fuzzy numbers, the membership functions of which are determined. Three particular cases are considered in the paper. Linear, quadratic, and general nonlinear Pareto frontiers with known shape are examined.     

Large area bolometers for millimeter-wave power calibration

An accurate monolithic power meter has been developed for millimeter-wave applications. The detector is a large-area Bismuth bolometer, integrated on a fused-Quartz substrate. It simply measures the temperature change caused by the absorption of millimeter-wave radiation. The power meter is simple to fabricate, inexpensive, and can be easily calibrated using a low-frequency network. The measured responsivity for a 50 bolometer, with an area of 1×1cm, at a bias of 1V. and a video modulation of 100Hz, is 1mV/W. The noise spectrum exhibits a 1/f rolloff till 1KHz, and is limited by the Johnson noise for higher frequencies. The NEP of the detector is 3WHz^–1/2 at a video modulation of 1KHz. It is possible to decrease the current NEP by fabricating bolometers with higher responsivities. Possible application areas are absolute power calibration and localized power density measurements at millimeter and submillimeter wavelengths.     

Coordination Sorption of Urea by Novel Urea Sorbent——Polymer-bound Metal Complexes

Urea can be sorbed by coordination (or complexation)with transitional metalpolyacrylic acid complex and transitional metal-polyacrylamide containing polyethylenepolyamine ligand complexes. The experimental results indicate that the sorbents can sorb about 60mg urea per gram of sorbent at 37℃ and the concentration of urea was 1300.0rag/1 in NaH_2PO_4 and Na_2HPO_4 buffer solution (pH=7.0) and the urea sorption capacity was affected by many factors such as other competive ligands, sorption time, pH and the concentration of urea.     

Preparation and Crystal Structure Determination of the New Intermetallic Compound RbGa3

The compound has tetragonal symmetry, space group I4 m2 with: a=b=6.315(2) and c = 15.000(2) Å and contains 6 formula units. Diffraction data with 0 < 2θ < 50° (MoKα radiation) were collected on a Nonius CAD-4 automatic diffractometer within the octant hkl. The structure was solved by Patterson synthesis and refined by full-matrix least squares to a final R(F) of 4.9% for 159 independent reflections with I > 3σ(I). The structure consists of a stacking of gallium triangular-faced dodecahedra linked to each others through direct and bifurcated Ga? Ga bonds in a non-compact netting leaving room for a sublattice of rubidium atoms with shortened Rb? Rb distances.     

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.