闭排队网络中性能势与无穷小实现因子之间的关系

In this paper,the concept of the infinitesimal realization factor is extended to the parameter-dependent performance functions in closed queueing networks. Then the concepts of realization matrix (its elements are called realization factors) and performance potential are introduced,and the relations between infinitesimal realization factors and these two quantities are discussed. This provides a united framework for both IPA and non IPA approaches. Finally,another physical meaning of the service rate is given.     

生物小分子与铜锌超氧化物歧化酶相互作用的波谱学研究及其应用

本工作以ESR和NMR为主要手段,并结合其它生化方法,考察了氨基酸、核酸碱基、糖等生命基本物质,和抗坏血酸等生命必需物质与钢锌超氧化物歧化酶的相互作用,实验观测到氨基酸、核酸碱基和抗坏血酸在水溶液中可以与酶中的Cu²⁺作用而使其脱离活性部位,以小分子络合物形式游离在溶液中,同时使酶失活,脱离活性部位的Cu²⁺的比例和酶的失活程度取决于小分子配体的加入量及其与Cu²⁺的络合能力。此外,首次尝试使用ESR方法,并借助氨基酸与酶的作用,考察了铜锌超氧化物歧化酶在盐酸胍变性和热变性过程中的构象变化行为,结果表明这一方法是直观而有效的。     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

关于NF-环的构造

研究了无限的ＮＦ－环及有限的ＮＦ－环，并且给出了有限ＮＦ－环的构造．     

Some integral inequalities inN independent variables

Some new linear and nonlinear integral inequalities of Volterra-type inn independent variables are established. They improve and contain the main results of A. Corduneanu^[7] which in turn extend a number of known results in the literature. An application to certain initial value problem of partial differential equation is also indicated.     

在BBO中产生217.3-2 21.4nm高功率和频输出

用Q-YAG激光的三次谐波(355nm)与调谐的Rh·6G染料激光在β-BaB2O4(BBO)晶体中和频,获得217.3～221.4nm连续调谐输出,和频输出的最大能量为250μJ,转换效率为11%.我们还讨论了获取最大和频输出能量的一些实验条件.     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

浅析欧洲绿党政治

上个世纪70年代以来，绿党在欧洲政坛崛起，这是欧洲社会政治变化的一个新现象。绿党力量的上升乃至绿党政治的出现在某种程度上改变了西欧国家现行的政党格局。研究绿党对于我们了解欧洲政治变化以及绿色思潮与生态政治的影响具有重要意义。     

求解无线传感器网络路由问题的蚁群最优化算法及其收敛性

首先将无线传感器网络的路由问题转化成求解最小Steiner树问题,然后给出了求解无线传感器网络路由的蚁群优化算法,并对算法的收敛性进行了证明．最后对找到最优解后信息素值的变化进行了分析．即在限制信息素取值的条件下,当迭代次数充分大时,该算法能以任意接近于1的概率找到最优解,并且当最优解找到后,最优树边上的信息素单调增加,而最优解以外边上的信息素在有限步达到最小值．