EXISTENCE AND UNIQUENESS OF THE SOLUTION FOR NONLINEAR THIRD-ORDER ROBIN BOUNDARY VALUE PROBLEM WITH A TURNING POINT

The paper aims to obtain existence and uniqueness of the solution as well as asymptotic estimate of the solution for singularly perturbed nonlinear third- order Robin boundary value problem with a turning point.In order to achieve this aim,existence and uniqueness of the solution for third-order nonlinear Robin boundary value problem is derived first based on the upper and lower solutions method under relatively weaker conditions.In this manner,the goal of this paper is gained by applying the existence and uniqueness results mentioned above.     

离子注入诱导量子阱界面混合效应的光致荧光谱研究

采用多元芯片方法获得了一系列不同离子注入剂量的GaAsAlGaAs非对称耦合量子阱单元,通过光致荧光谱测量,研究了单纯的离子注入导致的界面混合效应.荧光光谱行为与有效质量理论计算研究表明,Al原子在异质结界面的扩散在离子注入过程中已基本完成,而热退火作用主要是去除无辐射复合中心. 关键词： 量子阱 离子注入 光致荧光谱 界面混合     

碰壁分子的平均速率和平均能量

本文对气体系统内的碰壁分子的平均速率和平均能量为会么会大于系统内分子的平均速率和平均能量进行了定性解释，并求出了这两类不同平均值之间的一般关系，最后针对经典理想气体算出了定量结构。     

超软X射线流气式正比计数管

介绍了一种用于测量183～933eV超软X射线的圆柱形、侧窗式、流气式正比计数管,工作气体是0.11MPa的P-10气体或氦气-丙烷混合气体。计数管内径为φ25mm,直径为φ0.3mm的入射窗是由厚度80～90μgcm~2聚乙烯甲醛制成的。该计数管的特点:(1)薄窗,对软X射线透过率高。(2)流气式,工作寿命长。(3)能量分辨率好。(4)计数率高(1×10~(14)个/s)。(5)可测能区宽(0.183～10keV)。(6)可以方便更换窗膜材料、厚度及窗口直径。近几年来该计数管已经为高强度低能X光源提供较好监测。     

光学薄膜在现代汽车工业中的应用

本文论述应用光学薄膜技术对汽车窗口玻璃和塑料的若干性能进行改进的技术发展水平，这些性能包括塑料表面的硬化，红外区的反射，紫外区的吸收，偏振化作用，双折射，憎水性以及光学角度选择性等，评论等离子体处理和物理蒸汽淀积薄膜工艺近来应用的一些例子。对于物理蒸汽淀积薄膜所提供的异常功能连同实际使用中它们的耐久性作了特殊的强调。     

插值多项式对解析部分的收敛估计

设D是单位圆{z||z|<1},T为单位圆周{z||z|=1}.对于f∈C(T),我们记L_n(f,z)为在n 1次单位根{e~(2kπ/n 1)i}~n_k=0上对f(z)的n次插值多项式.自然的L_n(f,z)在D内解析,因此,当f不能解析延拓到D内时,就不可能保证L_n(f,z)一致收敛于f.甚至,存在着f∈C(T),且f是某个D内解析函数的边值,但L_n(f,z)在T上发散.     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

浅析欧洲绿党政治

上个世纪70年代以来，绿党在欧洲政坛崛起，这是欧洲社会政治变化的一个新现象。绿党力量的上升乃至绿党政治的出现在某种程度上改变了西欧国家现行的政党格局。研究绿党对于我们了解欧洲政治变化以及绿色思潮与生态政治的影响具有重要意义。     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007