WO3/CeO2-ZrO2, a promising catalyst for selective catalytic reduction (SCR) of NOx with NH3 in diesel exhaust

A WO3/CeO2-ZrO2 catalyst system was discovered for selective catalytic reduction of NOx with NH3; the catalyst (10 wt% WO3 loading) showed nearly 100% NOx conversion in a temperature range of 200-500 degrees C, at a space velocity of 90 000 h(-1) in a simulated diesel exhaust containing 550 ppm NOx (NO : NO2 feed ratio at 1.0), 10 vol% H2O and 10 vol% CO2; the catalyst also exhibited high temperature stability.     

Determination of molindone enantiomers in human plasma by high-performance liquid chromatography-tandem mass spectrometry using macrocyclic antibiotic chiral stationary phases

A sensitive and selective bioanalytical assay was developed and validated for the determination of enantiomeric molindone in human plasma using high-performance liquid chromatography-tandem mass spectrometry along with supported liquid extraction procedures. The chiral separation was evaluated and optimized on macrocyclic antibiotic type chiral stationary phases (CSPs) based on teicoplanin aglycone (Chirobiotic TAG) in polar organic, polar ionic, and reversed-phase mode chromatography, respectively. Complete baseline separation was achieved on a Chirobiotic TAG column under isocratic condition in reversed-phase chromatography. The method validation was conducted using a Chirobiotic TAG column (100 mm x 2.1 mm) over the curve range 0.100-100 ng/ml for each molindone enantiomer using 0.0500 ml of plasma sample. The flow rate was 0.8 ml/min and the total run time was 9 min. Supported liquid extraction in a 96-well plate format was used for sample preparation. Parameters including recovery, matrix effect, linearity, sensitivity, specificity, carryover, precision, accuracy, dilution integrity, and stability were evaluated. The intra- and inter-day precision and accuracy of the quality control samples at low, medium, and high concentration levels were RSD 相似文献   

Characterization and biological evaluation of paclitaxel-loaded poly(L-lactic acid) microparticles prepared by supercritical CO2

In this study, paclitaxel loaded poly( L-lactic acid) (PTX-PLLA) microparticles were prepared using solution enhanced dispersion by supercritical CO2(SEDS) technique. This supercritical antisolvent technique offers the advantage of negligible organic solvent residua in the drug loaded microparticles. Scanning electron microscopy (SEM) showed that microparticles exhibited rather spherical shape and small particle size with narrow particle size distribution. X-ray diffraction (XRD) and differential scanning calorimeter (DSC) indicated that PTX was amorphously dispersed in the PLLA matrix. The drug loading and encapsulation efficiency of PTX-PLLA microparticles were 14.33% and 62.68%, respectively. In vitro cytotoxicity evaluation of PTX-PLLA microparticles against nonsmall-cell lung cancer A549 and ovarian cancer SKOV3 cell lines indicated that PTX-PLLA had superior antiproliferation activity against the A549 and SKOV3 cell lines, compared with free PTX formulations. The cellular internalization of fluorescent microparticles was evidenced by fluorescence microscope and further confirmed by transmission electron microscopy (TEM). This was attributed to the efficient intracellular accumulation of PTX via cell phagocytosis and sustained release of PTX from PLLA matrix. The anticancer activity of PTX-PLLA was associated with PTX-induced cell apoptosis such as nuclear aberrations, condensation of chromatin and swelling damage in mitochondria. The cell apoptosis index detected by flow cytometry was higher in PTX-PLLA group than in free PTX. The PTX-PLLA formulation, which was obtained through micronization of PTX and encapsulation of micronized PTX into PLLA simultaneously in the SEDS process, significantly potentiated the anticancer activity of PTX.     

CO adsorption on Ag(100) and Ag/MgO(100)

Theoretical studies of CO adsorption on a two-layer Ag(100) film and on a two-layer Ag film on a MgO(100) support are reported. Ab initio calculations are carried at the configuration interaction level of theory using embedding methods to treat the metal-adsorbate region and the extended ionic solid. The metal overlayer is considered in two different structures: where Ag-Ag distances are equal to the value in the bulk solid, and for a slightly expanded lattice in which the Ag-Ag distances are equal to the O-O distance on the MgO(100) surface. The calculated adsorption energy of Ag(100) on MgO(100) is 0.58 eV per Ag interfacial atom; the Ag-O distance is 2.28 A. A small transfer of electrons from MgO to Ag occurs on deposition of the silver overlayer. CO adsorption at an atop Ag site is found to be the most stable for adsorption on the two-layer Ag film and also for adsorption on Ag deposited on the oxide; CO adsorption energies range from 0.12 to 0.19 eV. The CO adsorption energy is reduced for the Ag/MgO system compared to adsorption on the unsupported metal film thereby providing evidence for a direct electronic effect of the oxide support at the metal overlayer surface. Expansion of the Ag-Ag distance in the two-layer system also reduces the adsorption energy.     

CE-LIF coupled with flow cytometry for high-throughput quantitation of fluorophores in single intact cells

We report a method of coupled CE-LIF detection with flow cytometry for high-throughput determination and quantitation of fluorophores in single intact K562/S (KS) cells. The membrane properties of KS cell including fluophore transport rate and apparent permeability coefficient were further quantitatively characterized. The method has advantages for accurate quantitation and unique capacity of high-throughput analysis. The strategy will be useful for the quantitation of fluorophores in the intact cells, such as measurement of multidrug resistance, quantitation of specific protein expression, and quantitative characterization of protein and enzyme functions.     

Toxicity assessment of heavy metals and organic compounds using CellSense biosensor with E.coli

A new strategy using an arnperometric biosensor with Escherichia coli （E. coli） that provides a rapid toxicity determination of chemical compounds is described. The CellSense biosensor system comprises a biological component immobilized in intimate contact with a transducer which converts the biochemical signal into a quantifiable electrical signal. Toxicity assessment of heavy metals using E.coli biosensors could be finished within 30 min and the 50% effective concentrations （ECso） values of four heavy metals were determined. The results shows that inhibitory effects of four heavy metals to E.coli can be ranked in a decreasing order of Hg^2＋ 〉 Cu^2＋ 〉 Zn^2＋ 〉 Ni^2＋, which accords to the results of conventional bacterial counting method. The toxicity test of organic compounds by using CellSense biosensor was also demonstrated. The CellSense biosensor with E. coli shows a good, reproducible behavior and can be used for reproducible measurements.     

加速溶剂萃取-高效液相色谱法测定土壤中的亚当氏剂

加速溶剂萃取仪(ASE)提取土壤中亚当氏剂残留的最佳条件为:甲醇作提取剂,萃取温度90℃,压力为10689.7kPa(1550psi),样品经提取、浓缩后,以高效液相色谱测定含量.方法简便、快速,对土壤中亚当氏剂的回收率为81.2%～102.5%,相对偏差为5.4%,检出限为0.091mg/L.     

Coupling of CpCr(CO)3 and heterocyclic dithiadiazolyl radicals. synthetic, x-ray diffraction, dynamic NMR, EPR, CV, and DFT studies

The reaction of the 1,2,3,5-dithiadiazolyls (4-R-C(6)H(4)CN(2)S(2))(2) (R = Me, 2a; Cl, 2b; OMe, 2c; and CF3, 2d) and (3-NC-5-tBu-C(6)H(3)CN(2)S(2))(2) (2e) with [CpCr(CO)(3)](2) (Cp = eta(5)-C(5)H(5)) (1) at ambient temperature respectively yielded the complexes CpCr(CO)(2)(eta(2)-S(2)N(2)CC(6)H(4)R) (R = 4-Me, 3a; 4-Cl, 3b; 4-OMe, 3c; and 4-CF(3), 3d) and CpCr(CO)(2)(eta(2)-S(2)N(2)CC(6)H(3)-3-(CN)-5-(tBu)) (3e) in 35-72% yields. The complexes 3c and 3d were also synthesized via a salt metathesis method from the reaction of NaCpCr(CO)(3) (1B) and the 1,2,3,5-dithiadiazolium chlorides 4-R-C(60H(4)CN(2)S(2)Cl (R = OMe, 8c; CF(3), 8d) with much lower yields of 6 and 20%, respectively. The complexes were characterized spectroscopically and also by single-crystal X-ray diffraction analysis. Cyclic voltammetry experiments were conducted on 3a-e, EPR spectra were obtained of one-electron-reduced forms of 3a-e, and variable temperature 1H NMR studies were carried out on complex 3d. Hybrid DFT calculations were performed on the model system [CpCr(CO)(2)S(2)N(2)CH] and comparisons are made with the reported CpCr(CO)(2)(pi-allyl) complexes.     

Synthesis and excited-state photodynamics of a chlorin-bacteriochlorin dyad--through-space versus through-bond energy transfer in tetrapyrrole arrays.

Understanding energy transfer among hydroporphyrins is of fundamental interest and essential for a wide variety of photochemical applications. Toward this goal, a synthetic free base ethynylphenylchlorin has been coupled with a synthetic free base bromobacteriochlorin to give a phenylethyne-linked chlorin-bacteriochlorin dyad (FbC-pe-FbB). The chlorin and bacteriochlorin are each stable toward adventitious oxidation because of the presence of a geminal dimethyl group in each reduced pyrrole ring. A combination of static and transient optical spectroscopic studies indicate that excitation into the Qy band of the chlorin constituent (675 nm) of FbC-pe-FbB in toluene results in rapid energy transfer to the bacteriochlorin constituent with a rate of approximately (5 ps)(-1) and efficiency of >99%. The excited bacteriochlorin resulting from the energy-transfer process in FbC-pe-FbB has essentially the same fluorescence characteristics as an isolated monomeric reference compound, namely a narrow (12 nm fwhm) fluorescence emission band at 760 nm and a long-lived (5.4 ns) Qy excited state that exhibits a significant fluorescence quantum yield (Phif=0.19). F?rster calculations are consistent with energy transfer in FbC-pe-FbB occurring predominantly by a through-space mechanism. The energy-transfer characteristics of FbC-pe-FbB are compared with those previously obtained for analogous phenylethyne-linked dyads consisting of two porphyrins or two oxochlorins. The comparisons among the sets of dyads are facilitated by density functional theory calculations that elucidate the molecular-orbital characteristics of the energy donor and acceptor constituents. The electron-density distributions in the frontier molecular orbitals provide insights into the through-bond electronic interactions that can also contribute to the energy-transfer process in the different types of dyads.     

A Home-made Simple Set-up for Measurement of Electrochemical Surface Tension Spectrum on a Mercury Drop Electrode

A setup for recording surface tension curves at a mercury drop during potential scanning is designed based on photo-sensitive detection system. Surface tension spectrum at Hg drop can be recorded by voltammetric study. A Yb(III)-NO2- catalytic reduction system was used for characterization. The simple, sensitive technique can be expected to provide fresh information on molecular interactions at electrode surfaces.