The 7‐bromo derivative of 2‐amino‐2′‐deoxytubercidin fluorinated at the sugar moiety

The title compound, 2,4‐diamino‐5‐bromo‐7‐(2‐deoxy‐2‐fluoro‐β‐d ‐arabinofuranosyl)‐7H‐pyrrolo[2,3‐d]pyrimidine, C₁₁H₁₃BrFN₅O₃, shows two conformations of the exocyclic C4′—C5′ bond, with the torsion angle γ (O5′—C5′—C4′—C3′) being 170.1 (3)° for conformer 1 (occupancy 0.69) and 60.7 (7)° for conformer 2 (occupancy 0.31). The N‐glycosylic bond exhibits an anti conformation, with χ = −114.8 (4)°. The sugar pucker is N‐type (C3′‐endo; ³T₄), with P = 23.3 (4)° and τ_m = 36.5 (2)°. The compound forms a three‐dimensional network that is stabilized by several intermolecular hydrogen bonds (N—H...O, O—H...N and N—H...Br).     

含X-型液晶基元的液晶高分子的研究

以4,4′-(烷撑二酰氧)二苯甲酰氯和2,5-二羟基-1,4-苯撑双-(对乙氧基苯甲酸酯)为单体,采用低温缩聚方法,合成了含X-型液晶基元和不同柔性链长度的主链型液晶聚合物。聚合物的液晶行为用DSC、偏光显微镜和X-光衍射进行了表征。对于样品升温消光后又重新出现双折射的异常现象,初步认为是加热过程中分子量提高的结果。     

Developments on carbon dioxide reduction: Their promise,achievements, and challenges

CO₂ reduction processes continue to be developed for electrosynthesis, energy storage applications, and environmental remediation. A number of promising materials have shown high activity and selectivity to target reduction products. However, the progress has been mainly at a small laboratory scale, and the technical challenges of large scale CO₂ reduction have not been considered adequately. This review covers recent advancements in catalyst materials and cell designs. The leading materials for CO₂ reduction to a number of useful products are presented with their corresponding cell and reactor designs. The latest efforts to progress to industrially relevant scales are discussed, along with the challenges that must be met for carbon dioxide reduction to be a viable route for mass scale production.     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Chiral coordination polymer as a luminescence sensor for small organic molecules

1. Download high-res image (178KB)
2. Download full-size image

     

SNAP-tag蛋白标签技术与荧光分析法在蛋白原位分析中的联合应用

为将生物体内微观的蛋白行为可视化并以宏观信号呈现出来对蛋白进行实时、动态分析，借助SNAP-tag蛋白标签技术与有机小分子荧光染料，构建了一系列用于活细胞内实时监测目标蛋白的免洗荧光探针。标签蛋白SNAP-tag能够特异性识别探针中的苄基鸟嘌呤，从而使目标蛋白共价连接上荧光团（萘酰亚胺），携带上荧光信使。此外，由于萘酰亚胺从水环境中被牵引至SNAP-tag蛋白的疏水空腔，其荧光信号呈现出2~13倍的增强。通过SNAP-tag标签蛋白与目标蛋白的融合，该荧光探针实现了对活细胞内线粒体蛋白CoX8A及核内蛋白H2B特异性识别，在免洗条件下完成了对目标蛋白的实时追踪及原位分析。     

一步法直接合成有机季铵功能修饰的介孔分子筛SBA-15

以P123 嵌段共聚物为模板剂, 3-三甲基丙基氯化铵三甲氧基硅烷(TMAPS)为修饰剂, 酸性条件下一步法直接合成了有机季铵基团功能修饰的SBA-15, 并通过XRD、TEM、N2吸附-脱附、Raman 光谱等对功能化样品的结构和性质进行了表征, 对一步法合成TMAPS 修饰的SBA-15 的可能反应机理进行了探讨. 修饰后的SBA-15 仍然保持了二维六方特征介孔结构, 随着TMAPS负载量的增大, SBA-15 孔道有序度下降, 孔径、孔容和比表面积也随之下降. 有机季铵基团在SBA-15 孔道表面均匀分散, 可与HAuCl4通过快速离子交换制备Au 颗粒高度分散的Au-SBA-15.     

Stannous oxalate as a novel catalyst for the synthesis of polytrimethylene terephthalate

Stannous oxalate was prepared efficiently and characterized by XRD and FT-IR. It exhibited higher catalytic activity and had profitable effect than tetrabutyl titanate and stannous octoate for the synthesis of polytrimethylene terephthalate (PTT) via esterification-route. Over this catalyst, the degree of esterification of pure terephthalic acid was up to 94.4% at 260°C after 1.5 h, while the intrinsic viscosity and content of terminal carboxyl groups of the corresponding PTT polyester, polymerized at 260°C, 60 Pa for 2 h, was 0.8950 dL/g and 15 mol/t, respectively. Stannous oxalate was a promising catalyst for the synthesis of PTT polyester.     

β微管蛋白中紫杉醇(Taxol)结合腔的性质分析

采用多拷贝同时搜寻法(MCSS), 并结合现有微管抑制剂的SAR及3D-QSAR对β微管蛋白中Taxol(紫杉醇)结合腔的性质进行了分析. 结构研究结果表明, Taxol结合腔以疏水性质为主, 并指出官能团分布的具体位置: 在Phe270上方(Leu361-Pro272-Leu273-Leu228之间)的弧形区域、Asp26羧基下方及其与Glu22羧基之间、M-loop的中部, 以及Asp224内侧且靠近Arg276的胍基的位置. 而Asp224的内侧又是新提出的结合位点. 研究结果符合现有微管抑制剂的SAR, 为现有抗肿瘤药物的结构改造以及小分子微管抑制剂设计提供了理论依据.     

基于二茂铁羧酸配体的镉配合物的合成及结构研究

以二茂铁甲酸根FcCOO^-(Fc=(η⁵-C₅H₅)Fe(η⁵-C₅H₄))为主要配体，合成了3个新的配合物[Na₂Cd( μ₃-η²-FcCOO^-)₂(μ₂-η²-FcCOO^-)₂(CH₃OH)₂]_n (1)、[Cd(phen)(FcCOO^-)(η²-FcCOO)(H₂O)](phen=邻菲咯啉) (2)、[Cd(Det)(η²-FcCOO^-)(FcCOO^-)](H₂O)₂(Det=二乙撑三胺) (3)。测定了配合物的晶体结构。配合物1为单斜晶系，C2/c空间群，二茂铁甲酸根采用μ₃-η²-FcCOO^-和μ₂-η²-FcCOO^-的配位方式将Cd²⁺和Na⁺连接成一维无限链状结构。配合物2和3均为单核结构，单斜晶系，P2₁/c空间群，二茂铁甲酸根都采用 FcCOO^-和η²-FcCOO^-的方式配位。2中phen以双齿螯合形式配位，水分子参与配位，中心镉离子配位数为6。3中Det以三齿螯合形式配位，中心镉离子配位数也为6，但水分子未参与配位。