catena‐Poly[[[pyridinecopper(II)]bis[μ3‐4‐(2‐oxidobenzylideneamino)benzoato]] dimethylformamide disolvate], a polymer composed of dimeric dicopper building units

The title compound, {[Cu(C₁₄H₉NO₃)(C₅H₅N)]·C₃H₇NO}_n or {[Cu₂L₂(py)₂]·2DMF}_n [py is pyridine, L is 4‐(salicylideneamino)benzoate and DMF is dimethylformamide], is composed of dimeric dicopper [CuL(py)]₂ building units, which are interlinked into a one‐dimensional chain through the formation of Cu—O_COO bonds. The dimeric unit is centrosymmetric, containing two Cu^II atoms linked by bridging phenolate O atoms into a Cu₂O₂ plane with a chelating Cu—O bond length of 1.927 (2) Å and a bridging Cu—O bond length of 2.440 (2) Å. Interchain C—H...O and π–π stacking interactions are responsible for an extensive three‐dimensional structure in which the resulting channels are filled by DMF solvent molecules.     

基质辅助激光解吸附飞行时间质谱分析缩合单宁的阳离子化问题

以单价金属离子Cs 和Na 作为离子化试剂,对3种缩合单宁进行基质辅助激光解吸附飞行时间(MALD I-TOF)质谱分析。加入Na 作为阳离子化试剂,能得到较高质量的质谱图。但由于实验通道中几乎不可能完全去除的K 的干扰而会高估棓儿茶酚/表棓儿茶酚单元的组成比例,从而影响对棓儿茶酚/表棓儿茶酚单元存在与否的判断;选择Cs 作为阳离子化试剂可以避免此问题,但在复杂的缩合单宁分析中,同样因为杂质离子Na 和K 的干扰而使得质谱图变得更复杂;未去离子处理直接对缩合单宁进行MALD I-TOF质谱分析与去离子并加入Cs 的处理比去离子并加入Na 能检测到更高聚合度的高聚物,检测到离子峰强度最高的聚合物随离子不同而不同。     

A Selective Cholesterol Biosensor Based on Composite Film Modified Electrode for Amperometric Detection

An amperometric cholesterol biosensor based on immobilization of cholesterol oxidase in a Prussian blue (PB)/polypyrrole (PPy) composite film on the surface of a glassy carbon electrode was fabricated. Hydrogen peroxide produced by the enzymatic reaction was catalytically reduced on the PB film electrode at 0 V with a sensitivity of 39 μA (mol/L)^?1. Cholesterol in the concentration range of 10^?5 ? 10^?4 mol/L was determined with a detection limit of 6 × 10^?7 mol/L by amperometric method. Normal coexisting compounds in the bio‐samples such as ascorbic acid and uric acid do not interfere with the determination. The excellent properties of the sensor in sensitivity and selectivity are attributed to the PB/PPy layer modified on the sensor.     

芳香二磺酸的配位化学研究化合物[Ni(cyclam)(1,5nds)]·1/3H_2O(1)和[Co(cyclam)(H_2O)_2](1,5nds)·2H_2O(2)的合成与结构(英文)

合成了两个二价的过渡金属磺酸化合物,并通过X-射线衍射单晶结构分析进行结构表征。化合物犤Ni(cyclam)(1,5nds)犦·1/3H2O(1)以P2(1)/c空间群结晶,晶胞参数为a=8.583(5),b=10.533(6),c=12.946(7)?,β=92.433(9)°。犤Ni(cyclam)犦2+与两个磺酸基团形成弱配位,从而构筑了一维的配聚物。犤Ni(cyclam)犦2+与磺酸基团之间的作用还通过O2S-O…H-N型氢键进一步被加强。化合物犤Co(cyclam)(H2O)2犦(1,5nds)·2H2O(2)以P1珔空间群结晶,晶胞参数为a=8.738(5),b=9.324(5),c=10.118(5)?,α=81.382(8),β=64.868(8),γ=62.999(8)°。在该化合物中,磺酸基团没有与Co2+形成配位键,而是以平衡离子的形式存在并与配离子形成氢键,构筑了有序的三维结构。     

Synthesis of a Polymer-bound Sensitizer and its Application in the Photoisomerization of trans-Vitamin D_3 to cis-Vitamin D_3

The photochemistry of the vitamin D family and their precursors has been the subject of extensive studies for many years1-4. Most of the studies focus on the photoisomer- ization of 7-dehydrocholesterol and that of tachysterol to previtamin D3, which is of commercial importance in the synthesis of vitamin D34, 5. Recently the cis/trans isomerization of vitamin D analogs (Scheme 1) draws attention because of its importance in the synthesis of hydroxylated vitamin D metabolites6. However, o…     

Size-controlled preparation of Cu2O octahedron nanocrystals and studies on their optical absorption

We report herein the size-controlled preparation of monodispersed cuprous oxide octahedron nanocrystals smaller than 100 nm. The method is based on the reduction of copper nitrate in Triton X-100 water-in-oil (w/o) microemulsions by gamma-irradiation. The average edge length of the octahedron-shaped nanocrystals varies from 45 to 95 nm as a function of the dose rate. The quantum confinement effect was illustrated by the blueshift in the optical absorption. In addition, the growth process was also traced by absorption spectra.     

Synthesis and structures of 5-(pyridyl)tetrazole complexes of Mn(II)

New Mn(II) complexes containing 5-(2-pyridyl)tetrazole, 5-(3-cyano-4-pyridyl)tetrazole or 5-(4-pyridyl)tetrazole ligands are described. The complexes are prepared by reaction of the corresponding cyanopyridines with sodium azide in the presence of Mn(II) salts. All the complexes have been characterized by X-ray crystallography, which reveals that 5-(pyridyl)tetrazole ligands can coordinate to Mn through either type of nitrogen atom in the tetrazole residue or via the pyridyl group. In the solid state, extended 2D and 3D structures are produced through networks of hydrogen bonding (involving water molecules and the tetrazolate residue). Acidification of the complexes produces the corresponding free 5-(pyridyl)-1H-tetrazole.     

A Novel 3‐D Heterobimetallic Cyano‐bridged Coordination Polymer Incorporating Ag···Ag Interaction: [Cu(dien)Ag(CN)2]2[Ag2(CN)3][Ag(CN)2]

A three‐dimensional cyano‐bridged copper(II) complex, [Cu(dien)Ag(CN)₂]₂[Ag₂(CN)₃][Ag(CN)₂] ( 1 ) (dien = diethylenetriamine), has been prepared and characterized by X‐ray crystallography. Complex 1 crystallized in the monoclinic space group P2₁/n with a = 6.988(2), b = 17.615(6), c = 12.564(4) Å, β = 90.790(5)°. The crystal consists of cis‐[Cu(dien)]²⁺ units bridged by [Ag(CN)₂]^— to form a zig‐zag chain. The Ag atoms of the free and bridging [Ag(CN)₂]^— link together to form additional infinite zig‐zag chains with short Ag···Ag distances. The presence of Ag···Ag interactions effectively increases the dimensionality from a 1‐D chain to a 3‐D coordination polymer.     

Hydrogenation of nitrobenzenes catalyzed by platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposite

Platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposites (Pt@G_n-NACl) were prepared and used as catalysts for hydrogenation of nitrobenzenes to anilines with molecular hydrogen under mild conditions. The as-prepared nanoparticles have mean particle size from 2.0 to 5.5 nm, depending on the molar ratio of the metal and the dendrimer. The Pt nanoparticles demonstrate near-monodisperse when the molar ratio of Pt and G₃-NACl is below 30. The interaction among three carboxyl groups terminated at the dendron and the metallic core keeps the Pt nanoparticles from agglomerating. The colloidal solution of Pt nanoparticles stabilized by the dendrimer, in which the molar ratio of Pt/G₃-NACl was less than 60, is stable without precipitation for several weeks. The dendrons attach to the metal core radially, and a substantial fraction of the surface of the metal nanoparticle is unpassivated and available for catalytic reactions. Turnover frequencies for the hydrogenation of nitrobenzenes to anilines change from 353 to 49 h⁻¹ depending on the dendrimer generation and substrates. The dendrimer catalysts are stable during the catalytic hydrogenation process and can be recovered by centrifugation and reused. The results suggest the effectiveness of polyaryl ether trisacetic acid ammonium chloride dendrimer as a stabilizer for the preparation of Pt nanoparticle catalysts.     

Self-assembly and characterization of paclitaxel-loaded N-octyl-O-sulfate chitosan micellar system

N-octyl-O-sulfate chitosan micellar system loaded paclitaxel was prepared by using dialysis method. The critical micelle concentration (CMC) of the modified chitosan was found to be 0.45 mg/ml. Compared with the amount of N-octyl-O-sulfate chitosan, the paclitaxel loading amount in the system was up to 25% (w/w), depending on both of the solvents used in dialysis and the feed weight ratio of paclitaxel to the derivative. The polymeric micelles forming and loading occurred simultaneously in the dialysis process when ethanol and water were utilized as the solvents for paclitaxel and the polymer, respectively. Paclitaxel-loaded micellar system of N-octyl-O-sulfate chitosan was characterized by DSC, WXRD and TEM. TEM photograph revealed that paclitaxel existed as the colloid particulates in ethanol before loading and in the cores of the spherical polymeric micelles after loading. The results of DSC and WXRD indicated that paclitaxel was transferred from the crystalline state to amorphous state after loading. The lyophilized powder of micellar system (25% (w/w) loading) could be reconstituted easily in aqueous media even after 2 months storage at 4 degrees C without the change of paclitaxel entrapment and micelle size. The reconstituted solution (2.1 mg paclitaxel/ml) also showed good stability. The dilution with saline may decrease the loading and physical stability based on the dilution times which was related with CMC of the polymer. In vitro tests showed that paclitaxel was slowly released from micellar solution and the release lasted up to 220 h by means of the dialysis method.