纯锆上离子注入钇和镧后的表面分析

用金属蒸汽真空弧源，以40kV加速电压对纯锆样品分别进行了10¹⁶—10¹⁷/cm²的钇、镧离子注入，注入温度约为130℃.然后对注入样品进行表面分析.x射线光电子能谱分析表明，注入的钇以Y₂O₃形式存在，镧以La₂O₃形式存在.俄歇电子能谱表明，纯锆基体表面的氧化膜厚度随着离子注入剂量的增加而增加，当离子注入剂量达到10¹⁷/cm²时，氧化膜的厚度达到了最大值.卢瑟福背散射显示镧层的厚度约为30nm，同时直接观察到当离子注入剂量为(La+Y)10¹⁷/cm²时，纯锆样品表面发生了严重的溅射. 关键词： 纯锆 钇和镧离子共注入 卢瑟福背散射 x射线光电子能谱     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Cluster and periodic DFT calculations of adsorption and activation of CO2 on the Cu(hkl) surfaces

The adsorption behavior and thermal activation of carbon dioxide on the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces have been investigated by means of density functional theory calculations and cluster models and periodic slabs. According to the cluster models, the optimized results indicate that the basis set of C and O atoms has a distinct effect on the adsorption energy, but an indistinct one on the equilibrium geometry. For the CO₂/Cu(hkl) adsorption systems studied here, the final structure of adsorbed CO₂ is near linear and the preferred modes for the adsorption of CO₂ onto the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces are the side-on adsorption at the cross bridge site with an adsorption energy of 13.06 kJ/mol, the side-on adsorption at the short bridge site (13.54 kJ/mol), and the end-on adsorption on the on-top site with C–O bonds located along the short bridge site (26.01 kJ/mol), respectively. However, the calculated adsorption energies from periodic slabs are lower as compared to the experimental data as well as the cluster model data, indicating that the periodic slab approach of generalized gradient approximation in the density function theory may be not suitable to obtain quantitative information on the interaction of CO₂ with Cu(hkl) surfaces.     

二氯和邻菲罗啉二酮的镍(Ⅱ)、铜(Ⅱ)、锌(Ⅱ)配合物的合成与表征

以ＭＣｌ２和配体Ｌ（Ｌ＝１，１０－菲罗啉－５，６－二酮）为原料，合成了标题配合物ＭＬＣｌ２，Ｍ＝ＮｉⅡ，ＣｕⅡ，ＺｎⅡ，并经元素分析、热谱、ＩＲ和摩尔电导表征．三者均为四配位的电中性配合物，热稳定性高于５００Ｋ，易溶于ＤＭＦ、ＤＭＳＯ和吡啶，可溶于乙腈和水．它们在ＤＭＦ中于３５０ｎｍ和３１５ｎｍ附近显示出强的Ｍ－Ｌ荷移跃迁     

微加工薄膜变形镜特性分析

 借助测量微加工薄膜变形镜驱动器的面形影响函数，分析了驱动器的电压-位移函数和驱动器之间的线性叠加性;通过对连续面形变形镜拟合像差的理论分析和实验研究，建立了微加工薄膜变形镜电压解耦模型。分析了对前36阶Zernike模式的拟合残差和拟合能力，指出微加工薄膜变形镜仅可用来拟合低级像差并且有较大的拟合能力和较小的拟合残差，而不能拟合高级像差。     

气相色谱-质谱联用法测定维生素C泡腾片中的甜蜜素

采用气相色谱-质谱(GC-MS)选择离子监测法(SIM),建立了准确可靠、灵敏度高、快速简便的测定维生素C泡腾片中甜蜜素含量的新方法.样品中的甜蜜素衍生后用有机试剂提取,在选择离子模式下进行测定,以保留时间和特征离子比例进行定性,单离子定量.甜蜜素的线性范围为0.05-10mg/L,检出限为0.6mg/kg,回收率为90.5%-96.9%,相对标准偏差小于4.4%.方法分析所用时间短,结果准确可靠,选择性好,适用于维生素C泡腾片中甜蜜素含量的检验.     

Buckling and free vibration analyses of stiffened plates using the FSDT mesh-free method

This paper presents a mesh-free Galerkin method for the free vibration and stability analyses of stiffened plates via the first-order shear deformable theory (FSDT). The model of a stiffened plate is formed by (1) regarding the plate and the stiffener separately, (2) imposing displacement compatible conditions between the plate and the stiffener so that displacement fields of the stiffener can be expressed in terms of the mid-surface displacement of the plate, and (3) superimposing the strain energy of plate and stiffener. Because there are no meshes used in this method, the stiffeners can be placed anywhere on the plate and need not be placed along the mesh lines. Several numerical examples are computed by this method to show its accuracy and convergence. The present results demonstrate good agreement with the existing solutions given by other researchers and the ANSYS. Influences of support size and order of the complete basis functions on the numerical accuracy are also investigated.     

基于专家动态权重的群组AHP交互式决策方法

为了能在群组决策中得到更为客观和准确的决策结果,在把专家权重划分为静态权重和动态权重的基础上,研究了在交互式决策中专家动态权重的确定方法,给出了共识度的一个定义.在此基础上,研究了群组AHP交互式决策方法中的一致性和相容性检验,给出了基于专家动态权重的群组AHP交互式决策方法流程,最后用一个示例说明了该方法的应用步骤.     

应用马尔科夫状态转移链的作战航空综合体效能评估

文章阐述了作战航空综合体的相关概念及组成,应用马尔科夫状态转移链建立了作战航空综合体完成典型作战任务时的数学模型,确定了作战效能的评估指标,最后通过具体算例检验了模型的正确性和可行性.     

Response to high acidity and basicity at a platinum electrode in chronopotentiometry

A simple and rapid method is developed to determine the high acidity and the basicity of solutions by chronopotentiometry with a platinum working electrode. The acidity range from 5.0 mol/l H⁺ to 1.0 mol/l OH⁻ can be measured by the adjustment of deposition potential and time. The response mechanism to acidity and basicity has been explored. The transition potential plateau in chronopotentiograms is caused from the oxidation of hydrogen adsorbed on electrode surface.